\ifx\documentclass\undefined
  \documentstyle[twoside,11pt,musixdoc,multicol,backgrnd]{report}
\else
  \documentclass[twoside,11pt]{report}
  \usepackage{multicol}
  \usepackage{musixdoc}
  \usepackage{backgrnd}
%  \usepackage[emtex]{changebar}
\fi
\def\musictex{Music\TeX{}}

\startmuflex\makeindex

\begin{document}

%\changebarsep 10 pt
\title{\Huge\bf\musixtex\raise1.5ex\hbox{\large\copyright}\\[\bigskipamount]
\LARGE\bf Using \TeX{} to write polyphonic\\or
instrumental music\\\Large\sl Version T.73~-- \today}
\author{\Large\rm Daniel \sc Taupin\\\large\sl
 Laboratoire de Physique des Solides\\\normalsize\sl
 (associ\'e au CNRS)\\\normalsize\sl
 b\^atiment 510, Centre Universitaire, F-91405 ORSAY Cedex\\ E-mail : {\tt
taupin@lps.u-psud.fr}\\\medskip
 \\\Large\rm Ross \sc Mitchell\\\large\sl
 CSIRO Division of Atmospheric Research,\\\normalsize\sl
 Private Bag No.1, Mordialloc, Victoria 3195,\\ Australia \\\medskip
   \\\Large\rm Andreas \sc Egler\ddag\\\large\sl
   (Ruhr--Uni--Bochum)\\ Ursulastr. 32\\ D-44793 Bochum}
\date{}
%\show\maketitle
\let\endtitleORI\endtitlepage
 \def\endtitlepage{\vfill\noindent $^\ddag$ {\it For personal reasons, Andreas
Egler decided to retire from authorship of this work. Nevertherless, he has
done an important work about that, and I decided to keep his name on this
first page. {\sc D. Taupin}}\endtitleORI}
 \maketitle
\clearpage
 %\check

\thispagestyle{empty}

\null
\vfill

\begin{flushright}\it
%.. All the possible is done,\\
%the impossible is being done,\\
%for miracles I ask for some delay.\\[\smallskipamount]
%{\sc N.N.}\\[\bigskipamount]
%...~time after time~...\\[\smallskipamount]
%{\sc Cindy Lauper}\\[\bigskipamount]
 If you are not familiar with \TeX{} at all\\
I would recommend to find another software\\
package to do musical typesetting.\\
Setting up \TeX{} and \musixtex\\
on your machine and mastering it\\
is an awesome job which gobbles up\\
a lot of your time and disk space.\\[\medskipamount]
But, once you master it...\\[\smallskipamount]
{\sc Hans Kuykens}
\end{flushright}

\begin{center}
 Although one of the authors contested that point once the common work had
begun, \musixtex{} may be freely copied, duplicated and used. However, since
it is intended to be a \ital{freeware} you are not allowed to sell it, and the
fee you may ask for distributing it must be limited to maintenance, support
and duplication costs. You may take parts of it to include in other packages,
but no packages called \musixtex{} may be distributed under this name if
different from the original distribution (except obvious bug corrections or
text font adaptations for specific implementations).

 \musixtex{} may be included in further commercial packages, provided that no
fee is charged for \musixtex{} itself. 
 \end{center}

\clearpage

\setcounter{page}1
\tableofcontents
\setcounter{secnumdepth}3
\pagestyle{headings}

\chapter{What is \musixtex{} ?}

\hrule\smallskip
\section*{Preface}

\noindent Dear user,

This is still a provisional and imperfect version, which means that some
features will be added or corrected. However our intent is to avoid removing
existing commands, in order to spare your own adaptation problems or your
typing time correcting scores you already have in your archive.


Sections marked with a star, or paragraphs marked ``???'' or ``.!.'', indicate
either  that text is partly missing, or that something might change at a
next release.

 \smallskip\hrule\medskip

 \musixtex\ is a set of \TeX\ macros to typeset polyphonic, orchestral or
polyphonic music. Therefore, it is mainly supposed to be used to type wide
scores -- just because true musicians seldom like to have to frequently turn
pages -- and this is not really compatible with \LaTeX's standard page
formats. Even with \verb|A4.sty|, the \verb|\textheight| and \verb|\textwidth|
are too small for musician needs.


However, a \LaTeX\ style has also been provided (and it is used for the
typing of the present paper) but this \verb|musixtex| style is fit for
musicographic books rather than for normal scores to be actually played.

 It should be emphasized that \musixtex\ is not intended to be a
compiler which would translate some \ixem{standard musical
notation}s into \TeX\, nor to decide by itself about aesthetic problems in music typing.
\musixtex\ only typesets staves, notes, chords, beams, slurs and ornaments as
requested by the composer. Since it makes very few typesetting decisions,
\musixtex\ appears to be a versatile and rather powerful tool. However, due
to the important amount of information to be provided to the typesetting
process, coding \musixtex\ might appear to be as awfully complicated as
the real keyboard or orchestral music. It should therefore be interfaced by
some pre-compiler in the case of the composer/typesetter wanting aesthetic
decisions to be automatically made by somebody (or something) else.
%
%\footnote{A short description to all known compilers for \musixtex\ can be
%found on page \pageref{compiler}f.}.

\section{\musixtex\ principal features}
 %\check
 \subsection{Music typesetting is two-dimensional} Most people who have just
learned a bit of music at college, probably think that music is a linear
sequence of symbols, similar to literary texts to be \TeX-ed. On the contrary,
with the exception of strictly monodic instruments like most orchestral wind
instruments and solo voices, one should be aware that
reading music is actually a matricial operation: the non-soloist musician
successively reads \ital{columns} of simultaneous notes which he
plays if he is a pianist, clavichordist or organist, which he reads
and watches if he
conducts an orchestra, and which he is supposed to check and partially play
when he is a soloist who wants to play in time with the accompanying
instrument or choir.

 In fact, our personal experience of playing piano and organ as well as
sometimes helping as an alternate Kapellmeister leads us to think that music
reading and composing is actually a slightly more complicated intellectual
process: music reading, music composing and music thinking seem to be a three
layer process. The musician usually reads or thinks several consecutive notes
(typically a long \ital{beat} or a group of logically connected notes), then
he goes down to the next instrument or voice and finally assembles the whole
to build a sequence of music lasting roughly a few seconds.  He then proceeds
to the next \ital{beat} or \ital{bar} of his score.

 Thus, it appears that the humanly logical way of coding music consists
in horizontally accumulating a set of \ital{vertical combs} with
\ital{horizontal teeth} as described in Table \ref{readtable}.
\def\hboxit#1{\boxit{\rlap{#1}\hphantom{note sequence three}}}
 \begin{table}
 \begin{center}
 \begin{tabular}{|ll|ll|}\hboxit{note sequence one}
  &\hboxit{note seq.\ four}
  &\hboxit{note seq.\ seven}
  &\hboxit{note seq.\ ten}\\\hboxit{note sequence two}
  &\hboxit{note seq.\ five}
  &\hboxit{note seq.\ eight}
  &\hboxit{note seq.\ eleven}\\\hboxit{note sequence three}
  &\hboxit{note seq.\ six}
  &\hboxit{note seq.\ nine}
  &\hboxit{note seq.\ twelve}\\
 \end{tabular}
 \end{center}
 \caption{The order in which a musician reads music}\label{readtable}
 \end{table}
This is the reason
why, in \musixtex\ the fundamental \ital{macro} is of the form
\begin{center}
\verb|\notes ... & ... & ... \enotes|\footnote{Also
available for \keyindex{enotes} is the abbreviation \keyindex{en}.}
\end{center}\index{\&}
\noindent where the character \verb|&| is used to separate the notes to be
typeset on respective staffs of the various instruments, starting from the
bottom.

In the case of an instrument whose score has to be written with
several staffs, these staffs are separated by the
character \|. \index{"|@{\tt\char'174}}
Thus, a score written for a keyboard instrument and
a monodic instrument (for example piano and violin)
will be coded as follows:
\begin{center}
\verb=\notes ... | ... & ...\enotes=
\end{center}
\noindent for each column of simultaneous \ital{groups of notes}.
It is worth emphasizing that we actually said \ital{``groups of notes''}:
this means that in each section of the previous macro, the music typesetter is
welcome to insert, not only chord notes to be played at once, but small
sequences of consecutive notes which build something he understands as a
musical phrase. This is why note typing macros are of two kinds in \musixtex,
namely the note macros which are not followed by spacing afterwards, and those
which induce horizontal spacing afterwards.
 \subsection{The spacing of the notes} It seems that many books have dealt
with this problem. Although it can lead to interesting algorithms, we think it
is not an important point in practice.

In fact, each column of notes has not necessarily the same spacing
and, in principle, this \itxem{spacing} should depend on the shortest
duration of the simultaneous notes. But this cannot be established as a rule,
for at least two reasons:
\begin{enumerate}
 \item spacing does not depend only on the local notes,
but also on the context, at least in the same bar.
 \item in the case of polyphonic music, exceptions can easily be found.
Here is an example:

\begin{music}
\generalmeter{\meterfrac44}
\startextract\NOtes\zhu j\ql h\hl g\hu k\ql f\enotes\endextract
\end{music}
\noindent where it can be clearly seen that the half notes at beats 2 and 3
must be spaced as if they were quarter notes since they overlap, which is
obvious only because of the presence of the indication of the
\itxem{meter} 4/4.
\end{enumerate}
So the typesetter has to take care of good readable spacings on his own.
Therefore, we preferred to provide the composer/typesetter with a
set of macros which can be found in \ref{newspacings}.
 \subsection{Music tokens, rather than a ready-made generator}
The tokens provided by \musixtex\ are:
\begin{itemize}
 \item the note symbols \ital{without stem};
 \item the note symbols \ital{with stems, and hooks for eighth notes and
shorter};
 \item the indication of beam beginnings and beam ends;
 \item the indication of beginnings and ends of ties and slurs;
 \item the indication of accidentals;
 \item the ornaments: arpeggios, trills, mordents, pinc\'es, turns, staccatos
and pizzicatos, fermatas, etc.;
 \item the bars, the meter and signature changes, etc.
\end{itemize}
 Thus, \verb|\wh a| produces an \ital{A (of nominal frequency 222.5~Hz,
unless transposed)} of duration being a
\ital{whole note}. In the same way, \verb|\wh h| produces an \ital{A
(445~Hz)} of duration represented by a \ital{whole note}, \verb|\qu c|
produces a \ital{C (250~Hz approx.)} whose value is a \ital{quarter note with
stem up}, \verb|\cl J| produces a \ital{C (125~Hz approx.)} of
duration equal to an \ital{eighth note with stem down}, etc.

 To generate quarter, eighth, sixteenth, etc. chords, the macro \keyindex{zq}
can be used: it produces a quarter note head, the vertical position of which
is memorized and recalled when another stemmed note (possibly with a hook) is
coded; then the stem is adjusted to link all simultaneous notes. Thus, the
perfect C-major chord, i.e.

\begin{music}
\startextract\NOtes\zq{ceg}\qu j\en\endextract
\end{music}
 \noindent is coded \verb|\zq c\zq e\zq g\qu j| or, in a more concise way,
\verb|\zq{ceg}\qu j| (stem up): in fact, single notes are treated\dots\ like
one-note chords.
 %\check

 \subsection{Beams}
\ital{Beams}\index{beams} are generated using macros which define their
beginning (at the current horizontal position), together with their altitude,
their direction (upper or lower), their multiplicity, their slope and their
reference number. This latter feature -- the reference number -- appears to
be necessary, since one may want to write beams whose horizontal extents
overlap: therefore, it is necessary to specify which beam the notes belong to
and which beam is terminated at a given position.
 \subsection{Setting anything on the score}
A general macro (\keyindex{zcharnote}) provides a means of
putting any sequence of symbols (in fact, some \verb|\hbox{...}|) at any
pitch of any staff of any instrument. Thus, any symbol defined in a font
(letters, math symbols, etc.) can be used to typeset music.
\section{A simple example}
 Before giving more details, we give below an example of the two first
bars of the sonata in C-major KV545 by {\sc Mozart}\index{Mozart, W.A.@{\sc
Mozart, W.A.}}:

\begin{music}
\parindent10mm
\setname1{Piano}
\setstaffs12
\generalmeter{\meterfrac44}
\startextract
\Notes\ibu0f0\qb0{cge}\tbu0\qb0g|\hl j\en
\Notes\ibu0f0\qb0{cge}\tbu0\qb0g|\ql l\sk\ql n\en
\bar
\Notes\ibu0f0\qb0{dgf}|\qlp i\en
\notes\tbu0\qb0g|\ibbl1j3\qb1j\tbl1\qb1k\en
\Notes\ibu0f0\qb0{cge}\tbu0\qb0g|\hl j\en
\endextract
\end{music}
 The \ital{coding} is set as follows:
\begin{quote}\begin{verbatim}
\begin{music}
\parindent10mm
\instrumentnumber{1}       % a single instrument
\setname1{Piano}           % whose name is Piano
\setstaffs1{2}             % with two staffs
\generalmeter{\meterfrac44}% 4/4 meter chosen
\startextract              % starting real score
\Notes\ibu0f0\qb0{cge}\tbu0\qb0g|\hl j\en
\Notes\ibu0f0\qb0{cge}\tbu0\qb0g|\ql l\sk\ql n\en
\bar
\Notes\ibu0f0\qb0{dgf}|\qlp i\en
\notes\tbu0\qb0g|\ibbl1j3\qb1j\tbl1\qb1k\en
\Notes\ibu0f0\qb0{cge}\tbu0\qb0g|\hl j\en
\endextract                 % terminate excerpt
\end{music}
 \end{verbatim}\end{quote}
\begin{itemize}
 \item \verb|\ibu0f0| begins an upper beam, aligned on the
\ital{f}, reference number 0, slope 0
 \item \verb|\tbu0| terminates this beam before writing
the second \ital{g} by means of \verb|\qb0g|
 \item \verb|\qb..| indicates a note belonging to a beam.
 \item \verb|\sk| sets a space between the two quarters in the right
hand, so that the second is aligned with the third eighth of the left hand.
 \item\verb|\qlp| is a quarter with a point.
 \item\verb|\ibbl1j3| begins a double beam, aligned on the \ital{C}
(\verb|j| at this pitch) of slope 15\%.
\end{itemize}

\section{The three pass system}
\TeX's line-breaking procedure implicitly assumes
that a normal line of text will contain many words, so that inter-word
glue need not stretch or shrink too much to justify the line.
This strategy does not work very well for music. If each bar of music
is treated as a word, in the sense that inter-bar glue is placed
at the end of each bar, then the usual result is the appearance of
unsightly gaps before each bar rule. This follows naturally from the
fact that the number of bars per line is normally many fewer
than the number of words in a line of text.

To address the above aim, a three pass system was developed.
On the first pass, information about each bar is written to
an external file, by default \verb|jobname.mx1|.
This file begins with a header listing parameters
such as line width, paragraph indentation, clef, sign and meter widths,
and the first-pass elemental spacing \keyindex{elemskip}.
Width information within the bars is classified either as ``soft'' or ``hard'':
``soft'' widths are those amenable to subsequent rescaling (e.g. a note box),
while ``hard'' widths represent unscalable material such as clef symbols,
key signatures and bar rules.\index{soft width}\index{hard width}

After the first pass, an external routine is run to
determine optimal values of the elemental spacing (\verb|\elemskip|)
for each line, so as to properly fill each line, and to lead to
the piece filling an integral number of lines. This routine was written
in FORTRAN and now converted to C rather than \TeX, the main reason
being the lack of an array
handling capability in \TeX, and the concern that if such a routine
were added to \musixtex, storage problems might be exacerbated.

The resulting routine reads in the file \verb|jobname.mx1|, and writes its
output to \verb|jobname.mx2|. The latter file contains a single entry for
each line of music in the reformatted output. The key piece of information
is the revised value of \keyindex{elemskip} for each line.

Next, the file is re-\TeX-ed. On this third pass,
the \verb|jobname.mx2| file is read in, and the information
used as described above.

To give an easy example: after pass 1 you get the following output:

\begin{music}
\hsize=100mm
\generalmeter{\meterfrac24}%
\parindent 0pt
\setsign1{-3}
\startpiece\bigaccid
\NOtes\qu{ce}\enotes
\bar
\NOtes\qu{gh}\enotes
\bar
\NOtes\qu{=b}\enotes
\Notes\ds\cu g\enotes
\bar
\NOtes\qu{^f=f}\enotes
\raggedstoppiece\contpiece% this is cheated, the problem was to get
%                           pass 1 and pass 3 at the same time
\NOtes\qu{=e}\itied0e\qu{_e}\enotes
\bar
\Notes\ttie0\Qqbu ed{_d}c\enotes
\bar
\Notes\ibu0b{-2}\qb0{=b}\enotes
\notes\nbbu0\qb0{=a}\tqh0N\enotes
\Notes\Dqbu cf\enotes
\raggedstoppiece\contpiece
\NOtes\uptext{\it tr}\qu e\uptext{\it tr}\qu d\enotes
\bar
\NOtes\qu c\qp\enotes
\setdoubleBAR\raggedstoppiece
\end{music}
After running \verb|musixflx| and \TeX-ing the second time you'll get:

\begin{music}
\hsize=100mm
\generalmeter{\meterfrac24}%
\parindent 0pt
\generalsignature{-3}
\startpiece\bigaccid
\NOtes\qu{ce}\enotes
\bar
\NOtes\qu{gh}\enotes
\bar
\NOtes\qu{=b}\enotes
\Notes\ds\cu g\enotes
\bar
\NOtes\qu{^f=f}\enotes
\bar
\NOtes\qu{=e}\itied0e\qu{_e}\enotes
\bar
\Notes\ttie0\Qqbu ed{_d}c\enotes
\bar
\Notes\ibu0b{-2}\qb0{=b}\enotes
\notes\nbbu0\qb0{=a}\tqh0N\enotes
\Notes\Dqbu cf\enotes
\bar
\NOtes\uptext{\it tr}\qu e\uptext{\it tr}\qu d\enotes
\bar
\NOtes\qu c\qp\enotes
\Endpiece
\end{music}
which was coded as:
\begin{verbatim}
\hsize=100mm
\generalmeter{\meterfrac24}%
\parindent 0pt
\generalsignature{-3}
\startpiece\bigaccid
\NOtes\qu{ce}\en\bar
\NOtes\qu{gh}\en\bar
\NOtes\qu{=b}\en
\Notes\ds\cu g\en\bar
\NOtes\qu{^f=f}\en\bar
\NOtes\qu{=e}\itied0e\qu{_e}\en\bar
\Notes\ttie0\Qqbu ed{_d}c\en\bar
\Notes\ibu0b{-2}\qb0{=b}\enotes
\notes\nbbu0\qb0{=a}\tqh0N\enotes
\Notes\Dqbu cf\en\bar
\NOtes\uptext{\it tr}\qu e\uptext{\it tr}\qu d\en\bar
\NOtes\qu c\qp\en\Endpiece
\end{verbatim}
The biggest advantage of using a 3-pass system is the very easy and fast
alteration to the layout which is possible, especially of a long masterpiece,
by changing only one parameter, namely \keyindex{mulooseness}. This value
acts analogous to \TeX's \verb|\looseness| command. For non-\TeX-perts: if you
end a paragraph and state \verb|\looseness=-1| somewhere inside, then
\TeX\ will try to make this paragraph one line shorter than it normally would.

\musixtex\ does the same, but instead for paragraphs, for \ital{sections}.
What is a \ital{section}? As long as you don't force a line break, this means
the whole piece. When you force a line break with either
\keyindex{stoppiece}, \keyindex{endpiece}, \keyindex{zstoppiece},
\keyindex{Stoppiece}, \keyindex{Endpiece}, \keyindex{alaligne}
\keyindex{zalaligne}, \keyindex{alapage} or \keyindex{zalapage} you start a
new \ital{section}. Somewhere\footnote{Advisably, at the beginning or
at the end of the section, for the sake of clarity.}
before the end of the \ital{section}, you can change the value of
\keyindex{mulooseness} to something different from the default of 0.

To give an easy example, changing the last line in the previous example to:
\begin{verbatim}
\NOtes\qu c\qp\en\mulooseness=1\Endpiece
\end{verbatim}
yields:

\begin{music}
\hsize=100mm
\generalmeter{\meterfrac24}%
\parindent 0pt
\generalsignature{-3}
\startpiece\bigaccid
\NOtes\qu{ce}\enotes
\bar
\NOtes\qu{gh}\enotes
\bar
\NOtes\qu{=b}\enotes
\Notes\ds\cu g\enotes
\bar
\NOtes\qu{^f=f}\enotes
\bar
\NOtes\qu{=e}\itied0e\qu{_e}\enotes
\bar
\Notes\ttie0\Qqbu ed{_d}c\enotes
\bar
\Notes\ibu0b{-2}\qb0{=b}\enotes
\notes\nbbu0\qb0{=a}\tqh0N\enotes
\Notes\Dqbu cf\enotes
\bar
\NOtes\uptext{\it tr}\qu e\uptext{\it tr}\qu d\enotes
\bar
\NOtes\qu c\qp\enotes
\mulooseness1\Endpiece
\end{music}
or:
\begin{verbatim}
\NOtes\qu c\qp\en\mulooseness=-1\Endpiece
\end{verbatim}
yields (a little bit tight, but only for the sake of
demonstration of \keyindex{mulooseness}):

\begin{music}
\hsize=100mm
\generalmeter{\meterfrac24}%
\parindent 0pt
\generalsignature{-3}
\startpiece\bigaccid
\NOtes\qu{ce}\enotes
\bar
\NOtes\qu{gh}\enotes
\bar
\NOtes\qu{=b}\enotes
\Notes\ds\cu g\enotes
\bar
\NOtes\qu{^f=f}\enotes
\bar
\NOtes\qu{=e}\itied0e\qu{_e}\enotes
\bar
\Notes\ttie0\Qqbu ed{_d}c\enotes
\bar
\Notes\ibu0b{-2}\qb0{=b}\enotes
\notes\nbbu0\qb0{=a}\tqh0N\enotes
\Notes\Dqbu cf\enotes
\bar
\NOtes\uptext{\it tr}\qu e\uptext{\it tr}\qu d\enotes
\bar
\NOtes\qu c\qp\enotes
\mulooseness-1\Endpiece
\end{music}
Here is the fastest way to get a satisfactory output:
\begin{enumerate}
 \item build up the piece bar\footnote{Or two or three,
whatever you prefer.} by bar. Pay much attention to correct spacings, and go
on only when you are really satisfied with them.
 \item \TeX~$\Longrightarrow$ {\tt musixflx} $\Longrightarrow$ \TeX.
 \item Look at the output and decide if you want to have more or fewer
systems lines, e.g.~to fill the page or to get an even number of
pages.\index{musixflx@{\tt musixflx}}
 \item Adjust \keyindex{mulooseness}. However, {\large\bf beware~:}
\verb|\mulooseness| increases the target number of lines by its value. This is
of no serious trouble for larges pieces, but if you say \verb|\mulooseness=3|
in a piece or in a section which only has 3 bars (three in the musical sense,
i.e. two \verb|\en| in the text), then {\tt musixflx} will not be able to split
3 bars into 4 lines... and it will hopefully result in a diagnostic by {\tt
musixflx}, but possibly also in an arithmetic fault...
 \item Delete the \verb|jobname.mx2| and again\\
\TeX~$\Longrightarrow$ \verb|musixflx| $\Longrightarrow$ \TeX
\quad\ital{(For hackers: watch the difference in {\tt jobname.mx1}!)}
\end{enumerate}
 \noindent If you have really followed this step by step, then your whole
layout will be ready and you will not have to generate \verb|jobname.mx2|
again. This only holds as long as you don't change any spacings.

If you get the warning: \verb|You can't use \raise ...|, than read the upper
paragraph again and follow the instruction of point 5.

There are some more advantages. Without using \ital{glue},
every horizontal position in a line can be computed. This enables using,
e.g.~octave lines, without specifying a dimension, but by saying
\verb|\i...| and \verb|\t...|.


 \subsection{External executable {\tt musixflx}}
One drawback affecting portability between computers is the executable
{\tt musixflx}\index{musixflx@{\tt musixflx}}. We are still searching for
people who are able to compile the C-source and maintain it.

On most computers, the executable is invoked by typing the name of the program
and the name of the file to be acted upon. \ital{i.e.}

\verb|musixflx jobname.mx1|

Optionally, you can add a letter to indicate one of the debug modes, which are:
\begin{quote}
\verb|d | for debug information to screen\\
\verb|f | for debug information to file \verb|jobname.mxl|\\
\verb|s | to get the computed lines immediately on screen
\end{quote}
To allow for ease of use with a batch file, \verb|musixflx| can either be fed
with \verb|jobname.mx1|, \verb|jobname.tex| or only
\verb|jobname|, all of which opens \verb|jobname.mx1|.

 \medskip For large scores (more than 4 pages approximately), having
only one section and an overall value of \verb|\mulooseness| becomes
impractical since one wants not only to have nicely spaced systems, but one
also usually wants to have completely filled pages to avoid empty top and
bottom margins on the last page. It is then wise to force the total number of
pages and maybe the line breaks in each page, which can be done by either using
explicit \keyindex{alapage} and \keyindex{alaligne}, or more automatically by
means of the \keyindex{autolines} command borrowed from \musictex\ and
implemented in the additional {\ttxem{musixcpt.tex}} file.
 \subsection{Restrictions and warnings} If you have worked with \musictex\
before, you must be aware that two main things have changed, namely the
spacing (and spacing commands) and the line breaking, see section~\ref{spacing},
p.~\pageref{spacing} and section~\ref{linebreak} p.~\pageref{linebreak}.

 %\check
 A serious practical problem concerns the effect of unrecorded spaces, such as
those created by source lines not ended by \verb|%| \index{%@{\tt\char37}} or
\keyindex{relax} or another control sequence ending in a letter. These will
result in the dreadful {\bf Overfull hbox} messages appearing during pass 3.

\medskip
\centerline{\boxit{Considerable discipline is needed to avoid this problem!}}

When you start using this software package, you will spend a lot of time
searching for the cause of over/underfull-hbox warnings, which will appear during
pass 3. You may ignore them during pass 1,
but \ital{you must} find their cause when they
appear during pass 3.

In \musixtex\ there is no glue (only $\pm$ 1pt behind \verb|\writesignatures|),
so it works only if every space is recorded in the correct way. As a result,
never use
\verb|\hskip| or \verb|\kern| with the exception of \ital{zero}-boxes, like
\verb|\rlap|, \verb|\llap|, \verb|\zcharnote|, \verb|\uptext|, etc., or
(apparently) fixed length boxes like \verb|\hsong|. But that is not all---all
spacing commands\footnote{Except {\Bslash hardspace} which is an exception and has
the opposite purpose.} must be fed with scalable values
(\ital{e.g.} \verb|\noteskip|, \verb|\elemskip|, \verb|\afterruleskip| and
\verb|\beforeruleskip|, optionally preceded by an integer or decimal number).

\verb|musixflx| can't work if the values of \verb|\noteskip|,
\verb|\afterruleskip|, \verb|\beforeruleskip|, are directly assigned
``hard''\footnote{Hard values are all values  which are not scalable}
values in between
\verb|\startpiece| and \verb|\stoppiece|\footnote{{\Bslash endpiece} has the
same meaning}.\index{hard spacing}

These restrictions make it hardly compatible with most sources designed for
\musictex\footnote{Most examples provided by D. {\sc Taupin} in
\musictex's distribution can be run with \musixtex\ without serious
problems... However, they will eventually have to be corrected for the sake of
compatibility.}. Most of them have to be adjusted to get things going.

Some values are much more important than in \musictex,
namely \verb|\elemskip|, \verb|\afterruleskip| and \verb|\beforeruleskip|.
The ratio between them is especially very important if you use
\keyindex{mulooseness} often to adjust the number of lines:
all of them are multiplied by the same factor in each section.
 %\check
 \subsection{\musixtex's laws}
\begin{enumerate}
 \item Never have a line that doesn't finish either with a control sequence
or with a \verb|%|
inside of \verb|\startpiece...\stoppiece|

\begin{center}
\Large\bf  !!! \musixtex\ forgives NOTHING !!!
\end{center}
   (a space in the default font (using plain-\TeX) causes 3.33pt of unrecorded space,
     but there is only $\pm$ 1pt of glue in \musixtex)
 \item \verb|\off| must be used with relative values, like
  \verb|\noteskip|, \verb|\elemskip|, \verb|\after[before]ruleskip|
 \item \verb|\qsk| and \verb|\hqsk| are now scalable, e.g. \verb|\qsk|
  doesn't mean exactly one note head width (it depends on \verb|\elemskip|
   and \verb|flex_factor|)
 \item Text of songs and any non-\musixtex\ text must be put in zero boxes, like
  \verb|\zcharnote|, \verb|zchar|, \verb|rlap|, \verb|lrlap|, \verb|llap|,
\verb|uptext|, \verb|zsong...|. However, specific features are now provided,
namely \verb|\hardlyrics| and \verb|\hsong| (see \ref{lyrics},
p.~\pageref{lyrics}).
 \item Don't touch either \verb|\noteskip| with hard values,
  or \verb|\after[before]ruleskip| at all inside of
  \verb|\startpiece (\debutmorceau) ... \stop[end]piece (\susp[fin]morceau)|
\end{enumerate}
\section{Some highlights}
 %\check
 \subsection{Signatures}
Signatures can be stated either for all instruments, for example by
\keyindex{generalsignature}\verb|{-2}| which sets two flats on each staff, or
separately for each instrument.

Thus, the \keyindex{generalsignature}
can be partly overridden by
\keyindex{setsign}\verb|2{1}| which puts one
sharp on the staffs of \itxem{instrument number} 2. Of course, the
current signature may change at any time as well as the meters and clefs.
 \subsection{Transposition}
 An important question is: \ital{``can \musixtex\ transpose a score~?''}.
The answer is now 99.5~\% \ital{yes}. If fact, there is an internal register
named \keyindex{transpose} the default value of which is zero, but it may be
set to any reasonable positive or negative value. In that case, it offsets all
symbols pitched with letter symbols by that number of pitch steps. However,
it will neither change the signature nor the local accidentals, and if -- for
example -- you transpose a piece written in $C$ by 1 pitch, \musixtex\ will
not know whether you want it in $D\flat$, in $D$ or in $D\sharp$. This might
become tricky if accidentals occur within the piece, which might have to be
converted into flats, naturals, sharps or double sharps, depending on the new
chosen signature. To avoid this trouble, \ital{relative} accidentals
have been implemented, the actual output of which depends on the pitch of
this accidental and on the current signature.\index{relative accidentals}
 %\check
 \subsection{Selecting special instrument scores}
Another question is: \ital{``can I write an orchestral score and extract the
separate scores for individual instruments~?''} The answer is 95~\%
\ital{yes}: in fact, you can define your own macros
\verb|\mynotes...\enotes|, \verb|\myNotes...\enotes| with as many
arguments as there are in the orchestral score (hopefully this
is less than, or equal to
9, but \TeX perts know how to work around) and change its definition
depending on the selected instrument (or insert a test dependent
on the value of some
selection register). But the limitation is that the numbering of instruments
may change, so that \verb|\setsign3| may have to become \verb|\setsign1| if
instrument 3 is alone. But, in turn, this is not a serious problem for
average \TeX\ wizard apprentices.
 %\check
 \subsection{Variable staff and note sizes}
 Although the standard staff size is 20pt, \musixtex\ allows scores of 16pt
and 24pt staff sizes. In addition, any instrument may have a special staff
size (usually smaller than the overall staff size) and special commands
\verb|\smallnotesize| or \verb|\tinynotesize| enable notes (and also beams or
accidentals) to be of a smaller size, in order to quote optional notes or
\ital{cadenzas}.
 %\check
\section{How to get it}
Primary site is {\tt hprib.lps.u-psud.fr} (anonymous {\tt ftp}); say:

 \verb|cd pub/musixtex|

 \verb|mget musix*.tex| (to get the macros)

 \verb|cd /pub/musixtex/mf|

 \verb|mget *.mf| (to get the source of the fonts)

 \verb|cd /pub/musixtex/tfm|

 \verb|binary|

 \verb|mget *.tfm| (to get the font metrics)

\noindent or:

 \verb|cd /pub/music\_zips|

 \verb|binary|

 \verb|mget musix*.zip| (to get the zipped packages specific to \musixtex)
 
\medskip\noindent Official mirrors are
the CTAN servers. To get it you have tou say:

 \verb|cd ctan| (to go to the CTAN server)

 \verb|cd macros/musixtex/taupin|

 \verb|binary|

 \verb|mget *.zip| (to get the zipped packages)

\medskip The whole \itxem{distribution} can fits into a single 1.2Mbyte or
1.44Mbyte diskette. All sources (including fonts) are provided,
either separately or ``zipped''.

{\sl REMARK: normally, the {\tt musixtex.zip} file expands into binary files
valid for any system, and text files (the \TeX{} and \MF{} sources) in the
\unix{} representation, namely with a ``LF'' character between each record. PC
users might complain that their own coding is ``CR+LF'' (``CR'' usually
appears as a ``{\tt \^{}M}''), but we checked that:
 \begin{itemize}
 \item the \ixem{MS-DOS} editor handles both denotations,
 \item the ``emacs'' and ``microemacs'' also do,
 \item the \TeX{} and \MF{} executable routines (et least the emTeX ones)
also accept both representations.
 \end{itemize}
 However, for the sake of compatibility, we now provide two routines for PC's,
namely {\tt dtou.exe} and {\tt utod.exe}, which convert text/source files
from/to the MS-DOS denotation to/from the \unix{} denotation.
}

 %\check
\section{Enhancements}
 \subsection{Recent easy enhancements} Many enhancements have been asked for,
to the ``father'' of \musixtex, namely \musictex, and this is a proof that it
is considered as useful by many people. Some of these enhancements which
seemed hard were in fact rather easy to implement, for example small notes to
represent grace notes and cadenzas, or gregorian chant features.

 Some of them were more difficult, such as handling of lyrics now provided
since version T.40.
 %\check
 \subsection{Enhancement limitations}
Many requested improvements have not been
\ital{yet} implemented for several reasons:
 \begin{itemize}
   \item The authors' natural laziness (!)
   \item More seriously: many of them would require using some more
registers; unfortunately, \TeX\ registers are not numerous (256 of each
kind and the limit of \keyindex{dimen} registers is nearly reached
(especially using \LaTeX), but we do our best).
   \item We do not think it is wise to introduce in \musixtex\ itself a great
number of macros which would be poorly used by most users: the reason is that
\TeX\ memory and --- moreover --- \TeX\ registers are hardly limited and that
unused macros may occupy many of these, leading to things crashing
because of \verb|TeX capacity exceeded|.

 Therefore, many additional library files are now provided, which may be
invoked or not, depending on the user's specific needs. Most of them are used
to compile this \LaTeXe\ manual... except the {\tt musixadd.tex} and {\tt
musixmad.tex}.
 \end{itemize}
 %\check
  \section{Acknowledgements} The idea of implementing the present package is
due to the previous work (\mutex)\index{mutex@\protect\mutex} of \mbox{Andrea
{\sc Steinbach}} and Angelika {\sc Schofer}\footnote{Steinbach A. \& Schofer
A., \ital{Theses} (1987, 1988), Rheinische Friedrich-Wilhelms Universit\"at,
Bonn, Germany.}. This work provided the basis of the Metafont codes which are
still used here... with 100\% corrections and updates.\index{Schofer, A.@{\sc
Schofer, A.}}\index{Steinbach, A.@{\sc Steinbach, A.}}


 English language is progressivemy checked thanks to Cecil {\sc Churms} from
National Accelerator Center (South Africa).

 %\check
\chapter{Practical use}
\section{Heading statements}
Before any reference to \musixtex\ macros:

\verb|\input musixtex|\footnote{It is highly recommended to build up a format.
If you don't know how to do, you can refer to the same instruction you
perhaps heard or read before: ``Ask you local \TeX-wizard.''. Otherwise
it might be a good idea to look at chapter \ref{installation}
(``Installation'') where some hints are given to build a \musixtex\ format
(ref{formatbuild}).}

 %\check
 \noindent which may be followed by \verb|\input musixadd| in the case you
have more than six instruments or more than 6 simultaneous beams
or ties or slurs.\index{musixtex.tex@{\tt musixtex.tex}}
\index{musixadd.tex@{\tt musixadd.tex}}

 %\check
 After that, you may write a complete book of \TeX\ provided that you do not
use \verb|&| as a tabulation character (its \keyindex{catcode} has been
changed) inside the music score and that you do not overwrite \musixtex's
definitions. This means that no special macros have been designed to help you
write titles, author names, comments, literature excerpts, etc., unless you
use \LaTeX\ with the \verb|musixtex| style.\index{\&}
 %\check
 \section{Before you
begin to write notes}
 \subsection{Warnings for the non \TeX pert}
\begin{quote}

 %\check
When \TeX\ reads a parameter, it inputs one \ital{token}. This means
\ital{one} figure or \ital{one} character or \ital{one}
command\footnote{Syntactically, a \ital{command} is made of a
\ital{backslash} (``{\Bslash}'') immediately followed by sequence of
\ital{letters}.}. If you want to give more than one char or e.g. a negative
number(`-' is one token and a digit is one) or a command which reads another
parameter, then you have to use braces to transfer the parameter correctly.
For example, the command \verb|\meterfrac| reads two parameters; if you want
to declare a $\frac{8}{12}$ timing and you code: \verb|\meterfrac812|, then
you will get a $\frac{8}{1}$ timing and a misplaced ``\verb|2|''. The correct
coding is \verb|\meterfrac{8}{12}| or \verb|\meterfrac8{12}| or
\verb|\meterfrac8{12}|.


 %\check
 The next problem is due to spaces. Spaces are ignored at the
beginning of a line. Spaces are ignored immediately behind a \TeX-command
(they indicate the end of that command unless \TeX\ finds characters which are
not \ital{letters}). All other spaces insert \ital{unexpected} space and
they will cause a lot of trouble during third pass. Same remark holds for end
of lines. Thus \verb|\bar| or \verb|\enotes| as last statement in current line
cause no trouble, because an end of line indicates to \TeX\ the end of a
command.

 %\check
 If you state \verb|\qu g| and start a new line, then you get into trouble, but
if you say \hbox{\verb|\qu g%|\relax
 $<new line><spaces>$}, you have no more problem
and this is better readable.

If this sounds complicated, remember that \TeX\ was designed to typeset
text and not music...

 \end{quote}
 %\check
 \subsection{What you have to specify}\label{whatspecify}
 \leavevmode
 You should first specify whether you want to typeset music in ``normal'' size
(20pt\index{sizes} per staff) or ``small'' size (16pt) or ``large'' size
(24pt). This only optional, the default setting is \keyindex{normalmusicsize}.
If you want the smaller size, then you have to say\footnote{This sets up not
only the size of staff, but also the elementary spacing and the space behind
the bar rule.}  \keyindex{smallmusicsize}, \keyindex{largemusicsize}, and
\keyindex{Largemusicsize} to have the larger sizes of 24pt and 28.8pt.



 Then, the first compulsory declaration is:

 \keyindex{instrumentnumber}\verb|{|$n$\verb|}|

 \noindent where $n$ is the number of instruments, used by
\musixtex\ to performs loops building staffs, setting signatures, meters,
etc. Therefore, it must be defined before any other statements.
If not then default value is one. An instrument
may consist of several staffs, e.g.~the piano. The difference between one
instrument of several staffs and several instruments is as follows:
\begin{itemize}
 \item distinct instruments may have distinct \itxem{signatures}, distinct
staffs of a unique instrument share the same signature.
 \item \itxem{stems} may be hung to \itxem{beams} belonging to differents
staffs of the same instrument.
 \item \itxem{chords} may extend across several staffs of the same
instrument.
 \item staffs of a unique \itxem{instrument} are tied together
with a big brace at the beginning of each line.
\end{itemize}
 If the number of staffs is not
equal to one, this number must be specified by:

 \keyindex{setstaffs} $n$\verb|{|$p$\verb|}|

 \noindent where $p$ is the number of staffs, and where $n$ is the
number of the instrument considered (e.g.~\verb|setstaffs3|
for the 3rd instrument, starting from the bottom).

 %\check
 Unless all your instruments only use the \ital{violin} clef, you
have to specifiy all the clefs used for all the instruments. This is done by
coding:

\keyindex{setclef}\verb|{|$n$\verb|}{|$s_1s_2s_3s_4$\verb|}%|

\noindent where $n$ is the number of the instrument, $s_1$ is one figure
specifying the clef of the lower staff, $s_2$ the clef of the second staff,
etc.

 The value $s_1=0$ means the \ital{violin} clef (G clef or \itxem{clef de
sol} in French) for the lower staff, $s_2=0$ means the violin clef for the
second staff, etc. If $s_2$, $s_3$ or $s_4$ are omitted in the second argument
of the \verb|\setclef|, these staffs have de default clef, namely 0, i.e. the
violin clef.

 The values $s_1=1$ through $s_1=4$
mean the \ital{alto} clef (\itxem{clef d'ut} in French) set on first (lower)
through fourth (next to upper) line of the staff.

 The value $s_1=5$ means the \ital{bass} clef at third (middle) line, and
$s_1=6$ means the usual \ital{bass} clef (F clef or \itxem{clef de fa} in
French) at the usual fourth line.

 If remembering the digits associated with usual clefs seems too difficult,
one can also say 

 \verb|\setclef{|$n$\verb|}{|\keyindex{treble}\verb|}|

\noindent to get the \ixem{violin clef}.
In the same way the most used \itxem{alto clef}
(alto clef on 3rd line) can also be called with


 \verb|\setclef{|$n$\verb|}{|\keyindex{alto}\verb|}|

\noindent and the usual \itxem{bass clef} on fourth line
can also be called with

 \verb|\setclef{|$n$\verb|}{|\keyindex{bass}\verb|}|

\noindent {\sl IMPORTANT: the commands \verb|\alto| and \verb|\bass| only set
these clefs at the first staff. Other staffs still have the default value of
violin clef.}
As an example, a standard piano score
should include:

 \keyindex{setclef}\verb|1{\bass}%| \quad or\quad
 \keyindex{setclef}\verb|1\bass|

\noindent taking account of the fact the the bass clef is set on the lower
staff, but the upper one has the default value of violin clef.
If the signature is not void, one should code:

 \keyindex{generalsignature}\verb|{|$s$\verb|}|

\noindent where $s>0$ indicates the number of \itxem{sharps} in the
signature and $s<0$ the number of \itxem{flats}\footnote{We have seen once a
score in G-minor where the signature consisted of two flats (B and E) plus
one sharp (F). This is not directly supported by \musixtex.}

 If a \itxem{meter} indication is to be posted, it should be
specified using the macro

 \keyindex{generalmeter}\verb|{|$m$\verb|}%|

 %\check
 \noindent where $m$ is the description of the meter indication which should
appear on each staff. If it is a \ital{fraction} (e.g.~3/4) on should code

 \verb|\generalmeter{\meterfrac{3}{4}}%|

\noindent or, in a simpler way (if the numbers are less than 10):

 \verb|\generalmeter{\meterfrac34}%|

You can suppress the beginning vertical rule with saying \keyindex{nostartrule}
and restore the default with \keyindex{startrule} after that.

 Special denotations can be used, such as \keyindex{meterC},
\keyindex{allabreve}, \keyindex{reverseC}, \keyindex{reverseallabreve} and
\keyindex{meterplus}.

 %\check
\begin{music}
\generalmeter\meterC
\nostartrule
\parindent0pt\startpiece
\NOtes\qa{cegj}\enotes
\generalmeter\allabreve\changecontext
\NOTes\ha{ce}\enotes
\generalmeter\reverseC\changecontext
\NOTEs\zbreve g\enotes
\generalmeter\reverseallabreve\changecontext
\NOTEs\zwq g\enotes
\generalmeter{\meterfrac{3\meterplus2\meterplus3}8}\changecontext
\Notes\Tqbu ceg\Dqbl jg\Tqbu gec\enotes
\endpiece
\end{music}
which was coded as:
\begin{quote}\begin{verbatim}
\generalmeter\meterC
\nostartrule
\parindent0pt\startpiece
\NOtes\qa{cegj}\enotes
\generalmeter\allabreve\changecontext
\NOTes\ha{ce}\enotes
\generalmeter\reverseC\changecontext
\NOTEs\zbreve g\enotes
\generalmeter\reverseallabreve\changecontext
\NOTEs\zwq g\enotes
\generalmeter{\meterfrac{3\meterplus2\meterplus3}8}\changecontext
\Notes\Tqbu ceg\Dqbl jg\Tqbu gec\enotes
\endpiece
\end{verbatim}\end{quote}
 However, not all music scores have the same meter in each staff.
Especially, some staffs may have \ital{ternary} meters while others have
\ital{binary}. This can be specified by using the \keyindex{generalmeter} macro
to set the meter for most of the scores and overriding it by:

\keyindex{setmeter}\verb|2{{\meterfrac{12}8}\allabreve}%|

 \noindent which sets the meter to 12/8 for the first (lower)
staff, and \ital{alla breve} for the second staff of the instrument number 2.

Sometimes it might be useful to insert additional space before the meter is
written. This is possible by assigning a value to \keyindex{meterskip} in the
preamble. It is reset to zero after first meter indication.
 \subsection{Instrument names} If you want the \itxem{name of the instrument}s
(or the \itxem{name of the voice}s) to be displayed in front of their
respective staffs at the beginning, you may code:

\keyindex{setname} $n$\verb|{|\ital{name of the instrument}\verb|}%|

 %\check
 \noindent where $n$ is the number of the instrument
considered. In this case, you should also adjust the \keyindex{parindent}
dimension so that the long name of an instrument does not spill too far into
the left margin.
 \subsection{Polyphonic songs}
Except staffs of a unique instrument tied together with a big brace, staffs
normally begin on the left with a thin vertical rule. However, it is usual to
tie all human voices together with a left heavy and right thin vertical rule.

\RuleOn
 \subsubsection{Case of only one choir}
 In the usual case where you have only one choir, this can be specified
by:
\RuleOff
 \begin{quote}
\keyindex{songtop}\verb|{|$n$\verb|}|\\
\keyindex{songbottom}\verb|{|$m$\verb|}|
\end{quote}
\noindent where $m$ and $n$ are the instrument numbers of the first
and last choral voices. Example is shown in \ref{song}.

\RuleOn
 No heavy square brace is produced when the bottom instrument has a number
greater than the top one. This feature can be used to remove choir heavy
braces between distinct parts of the same score.

 \subsubsection{Case of several choirs or several orchestras}
 Your may divide your instruments into up to three groups linked together with
a left square brace. Each of these groups is specified with:
 \begin{quote}
\keyindex{grouptop}\verb|{|$g$\verb|}{|$n$\verb|}|\\
\keyindex{groupbottom}\verb|{|$g$\verb|}{|$m$\verb|}|
\end{quote}
\noindent where $m$ and $n$ are the instrument numbers of the first
and last choral voices of group number $g$. \musixtex{} allows up to three
groups, numbered from 1 to 3, plus the ``zero'' group consisting of the voices
or instruments which belong to no declared group. \verb|\songtop| is equivalent
to \verb|\grouptop 1| and \verb|songbottom| is equivalent to
\verb|\groupbottom 1|.

 This grouping feature can also be used to collect not only voices but also
instruments with one or several staffs. In that case the normal brace is
shifted left of the square havy brace.
 \RuleOff
 %\check
\section{Starting your masterpiece}
 \subsection{Typing the first system}
Just code
\keyindex{startmuflex}

\noindent which opens the \ital{jobname}{\tt .mx1} during \TeX ing the first
time your masterpiece. All informations are now written to it. During pass 3
it will be open for read in and all computed values are used to set the
lines\footnote{The files must be closed before leaving \TeX, preferably before
\keyindex{bye} or \keyindex{end}, with \keyindex{endmuflex}. Normally \TeX\
closes all open files on his own when terminating the program, but it is still
wiser to do this explicitly.}.

\begin{remark} do not worry too much if you forget \verb|\startmuflex|; in most
cases --- since version T.384 --- the \verb|\startpiece| command will do it,
if necessary. Conversely, only the first \verb|\startmuflex| is effective, the
others are inefficient... for safety.
\end{remark}

Then code

 %\check
\keyindex{startpiece}

\noindent which will initiate (with indentation \keyindex{parindent})
the first set of staffs for all instruments you have previously defined. But
that is not sufficient to begin writing notes and silences. In fact, you
must also choose the spacing of the notes.
 \subsection{Easy selecting note spacing}\label{newspacings}
Therefore, we preferred to provide the composer/typesetter with a
set of macros (incidentally, this can be adjusted):
\begin{center}
\tinynotesize
\renewcommand{\arraystretch}{1.5}% I hate LaTeX
\begin{tabular}{|l|l|l@{~~~~}l|}
\multicolumn{1}{c}{usage}&
\multicolumn{1}{c}{spacing}&
\multicolumn{2}{c}{suggested use for}\\\hline
\keyindex{znotes}\verb| ... & ... & ... \enotes|&(non spacing)
  &&specials\\
\keyindex{notes}\verb|  ... & ... & ... \enotes|&\verb=2=\keyindex{elemskip}
  &\ccu1&16th\\
\keyindex{notesp}\verb| ... & ... & ... \enotes|&\verb=2.5\elemskip=
  &\pt1\ccu1&16th pointed, 8th triplet\\
\keyindex{Notes}\verb|  ... & ... & ... \enotes|&\verb=3\elemskip=
  &\cu1&8th\\
\keyindex{Notesp}\verb| ... & ... & ... \enotes|&\verb=3.5\elemskip=
  &\cup1&8th pointed, 4th triplet\\
\keyindex{NOtes}\verb|  ... & ... & ... \enotes|&\verb=4\elemskip=
  &\qu1&4th\\
\keyindex{NOtesp}\verb| ... & ... & ... \enotes|&\verb=4.5\elemskip=
  &\qup1&4th pointed, 2th triplet\\
\keyindex{NOTes}\verb|  ... & ... & ... \enotes|&\verb=5\elemskip=
  &\hu1&2th\\
\keyindex{NOTesp}\verb| ... & ... & ... \enotes|&\verb=5.5\elemskip=
  &\hup1&2th pointed\\
\keyindex{NOTEs}\verb|  ... & ... & ... \enotes|&\verb=6\elemskip=
  &\wh1&1th\\\hline
\end{tabular}\end{center}
\noindent
If you don't like them, define your own using e.g.:

\verb|\def\NOtes{\vnotes5.34\elemskip}|

 %\check
\noindent
which means, when you use this \keyindex{NOtes} definition, that all
\ital{spacing} notes and commands, results a spacing of 5.34 $\times$
\keyindex{elemskip}.
The size of the spatial unit (\keyindex{elemskip}) can be freely
adjusted (it shows only effect outside \verb|\startpiece...\endpiece|).

 In practice, the choice of the macro \verb|\notes|, \verb|\Notes|,
\verb|\NOtes|, etc., to initiate of column of notes sets an
internal dimension register, named \keyindex{noteskip} to the given multiple
of \keyindex{elemskip}. Thus, each \itxem{spacing note} (\keyindex{qu},
\keyindex{qb}, \keyindex{hl}, etc.) will be followed by a spacing of
\keyindex{noteskip}. Then, the advantage of the definition of \verb|\elemskip|
is that, whenever it is changed, all subsequent \verb|\noteskip|s
will be updated proportionally so that a simple change of \verb|\elemskip|
can expand or shrink all consecutive note spacings as a whole.

\medskip
{\bf All said above counts only for first pass.}

\medskip If the arthmetic progression of note spacings does not meet your
wishes, your may force a geometric progression, where {\Bslash Notes} is
$\sqrt{2}$ times wider as {\Bslash notes},  {\Bslash NOtes} is $\sqrt{2}$
times wider as {\Bslash Notes}, etc. In that case, {\Bslash Notesp} is
approximately $\sqrt{\sqrt{2}}=1.189$ times wider as {\Bslash Notes} and so
on. The geometric progression if forced by the command
\keyindex{geometricskipscale}, and the original arithmetic progression is
restored by \keyindex{arithmeticskipscale}.

 Inside the pair \verb|\notes...\enotes| you may freely change the value of
\verb|\noteskip| (not \verb|\elemskip|) provided you keep it scalable in the
normal situation\footnote{But: provided you keep it \ital{not scalable} if
you use the {\Bslash hardnotes} or {\Bslash hardlyrics} features (see
\ref{lyrics}).}. \verb|\noteskip| can be changed with a command like

\verb|\noteskip=2.4\noteskip|

\noindent which obviously keeps it scalable, or by means of

\keyindex{multnoteskip}\verb|{2.4}|

\noindent which performs the same multiplication in a smarter way. You can
also force all \verb|\noteskip|s to be re-scaled by a factor of 3.1415 using

\keyindex{scale}\verb|{2.4}|

\noindent or \verb|\def|\keyindex{scalenoteskip}\verb|{2.4}| which is more
dangerous and not advises although compatible with \musictex.

\medskip

To fill the music line (system) without glue, the values of \verb|\elemskip|,
\verb|\afterruleskip| and \verb|\beforeruleskip| are adjusted from the
external program {\tt musixflx}\index{musixflx@{\tt musixflx}}. So what
spacing you really get, depends on the internal line-breaking routine.

Spacings for advanced \musixtex'ers: a `normal' bar (slightly~!) magnified:
\medskip

 %\check
\begin{music}
\afterruleskip7pt
\beforeruleskip2pt
\parindent0pt
\setclefsymbol1\empty
% special problems afford special solutions
\makeatletter\global\clef@skip\z@ \makeatother
\startpiece
\zchar{16}{\hbox to\afterruleskip{\downbracefill}}%
\zchar{19}{\hbox to\afterruleskip{\hss a\hss}}%
\addspace\afterruleskip
\zchar{16}{\hbox to2\elemskip{\downbracefill}}%
\zchar{19}{\hbox to2\elemskip{\hss b\hss}}%
\zchar{3}{\hbox to\elemskip{\upbracefill}\hbox to\elemskip{\upbracefill}}%
\zchar{-1}{\hbox to\elemskip{\hss e\hss}\hbox to\elemskip{\hss e\hss}}%
\notes\qa l\en
\znotes\en
\zchar{16}{\hbox to4\elemskip{\downbracefill}}%
\zchar{19}{\hbox to4\elemskip{\hss c\hss}}%
\zchar{3}{\hbox to\elemskip{\upbracefill}\hbox to\elemskip{\upbracefill}%
  \hbox to\elemskip{\upbracefill}\hbox to\elemskip{\upbracefill}}%
\zchar{-1}{\hbox to\elemskip{\hss e\hss}\hbox to\elemskip{\hss e\hss}%
  \hbox to\elemskip{\hss e\hss}\hbox to\elemskip{\hss e\hss}}%
\NOtes\qa l\en
\znotes\en
\zchar{16}{\hbox to\beforeruleskip{\downbracefill}}%
\zchar{19}{\hbox to\beforeruleskip{\hss d\hss}}%
\endpiece
\end{music}
\begin{quote}\begin{tabular}{l@{~$\rightarrow$~}l}
a&\keyindex{afterruleskip}\\
b&\keyindex{notes}\verb| = \vnotes 2\elemskip|\\
c&\keyindex{NOtes}\verb| = \vnotes 4\elemskip|\\
d&\keyindex{beforeruleskip}\\
e&\keyindex{elemskip}
\end{tabular}\end{quote}
As default the values are set up as follows:
\begin{quote}\begin{tabular}{lrrr}\hline
\ital{using}&\keyindex{elemskip}&\keyindex{afterruleskip}
  &\keyindex{beforeruleskip}\\\hline
\keyindex{normalmusicsize}&6pt&8pt&0pt\\
\keyindex{smallmusicsize}&4.8pt&6pt&0pt\\\hline
\end{tabular}\end{quote}
\begin{quote}
If you want to change upper values, you have to do that behind
\verb|\normalmusicsize| or \verb|\smallmusicsize| and before
\verb|\startpiece|.
\end{quote}

 %\check
\section{Note pitch specification}
 Note pitches are usually specified by letters ranging from \verb|a| to
\verb|z| for those which are usually written under the G-clef (\verb|a|
corresponds to the $A$ of nominal frequency 222.5~Hz; the \ital{G} of the
G-clef is denoted \verb|g|). Lower pitch notes are specified using upper
case letters ranging from \verb|A| to \verb|N| (the \ital{F} of the F-clef
is denoted \verb|M|, and \verb|F| is one octave below).

 If necessary, a numeric symbol can be used to place a symbol
independently of the active clef, which has the drawback not to be
transposable.

 Besides, notes below \verb|A| (i.e. the $A$ of nominal frequency 55.625~Hz),
namely the lowest octave of the modern pianos, can only be coded using the
transposition features (see below: \ital{transposition} and
\ital{octaviation}) or in absolute vertical position using numbers.
 \section{Writing notes}
There are two major kinds of note macros: \begin{enumerate} \item those
which terminate a note/chord stem and are followed by a horizontal spacing of
value \keyindex{noteskip},
 \item those which initiate or extend a note/chord stem and do not cause
horizontal spacing.
\end{enumerate}
 The first kind is used to type a melody, the second kind is used to
type chords.
 \subsection{Single spacing notes}
\begin{quote}\begin{description}
 \item[\keyindex{wh}~$p$ :]whole note at pitch $p$.
 \item[\keyindex{hu}~$p$ :]half note at pitch $p$ with stem up.
 \item[\keyindex{hl}~$p$ :]half note at pitch $p$ with stem down.
 \item[\keyindex{ha}~$p$ :]half note at pitch $p$ with automatic
stem\footnote{This
means all stems belonging to notes below the third line are stemmed up,
the other down, they work with every clef, but only for single notes.} choice.
 \item[\keyindex{qu}~$p$ :]quarter note at pitch $p$ with stem up.
 \item[\keyindex{ql}~$p$ :]quarter note at pitch $p$ with stem down.
 \item[\keyindex{qa}~$p$ :]quarter note at pitch $p$ with ``automatic'' stem.
 \item[\keyindex{cu}~$p$ :]eighth note\footnote{The {\Bslash c} of this macro
 name is taken from the French word ``croche'' which is by the way one
 half of the english ``crotchet''; {\Bslash cc...}, {\Bslash ccc...}
 are standing for ``double croche'', ``triple croche'', etc.}
 at pitch $p$ with stem up.
 \item[\keyindex{cl}~$p$ :]eighth note at pitch $p$ with stem down.
 \item[\keyindex{ca}~$p$ :]eighth note at pitch $p$ with ``automatic'' stem.
 \item[\keyindex{ccu}~$p$ :]sixteenth note at pitch $p$ with stem up.
 \item[\keyindex{ccl}~$p$ :]sixteenth note at pitch $p$ with stem down.
 \item[\keyindex{cca}~$p$ :]sixteenth note at pitch $p$ with ``automatic'' stem.
 \item[\keyindex{cccu}~$p$ :]32-th note at pitch $p$ with stem up.
 \item[\keyindex{cccl}~$p$ :]32-th note at pitch $p$ with stem down.
 \item[\keyindex{ccccu}~$p$ :]64-th note at pitch $p$ with stem up.
 \item[\keyindex{ccccl}~$p$ :]64-th note at pitch $p$ with stem down.
\end{description}\end{quote}
 As an example, the sequence:

 %\check
\begin{music}
\startextract
\Notes\cu c\cl j\enotes\bar
\Notes\ccu c\ccl j\enotes\bar
\Notes\cccu c\cccl j\enotes\bar
\Notes\ccccu c\ccccl j\enotes
\endextract
\end{music}
 \noindent was coded as:
\begin{quote}\begin{verbatim}
\Notes\cu c\cl j\enotes\bar
\Notes\ccu c\ccl j\enotes\bar
\Notes\cccu c\cccl j\enotes\bar
\Notes\ccccu c\ccccl j\enotes
\end{verbatim}\end{quote}
 If these notes are preceded by \ital{non-spacing} notes (i.e.
macros \keyindex{zq} or \keyindex{zh}) their stem is extended up or down so
as to join all notes into a single chord.
 \subsection{Non-spacing (chord) notes}
\begin{quote}\begin{description}
 \item[\keyindex{zq}~$p$ :]quarter (or shorter) note head at pitch $p$ with no
spacing after.
 \item[\keyindex{zh}~$p$ :]half note head at pitch $p$ with no spacing after.
\end{description}\end{quote}
 It must be pointed out that the pitch $p$ of these notes is
memorized so that the stem of the further spacing note will join them into
a chord. This stem top and bottom pitch is \ital{reset} at each spacing
note.

 \begin{remark} Notes of duration longer than whole notes are
always non-spacing. This saves one useless definition, since these notes are
always longer than other simultaneous ones. If needed they can be followed by
\keyindex{sk} to force spacing.
\end{remark}

 \subsection{Shifted non-spacing (chord) heads} These symbols are used mainly
in chords where \ital{second} intervals are present. It is the
responsibility of the typist to choose which heads should be shifted left or
right.

\begin{quote}\begin{description}
\item[\keyindex{rw}~$p$ :]whole note head shifted right by one note
width ($\approx$ 6pt), no spacing.
\item[\keyindex{lw}~$p$ :]whole note head shifted left by one note
width ($\approx$ 6pt), no spacing.
\item[\keyindex{rh}~$p$ :]half note head shifted right by one note
width ($\approx$ 6pt), no spacing.
\item[\keyindex{lh}~$p$ :]half note head shifted left by one note
width ($\approx$ 6pt), no spacing.
\item[\keyindex{rq}~$p$ :]quarter note head shifted right by one note
width ($\approx$ 6pt), no spacing.
\item[\keyindex{lq}~$p$ :]quarter note head shifted left by
one note width ($\approx$ 6pt), no spacing.
\end{description}\end{quote}
 %\check

 Except that they are shifted left of right, these macros act like
\verb|\z...| macros for stem building.
 \subsection{Single non-spacing notes}
\begin{quote}\begin{description}
 \item[\keyindex{zhu} :]half note with stem up but no spacing. It acts like
\verb|\hu| for stem building.
 \item[\keyindex{zhl} :]half note with stem down but no spacing. It acts like
\keyindex{hl} for stem building.
 \item[\keyindex{zqu} :]quarter note with stem up but no spacing. It acts like
\verb|\qu| for stem building.
 \item[\keyindex{zql} :]quarter note with stem down but no spacing. It acts
like \verb|\ql| for stem building.
 \item[\keyindex{zcu}, \keyindex{zccu}, \keyindex{zcccu}, \keyindex{zccccu}
:]eighth, ..., note with stem up but no spacing. It acts like
\verb|\cu| for stem building.
 \item[\keyindex{zcl}, \keyindex{zccl}, \keyindex{zcccl}, \keyindex{zccccl}
:]eighth, ..., note with stem down but no spacing. It acts
like \verb|\cl| for stem building.
 \item[\keyindex{zqb} :]note belonging to a beam but no spacing.
 \item[\keyindex{rhu}, \keyindex{rhl}, \keyindex{rqu}, \keyindex{rql},
  \keyindex{rcu}, \keyindex{rcl} :] \verb|\rhu| acts like \verb|\zhu|,
  but the note is shifted one note width on the right, other analogous.
 \item[\keyindex{lhu}, \keyindex{lhl}, \keyindex{lqu}, \keyindex{lql},
  \keyindex{lcu}, \keyindex{lcl} :]same
  as above, but the whole of the note is shifted one note width on the left.
 \item[\keyindex{zw}~$p$ :]whole note at pitch $p$ with no spacing after.
 \item[\keyindex{zwq}~$p$ :]arbitrary duration note
  (\hbox to8pt{\zwq1\hss}) at pitch $p$ with no spacing after.
 \item[\keyindex{zbreve}~$p$ :]breve note
  (\hbox to8pt{\zbreve1\hss}) at pitch $p$ with no spacing after.
 \item[\keyindex{zlonga}~$p$ :]longa note
  (\hbox to8pt{\zlonga1\hss}) at pitch $p$ with no spacing after.
 \item[\keyindex{zmaxima}~$p$ :]maxima note
  (\hbox to16pt{\zmaxima1\hss}) at pitch $p$ with no spacing after.
\end{description}\end{quote}
 %\check


\subsection{Single (spacing) stemless notes}

 Although not standard in real music scores, one may need to have stemless
quarter and half note heads posted in the same way as whole notes. This can be
done with the following commands:

\begin{quote}\begin{description}
\item[\keyindex{nh}~$p$ :]half note head at pitch $p$.
\item[\keyindex{nq}~$p$ :]quarter note head at pitch $p$.
\end{description}\end{quote}

\medskip As an example, the sequence:

\begin{music}
 \startextract
\notes\nq c\nq j\enotes\barre
\Notes\nh c\nh j\enotes\barre
\notes\nq {cdef}\enotes
\endextract
\end{music}

\medskip \noindent was coded as:

%\check
\begin{quote}\begin{verbatim}
\notes\nq c\nq j\enotes\barre
\Notes\nh c\nh j\enotes\barre
\notes\nq {cdef}\enotes
\end{verbatim}\end{quote}

 In case of special need, non spacing variants have been provided, namely
\keyindex{znh} and \keyindex{znq}.


 \subsection{Pointed notes}
One simple way of doing consists in putting \keyindex{pt
$p$} to get a \ital{dot} after the normal note head at pitch $p$. Thus a
quarter note with one point can be coded \verb|\pt h\qu h|, with two points
as \keyindex{ppt}\verb|\qu h| and with three points as
\keyindex{pppt}\verb|\qu h|.

 A simpler way of doing consists in using compact macros, namely:
\keyindex{whp}, \keyindex{whpp},
\keyindex{zwp}, \keyindex{zwpp},
\keyindex{hup}, \keyindex{hupp},
\keyindex{hlp}, \keyindex{hlpp},
\keyindex{zhp}, \keyindex{zhpp},
\keyindex{qup}, \keyindex{qupp},
\keyindex{qlp}, \keyindex{qlpp},
\keyindex{zqp}, \keyindex{zqpp},
\keyindex{cup}, \keyindex{cupp},
\keyindex{clp}, \keyindex{clpp},
\keyindex{qbp} and \keyindex{qbpp}.
Where all \verb|\z...p| are useful in chords.

 You may also introduce pointed notes, especially in groups by coding
a \ital{period} before (not after) the letter representing the pitch:
\verb|\qu{.a.^b.c}| which is equivalent to:
\begin{quote}\begin{verbatim}
\pt{a}\qu{a}\pt{b}\sh{b}\qu{b}\pt{c}\qu{c}
\end{verbatim}\end{quote}
Finally, pointed notes can also be produced without spacing after, using
\keyindex{zhup}, \keyindex{zhlp}, \keyindex{zqup}, \keyindex{zqlp},
\keyindex{zcup}, \keyindex{zclp}, \keyindex{zqbp},
and the same with two \verb|p|'s for
double-pointed notes, like \keyindex{zhupp}, \keyindex{zhlpp},
\keyindex{zqupp}, \keyindex{zqlpp},
\keyindex{zcupp}, \keyindex{zclpp} and \keyindex{zqbpp}.

If two voices share one staff, the points of the lower voice are lowered,
if the note is on a note line. Therefore you can use \keyindex{lpt}~$p$ and
\keyindex{lppt}~$p$.

 %\check
\section{Beams}

 Beams are not automatically handled, but they must be declared explicitely,
\ital{before} the first spacing note involving them is coded. Two kinds of
macros are provided:

\begin{enumerate}

 \item fixed slope beams have an arbitrary slope chosen by the user in
the range -45\% to +45\% (by multiples of 5\%);

 \item semi-automatic beams have their slope computed knowing the number
of \keyindex{noteskip} over which they are supposed to extend, and knowing the
initial and final pitch of the notes they are supposed to link.
\end{enumerate}
 %\check
 \subsection{Fixed slope beams}
 \subsubsection{Beam initiation}
\begin{quote}\begin{description}
 \item[\keyindex{ibu}~$nps$ :]initiates an \ital{upper beam} 3 horizontal
line spacings above the pitch $p$~; $m$ is its reference number, which must be
in the range [0-5] ([0-8] if \verb|musixadd| file has been \verb|\input|);
$s$ is the slope of the beam.
\end{description}\end{quote}
 $s$ is an integer in the range [-9,9].
$s=1$ means a slope of 5\%, $s=9$ means a slope of 45\%,
$s=-3$ means a slope of -15\%, etc.
With usual spacings a slope of 2 or 3 is fit for ascending scales. A slope of
6 to 9 is fit for ascending arpeggios.

\begin{quote}\begin{description}

 \item[\keyindex{ibl}~$nps$ :]initiates a \ital{lower beam} 3 horizontal line
spacings below the pitch $p$. Other parameters as above.

 \item[\keyindex{ibbu}~$nps$ :]initiates a \ital{double upper beam} (same
parameter meaning).
 \item[\keyindex{ibbl}~$nps$ :]initiates a \ital{double lower beam} (same
parameter meaning).
 \item[\keyindex{ibbbu}~$nps$ :]initiates a \ital{triple upper beam} (same
parameter meaning).
 \item[\keyindex{ibbbl}~$nps$ :]initiates a \ital{triple lower beam} (same
parameter meaning).
 \item[\keyindex{ibbbbu}~$nps$ :]initiates a \ital{quadruple upper beam} (same
parameter meaning).
 \item[\keyindex{ibbbbl}~$nps$ :]initiates a \ital{quadruple lower beam} (same
parameter meaning).
\end{description}\end{quote}

Notes belonging to beams are coded in the form \keyindex{qb}~$np$ where $n$ is
the beam number and $p$ the pitch of the note head. \musixtex\ adjusts the
length of the note stem to link the bottom of the chord to a beam.

 \subsubsection{Beam termination}
 Beam termination is also not automatic. The termination of a given
beam must be explicitely declared \ital{before} coding the last spacing note
connected to that beam.
\begin{quote}\begin{description}
 \item[\keyindex{tbu}~$n$ :]terminates upper beam number $n$ at current
position. \item[\keyindex{tbl}~$n$ :]terminates lower beam number $n$ at
current position.
\end{description}\end{quote}
\keyindex{tbu} and \keyindex{tbl} terminate beams of any
multiplicity. Therefore 32-th notes hanging on a triple beam are initiated by
\keyindex{ibbbu}~$nps$ and terminated by \keyindex{tbu}~$n$.

 Since beams usualy finish with a \verb|\qb| to link the last note, shorter
macros have been provided:

 \begin{itemize}

 \item \keyindex{tqb} $np$ is equivalent to \verb|\tbl| $n$\verb|\qb| $np$

 \item \keyindex{tqh} $np$ is equivalent to \verb|\tbu| $n$\verb|\qb| $np$

 \item \keyindex{ztqb} $np$ is equivalent to \verb|\tbl| $n$\verb|\zqb| $np$
(no spacing after)

 \item \keyindex{ztqh} $np$ is equivalent to \verb|\tbu| $n$\verb|\zqb| $np$
(no spacing after)

 \end{itemize}

 \subsubsection{Beams of increasing multiplicity}
 It is also possible to code beams whose multiplicity is not the same
at the beginning. The multiplicity can be increased at any position. For
instance, \keyindex{nbbu}~$n$ which sets the multiplicity of upper beam
number $n$ to 2 starting at the current position, \keyindex{nbbbu}~$n$ sets
its multiplicity to 3 and \keyindex{nbbbbu}~$n$ sets its multiplicity to 4.
\keyindex{nbbl}~$n$ \dots
\keyindex{nbbbbl}~$n$ perform the same functions for lower beams.


 Note that the difference between upper and lower beams does not
mainly consist in the beam being above or below the note heads; rather, it
specifies whether the abscissa of the beginning and the end of this beam is
aligned on the right (upper beam) or on the left (lower) beam. Thus, the
sequence:

\begin{music}
\startextract
\Notes\ibu0h0\qb0e\nbbu0\qb0e\nbbbu0\qb0e\nbbbbu0\qb0e\tbu0\qb0e\enotes
\endextract
\end{music}
\noindent has been coded as
\begin{quote}\begin{verbatim}
\Notes\ibu0h0\qb0e\nbbu0\qb0e\nbbbu0\qb0e\nbbbbu0\qb0e\tbu0\qb0e\enotes
\end{verbatim}\end{quote}

 It is quite possible to terminate with \keyindex{tbu} a beam initiated
with \keyindex{ibl}. This may give:

\begin{music}
\startextract
\Notes\ibl0p0\qb0p\nbbl0\qb0p\nbbbl0\qb0p\tbu0\qb0e\enotes
\endextract
\end{music}
\noindent which has been coded as
\begin{quote}\begin{verbatim}
\Notes\ibl0p0\qb0p\nbbl0\qb0p\nbbbl0\qb0p\tbu0\qb0e\enotes
\end{verbatim}\end{quote}
 \subsubsection{Beams of decreasing multiplicity}
 Partial termination of beams is also possible, by using \keyindex{tbbu}
or \keyindex{tbbl}~: these macros terminate the current beam except that of
order 1 (eighths). \keyindex{tbbbu} or \keyindex{tbbbl} terminate the current
beam except those of order 1 and 2, etc.

\begin{music}
\startextract
\Notes\ibbbu0h0\qb0e\tbbbu0\qb0e\tbbu0\qb0e\tbu0\qb0e\enotes
\endextract
\end{music}
\noindent has been coded as

\begin{quote}\begin{verbatim}
\startextract
\Notes\ibbbu0h0\qb0e\tbbbu0\qb0e\tbbu0\qb0e\tbu0\qb0e\enotes
\endextract
\end{verbatim}\end{quote}

The macros \keyindex{tbbu} and \keyindex{tbbl} and higher order
may also be invoked when only
a single beam is active. Then, a second beam or third or ...
(upper or lower according
the initiating procedure) is opened \ital{one note width before
the current position, and closed immediately}. Thus the following sequences

\begin{music}
\let\extractline\hbox
\hbox to \hsize{%
\hss
  \startextract
  \Notes\ibu0e0\qbp0e\tbbu0\tbu0\qb0e\en
  \endextract
\hss\hss
  \startextract
  \Notes\ibu0e0\qbpp0e\tbbbu0\tbbu0\tbu0\qb0e\en
  \endextract
\hss}
\end{music}
\noindent are coded:
\hspace*{\fill}\begin{minipage}{.4\textwidth}\begin{verbatim}
\Notes\ibu0e0\qbp0e%
  \tbbu0\tbu0\qb0e\en
\end{verbatim}\end{minipage}\hfill
\begin{minipage}{.4\textwidth}\begin{verbatim}
\Notes\ibu0e0\qbpp0e%
  \tbbbu0\tbbu0\tbu0\qb0e\en
\end{verbatim}\end{minipage}\hfill

\noindent The same behaviour occurs in the case of \keyindex{tbbbu},
\keyindex{tbbbl}, \keyindex{tbbbbu} and \keyindex{tbbbbl}.
 The symmetrical pattern is also possible. For example:

\begin{music}
\startextract
\Notes\ibbl0j0\roff{\tbbl0}\qb0j\tbl0\qbp0j\enotes
\endextract
\end{music}
\noindent has been coded as:
\begin{quote}\begin{verbatim}
\Notes\ibbl0j0\roff{\tbbl0}\qb0j\tbl0\qbp0j\enotes
\end{verbatim}\end{quote}
 \begin{remark} these codings may seem complicated. In fact,
it is the responsibility of the user to define macros which perform the most
common sequences in his masterpiece. For example, one could define sets of
four sixteenths by the macro:

\verb|\def\qqh#1#2#3#4#5{\ibbl0#2#1\qb#2\qb#3\qb#4\tbl0\qb#5}|

\noindent where the first argument is the slope and the other four
arguments are the pitches of the four consecutive sixteenths wanted.
\end{remark}


\noindent A slightly more complicated example is:

\begin{music}
\startextract
\notes\ibbbu0e0\roff{\tbbbu0}\qb0f\en
\notesp\tbbu0\qbp0f\en
\Notes\tbu0\qb0f\en
\notesp\ibbu0f0\roff{\tbbu0}\qbp0f\en
\Notes\qb0f\en
\notes\tbbbu0\tbbu0\tbu0\qb0f\en
\endextract
\end{music}
\noindent has been coded as:
\begin{quote}\begin{verbatim}
\notes\ibbbu0e0\roff{\tbbbu0}\qb0f\en
\notesp\tbbu0\qbp0f\en
\Notes\tbu0\qb0f\en
\notesp\ibbu0f0\roff{\tbbu0}\qbp0f\en
\Notes\qb0f\en
\notes\tbbbu0\tbbu0\tbu0\qb0f\en
\end{verbatim}\end{quote}
 %\check
 \subsection{Repeated pattern beams}\index{repeated patterns}
Note heads hanging on beams are not necessarily quarter (or higher order)
note heads. It is possible to hang half note heads on beams
using \keyindex{hb} macro, e.g.:

\begin{music}
\startextract
\Notes\ibbl0j0\hb0j\tbl0\hb0j\enotes
\Notes\ibbu0g0\hb0g\tbu0\hb0g\enotes
\endextract
\end{music}
\noindent has been coded as:
\begin{quote}\begin{verbatim}
\Notes\ibbl0j0\hb0j\tbl0\hb0j\enotes
\Notes\ibbu0g0\hb0g\tbu0\hb0g\enotes
\end{verbatim}\end{quote}


It is also possible to write

\begin{music}
\startextract
\Notes\ibbl0j3\wh j\tbl0\wh l\enotes
\Notes\ibbu0g3\wh g\tbu0\wh i\enotes
\endextract
\end{music}
\noindent which was coded as:
\begin{quote}\begin{verbatim}
\Notes\ibbl0j3\wh j\tbl0\wh l\enotes
\Notes\ibbu0g3\wh g\tbu0\wh i\enotes
\end{verbatim}\end{quote}
\noindent However, a better look could be obtained in a more sophisticated
way\footnote{You are suggested to make your own macro if you have to type many
of these, or better: use a pre-compiler.}:

\begin{music}
\startextract
\Notes\loff{\zw j}\ibbl0j3\sk\tbl0\wh l\enotes
\Notes\ibbu0g3\wh g\tbu0\roff{\wh i}\enotes\qspace
\endextract
\end{music}
\noindent which was simply coded as:
\begin{quote}\begin{verbatim}
\Notes\loff{\zw j}\ibbl0j3\sk\tbl0\wh l\enotes
\Notes\ibbu0g3\wh g\tbu0\roff{\wh i}\enotes\qspace
\end{verbatim}\end{quote}

 Single repeated notes can also be made --- in a much more sophisticated
way\footnote{But you can write your own macro, thinking of using
{\tt\char92transpose} to lift the oblique beams.}, for example:

 \begin{music}
\startextract
\Notes\ibl0h0\qb0{hhh}\tbl0\qb0h\bsk\bsk\bsk\bsk
      \ibu0j0\qb0{jjj}\tbu0\qb0j\en
\NOTes\loffset{0.5}{\ibl0j9}\roffset{0.5}{\tbl0}\zhl h%
      \loffset{0.5}{\ibu0g9}\roffset{0.5}{\tbu0}\hu j\en\bar
\notes\ibbl0i0\qb0{hhh}\tbl0\qb0h\bsk\bsk\bsk\bsk
      \ibbu0i0\qb0{jjj}\tbu0\qb0j%
      \ibbl0i0\qb0{hhh}\tbl0\qb0h\bsk\bsk\bsk\bsk
      \ibbu0i0\qb0{jjj}\tbu0\qb0j\en
\NOTes\loffset{0.5}{\ibbl0k9}\roffset{0.5}{\tbl0}\zhl h%
      \loffset{0.5}{\ibbu0f9}\roffset{0.5}{\tbu0}\hu j\en
\endextract
 \end{music}
 \noindent whose coding (due to W. {\sc Icking}) is;

\begin{quote}\begin{verbatim}
\Notes\ibl0h0\qb0{hhh}\tbl0\qb0h\bsk\bsk\bsk\bsk
      \ibu0j0\qb0{jjj}\tbu0\qb0j\en
\NOTes\loffset{0.5}{\ibl0j9}\roffset{0.5}{\tbl0}\zhl h%
      \loffset{0.5}{\ibu0g9}\roffset{0.5}{\tbu0}\hu j\en\bar
\notes\ibbl0i0\qb0{hhh}\tbl0\qb0h\bsk\bsk\bsk\bsk
      \ibbu0i0\qb0{jjj}\tbu0\qb0j%
      \ibbl0i0\qb0{hhh}\tbl0\qb0h\bsk\bsk\bsk\bsk
      \ibbu0i0\qb0{jjj}\tbu0\qb0j\en
\NOTes\loffset{0.5}{\ibbl0k9}\roffset{0.5}{\tbl0}\zhl h%
      \loffset{0.5}{\ibbu0f9}\roffset{0.5}{\tbu0}\hu j\en
\end{verbatim}\end{quote}

 \subsection{Beams across bars}
The usual way most composers wrote their scores was beams inside bars,
at least until the beginning of the XIX-th
century. Unfortunately, later composers ({\sc Brahms}, {\sc Scriabin},
{\sc Grieg}, etc.) wanted to write beams jumping across bars.
This is possible without any problems.
We give an example from {\sc Brahms}'s Intermezzo op.~118,1 provided by
Miguel {\sc Filgueiras}:\index{Brahms, J.@{\sc Brahms, J.}}\medskip

\begin{music}
\interstaff{12}
\setstaffs1{2}
\setclef1\bass
\generalmeter\allabreve
\startextract
\NOtes\qp\nextstaff\isluru0q\zq{q}\ql{j}\enotes
\bar
\nspace
\Notes\ibu0L2\qb0{CEJLcL}%
  \nextstaff\roff{\zw{l}}\pt{p}\zh{_p}\pt{i}\hl{_i}\enotes
\Notes\qb0J\itied1a\qb0a\nextstaff\tslur0o\zq{o}\ql{h}\enotes
\bar
\Notes\ttie1\zh{.L.a}\hl{.e}%
  \nextstaff\qb0{chj}\tbl0\qb0l\cl{q}\ds\enotes
\NOtes\qp\nextstaff\zq{q}\ql{j}\enotes
\endextract
\end{music}
 %\check
\noindent whose coding is:
\begin{verbatim}
\interstaff{13}
\instrumentnumber{1}
\setstaffs1{2}
\setclef1\bass
\generalmeter\allabreve
\startextract
\NOtes\qp\nextstaff\isluru0q\zq{q}\ql{j}\enotes
\bar
\nspace
\Notes\ibu0a1\qb0{CEJLcL}%
  \nextstaff\roff{\zw{l}}\pt{p}\zh{_p}\pt{i}\hl{_i}\enotes
\Notes\qb0J\itied1a\qb0a\nextstaff\tslur0o\zq{o}\ql{h}\enotes
\bar
\Notes\ttie1\zh{.L.a}\hl{.e}%
  \nextstaff\qb0{chj}\tbl0\qb0l\cl{q}\ds\enotes
\NOtes\qp\nextstaff\zq{q}\ql{j}\enotes
\endextract
\end{verbatim}
Still to be done manually is the cut and prolongation across line breaks, which
can be easily be done with shifting using \keyindex{roff} and/or
\keyindex{loff}, or with insert of a spacing command (here done with
\keyindex{hsk}). We give an example from {\sc Grieg}'s ``Hochzeit auf
Troldhaugen'':\index{Grieg, E.@{\sc Grieg, E.}}\medskip

\begin{music}
\parindent0pt
\def\rqs{\lower\Interligne\rlap\qs}
\def\snotes{\vnotes1\elemskip}
\setstaffs1{2}
\generalsignature{2}
\setclef1{\bass}
\interstaff{12}
\startpiece
%%% bar 1
\addspace\afterruleskip
\snotes|\tinynotesize\ibsluru0n\ibbu0m5\qb0{=m}\tqh0n\en
\qspace
\Notes\zchar{-7}\sPed\loffset{.3}{\fl E}\zq E\qu{_I}%
  |\zql g\ibu2l0\busf2\qb2{=m}\en
\Notes|\tubslur0o\qb2{_l}\en
\Notes\loffset{.3}{\fl L}\zq L\ibl0L0\qb0{_b}%
  |\ibl1h0\zqb1g\bupz2\qb2l\en
\Notes\zq L\tqb0b|\tbl1\zqb1g\bupz2\tqh2l\en
\NOtes\zq L\ql b|\zql g\qu l\en
\notes\zchar{-7}\sPed\zchar{-7}{\eightit ~~~sempre}%
  \zchar{14}{\pp\eightit~sempre}\zq I\ibbu1J0\qb1L|\qs\en
\notes\qs|\zq N\ibbu3d0\qb3{_d}\en
\notes\qb1E|\rqs\en
\notes\qs|\fl e\zq N\rq e\qb3d\en
%%% bar 2
\bar
\notes\loffset{.3}{\fl I}\zq I\qb1{_L}|\rqs\en
\qspace
\notes\qs|\lfl d\zq d\zq {=f}\qb3N\en
\notes\tqh1{_E}|\rqs\en
\notes\qs|\zq d\zq g\tqh3N\en
\notes\zq I\ibbu0J0\qb0L|\rqs\en
\notes\qs|\zq d\ibbu1d0\qb1N\en
\notes\qb0E|\rqs\en
\notes\qs|\fl e\rq e\zq d\qb1N\en
\notes\zq I\qb0L|\rqs\en
\notes\qs|\zq f\zq d\qb1N\en
\notes\tqh0E|\rqs\en
\notes\qs|\zq g\zq d\tqh1N\en
\notes\zq I\ibbu0J0\qb0L|\rqs\en
\notes\qs|\zq d\ibbu1d0\qb1N\en
\notes\qb0E|\rqs\en
\notes\rlap\qs\hsk\tbu0|\rq e\zq d\zqb1N\hsk\tbu1\en
\endpiece
\end{music}
\noindent where the prolongation was coded as:
\begin{verbatim}
\notes\rlap{\qs}\hsk\tbu0|\rq e\zq d\zqb1N\hsk\tbu1\en
\end{verbatim}
 %\check
 \subsection{Semi-automatic beams}
In order to avoid tedious checks to adjust the slope (and even the starting
pitch) of beams in music with a lot of steep beams, a set of automatically
slope computing has recently been implemented. If
you say \verb|\Ibu2gj3| \musixtex\ will understand that`you want to
build an upper beam (beam number 2) horizontally extending \verb|3\noteskip|,
the first note of which is a \verb|g| and the last note is a \verb|j|.
Knowing these parameters it will choose the highest slope number which
corresponds to a slope not more than $(\hbox{\tt j}-\hbox{\tt
g})/(3\keyindex{noteskip})$. Moreover, if there is no sufficiently steep beam
slope available, then it will raise the starting point.

 Eight such macros are available: \keyindex{Ibu}, \keyindex{Ibbu},
\keyindex{Ibbbu}, \keyindex{Ibbbbu}, \keyindex{Ibl}, \keyindex{Ibbl},
\keyindex{Ibbbl} and \keyindex{Ibbbbl}.

Also available are ready definitions for often needed sets of double,
triple and quadruple notes with computed slopes. These are:
\keyindex{Dqbu}, \keyindex{Dqbl}, \keyindex{Dqbbu}, \keyindex{Dqbbl},
\keyindex{Tqbu}, \keyindex{Tqbl}, \keyindex{Tqbbu}, \keyindex{Tqbbl},
\keyindex{Qqbu}, \keyindex{Qqbl}, \keyindex{Qqbbu} and \keyindex{Qqbbl}.
  %\check


\medskip
\begin{music}
\parindent0pt\startpiece
\Notes\Dqbu gh\Dqbl jh\en
\notes\Dqbbu fg\Dqbbl hk\en\bar
\Notes\Tqbu ghi\Tqbl mmj\en
\notes\Tqbbu fgj\Tqbbl njh\en\bar
\Notes\Qqbu ghjh\Qqbl jifh\en
\notes\Qqbbu fgge\Qqbbl jhgi\en\endpiece
\end{music}
\noindent which was simply coded as:
\begin{quote}\begin{verbatim}
\Notes\Dqbu gh\Dqbl jh\en
\notes\Dqbbu fg\Dqbbl hk\en\bar
\Notes\Tqbu ghi\Tqbl mmj\en
\notes\Tqbbu fgj\Tqbbl njh\en\bar
\Notes\Qqbu ghjh\Qqbl jifh\en
\notes\Qqbbu fgge\Qqbbl jhgi\en
\end{verbatim}\end{quote}
 %\check

\section{Rests}
 Except that difference that they have no specific pitch, rests are coded in a
very simple way.
 \subsection{Ordinary rests}
 Full bar rests (also called ``pauses'') are coded as
\keyindex{pause}, with a point behind as \keyindex{pausep};
smaller rests are
\keyindex{hpause} (of duration equal to a \ital{half note}),
with a point behind as \keyindex{hpausep},
\keyindex{qp} (duration equal to a \ital{quarter note},
  also \keyindex{soupir}),
\keyindex{ds} (duration equal to an \ital{eighth note}),
\keyindex{qs} (duration equal to an \ital{sixteenth note}),
\keyindex{hs} (duration equal to an \ital{thirty second note}),
\keyindex{qqs} (duration equal to an \ital{sixty fourth note}).

 Long rests (lasting several bars) can be coded as \keyindex{PAuse}
and \keyindex{PAUSe}, which respectively yield:

\begin{music}
\generalmeter{\meterfrac44}
\startextract
\def\atnextbar{\znotes\centerbar\PAuse\en}%
\NOTEs\en\bar
\def\atnextbar{\znotes\centerbar\PAUSe\en}%
\NOTEs\en\endextract
\end{music}
 %\check

 \subsection{Lifted rests}
All the previous rests with exception of \keyindex{pause} and
\keyindex{hpause} are \ital{hboxes}; this means that they
can be vertically offset to meet polyphonic music requirements using the
standard \TeX\ command \keyindex{raise}.

 In addition, two symbols have been provided to put a \itxem{full rest} or a
\itxem{half rest} above or below the staff. Then the ordinary \verb|\pause| or
\verb|\hpause| cannot be used since there is a need for small horizontal line
to distinguish between the full and the half rest. They are:
 \begin{itemize}
 \item \keyindex{liftpause}~$n$ (non spacing) to get a
  \hbox to10pt{\liftpause{-2}\hss}
  raised from original position by $n$ staff line intervals,
 \item \keyindex{lifthpause}~$n$ (non spacing) to get
  \hbox to10pt{\lifthpause{-1}\hss} raised the same way.
 \end{itemize}
 %\check

 \subsection{Bar centered rests}\label{barcentered}
Sometimes it is necessary to place a rest (or other) exactly in the middle
of a bar. This can be done with more sophisticated commands:
%\keyindex{atnextbar}
\keyindex{centerbar},
\keyindex{centerPAUSe},
\keyindex{centerPAuse},
\keyindex{centerpause},
\keyindex{centerhpause}.
For example:

\begin{music}
\generalmeter\meterC
\setclef1\bass
\setstaffs1{2}
\parindent0pt
\startpiece\addspace\afterruleskip
\NOtes|\qa{cegj}\en
\def\atnextbar{\znotes\centerpause\en}\bar
\NOtes|\qa{jgec}\en
\def\atnextbar{\znotes\centerpause\en}\bar
\Notes\ca{`jihgfedc}\en
\def\atnextbar{\znotes|\centerpause\en}\bar
\NOTes\ha{Nc}\en
\def\atnextbar{\znotes|\centerpause\en}\bar
\addspace{10\elemskip}%
\def\atnextbar{\znotes\centerbar\duevolte|\centerbar\duevolte\en}\endpiece
\end{music}
\begin{verbatim}
\generalmeter\meterC
\setclef1\bass
\setstaffs1{2}
\parindent0pt
\startpiece\addspace\afterruleskip
\NOtes|\qa{cegj}\en
\def\atnextbar{\znotes\centerpause\en}\bar
\NOtes|\qa{jgec}\en
\def\atnextbar{\znotes\centerpause\en}\bar
\Notes\ca{`jihgfedc}\en
\def\atnextbar{\znotes|\centerpause\en}\bar
\NOTes\ha{Nc}\en
\def\atnextbar{\znotes|\centerpause\en}\bar
\addspace{10\elemskip}%
\def\atnextbar{\znotes\centerbar{\duevolte}|\centerbar{\duevolte}\en}\endpiece
\end{verbatim}
 %\check

\section{Phantom notes and spacing commands}\label{spacing}
It may be interesting, when coding a sequence of notes within a unique pair
\verb|\notes...\enotes|, to skip one note place in order -- for
example -- to set the third note of one staff at the same abscissa as that of
the second note of another staff. This can be done by inserting \keyindex{sk}
which causes a spacing of one \keyindex{noteskip}\footnote{Never use
\keyindex{kern} nor \keyindex{hskip}~: in fact \keyindex{sk} not only causes
a space but also records that space for correct handling of beams, slurs,
trills, octaviation dashed lines, line-breaking, etc.}. Sometimes it is useful
to \ital{skip back} one noteskip, this can be done with \keyindex{bsk}. The
spacing of a half \verb|\noteskip| can be yielded with \keyindex{hsk}.

 %\check

 If you just want to shift a note or a symbol by one note head width,
you may write \keyindex{roff}\verb|{|\ital{note/symbol}\verb|}| (shift right)
or \keyindex{loff}\verb|{|\ital{note/symbol}\verb|}| (shift left).
 If you just want to shift a note or a symbol by one half note head width,
you may write \keyindex{hroff}\verb|{|\ital{note/symbol}\verb|}| (shift right)
or \keyindex{hloff}\verb|{|\ital{note/symbol}\verb|}| (shift left).
For example, to get
 %\check


\begin{music}
\startextract
\Notes\roff{\zwh g}\qu g\qu h\qu i\enotes
\endextract
\end{music}
you code:

 %\check

\begin{quote}\begin{verbatim}
\Notes\roff{\zwh g}\qu g\qu h\qu i\enotes
\end{verbatim}\end{quote}

If you want to shift notes or symbols by more or less than one note head
width, then you can use \keyindex{roffset} which has an additional first
argument which is the number of note head widths the second argument should be
shifted by. For example

\begin{music}
\startextract
\Notes\roffset{1.5}{\zwh g}\qu g\qu h\qu i\enotes
\endextract
\end{music}
was coded:

\begin{quote}\begin{verbatim}
\Notes\roffset{1.5}{\zwh g}\qu g\qu h\qu i\enotes
\end{verbatim}\end{quote}

\begin{important} the offset specified or implicitly specified in
\verb|\roff|, \verb|\loff|, \verb|\roffset| and \verb|loffset| does not add to
the total spacing amount; in other words this is just an offset, not a
spacing. Conversely, the possible spacing of commands included in the argument
of \verb|\roff|/\verb|\loff| and in the second argument
of \verb|\roffset|/\verb|\loffset| actually adds to the total spacing in that
bar of the current staff. Therefore, the symbol/note argument of these offset
commands should usually produce no spacing, i.e. begin with \verb|\z|.

 Besides, it is not advised to insert several consecutive spacing notes in
the \verb|\roff|/\verb|\loff| or \verb|\roffset|/\verb|\loffset| arguments,
since it could mess up the global spacing accounting.
 \end{important}

 %\check


To insert spacing of \ital{nearly} one \ital{note head width}, you can use
\keyindex{qsk}(which has the drawback, that it is scalable, so what spacing
you really get depends on the computed \verb|\elemskip| from \verb|musixflx|
and the user chosen value of \verb|\elemskip|). The half of this spacing can
be forced with \keyindex{hqsk}. Note that these two latter macros must be used
inside a pair \verb|\notes...\enotes|.

 If you want to insert additional spacing before a group of notes, especially
to avoid a collision with an accidental, you can write \keyindex{nspace} ---
outside the \verb|\notes...\enotes| group --- and this will produces an
additional spacing of a half note head width; in the same way,
\keyindex{qspace} will yield a spacing of a note head width. Note that
\verb|\nspace| and \verb|\qspace| are ``hard'' spacings, whose general
feature is \verb|\hardspace|, described below.

Sometimes the additional space behind \keyindex{changecontext}
disturbs the eye of a typesetter, but this ugly spacing can be reduced with:

\keyindex{addspace}\verb|{-|\keyindex{afterruleskip}\verb|}%|

It should be emphasized that all these spacing commands work correctly, only
when their dimension arguments are \itxem{scalable values} and not fixed
dimensions; the scalable dimensions are \keyindex{elemskip},
\keyindex{beforeruleskip}, \keyindex{afterruleskip}, \keyindex{noteskip} and
their multiples.

The only spacing command which can work with ``normal'' (that is,
\ital{not scalable}) dimensions is:\label{hardspace}\index{hard spacing}


\keyindex{hardspace}\verb|{|\ital{any \TeX~dimension}\verb|}%|

\noindent but both \verb|\addspace| and \verb|\hardspace| can only be used
outside of \verb|\notes...\enotes|.

Conversely, a more general spacing is allowed within the
\verb|\notes...\enotes| pairs, namely:

\keyindex{off}\verb|{|$D$\verb|}%|

\noindent where $D$ is a \itxem{scalable dimension}, for example
\verb|\noteskip| or \verb|\elemskip|. In fact, if you look to the
\musixtex\ source, you will find that \verb|\off| is the basic control
sequence used to define \keyindex{sk}, \keyindex{qsk}, etc.

 %\check

\section{Collective coding: sequences of notes}

As seen in the {\sc Mozart} example, it is not necessary to write a macro
sequence \verb|\notes...\enotes| for each column\footnote{Although
the compiler compiles it faster.}. If, on all
staffs of all instruments, spacings are equal or multiple of a unique value,
the notes may be concatenated in each staff: each note in each staff makes
the current position horizontally advance by the elementary spacing specified
by the choice of \verb|\notes|, \verb|\Notes|, \verb|\NOtes|, etc.

 The major interest of this feature resides in that fact that
the note macros are able to write several items; for instance
\verb|\qu{cdefghij}| writes the \ital{C-major} scale in quarters with
stem up. In the same way \verb|\cl{abcdef^gh}| writes the
\ital{A-minor} scale in eighths. Not all note generating macros can be
used to perform collective coding, but most of them can.

 If necessary a void space\footnote{same behaviour as {\Bslash sk}}
can be inserted in a collective coding by using \verb|*|\index{*}.

 %\check

\section{Accidentals}

Accidentals can be introduced in two ways.

 The first way, the \ital{manual} way of coding them, consists for
example in coding \keyindex{fl}\verb|a| to put a \ital{flat} at the
pitch $a$, supposedly before the further note of that pitch.
There is no control upon the fact that a note will be put at this position
and at this pitch.
Naturals, sharps, double flats and double sharps are coded \keyindex{na}~$p$,
\keyindex{sh}~$p$, \keyindex{dfl}~$p$ and \keyindex{dsh}~$p$ respectively.

Alternate procedures \keyindex{lfl}, \keyindex{lna}, \keyindex{lsh},
\keyindex{ldfl} and \keyindex{ldsh}
place the same accidentals, but their abscissa is shifted one note head width
on the left. The purpose of this is to avoid collision of accidentals
in a chord with narrow intervals.

 The second way of coding accidentals consists in putting the symbol
\verb|^| (sharp), the symbol \verb|_| (flat), the symbol \verb|=| (natural), the
symbol \verb|>| (double sharp), or the symbol \verb|<| (double
flat) within the coding of the note, e.g.: \verb|\qb{^g}| yields a
$G\sharp$. This may very well be combined with collective coding, e.g.:
\verb|\qu{ac^d}|.

 Two sizes are available for accidentals. They revert to the small
version when notes are supposed to be too close to each other. These two
sizes can be forces by coding \keyindex{bigfl}, \keyindex{bigsh}, etc., or
\keyindex{smallfl}, \keyindex{smallsh}, etc. If one does not want to have any
small accidentals, then one can declare \keyindex{bigaccid} (conversely
\keyindex{smallaccid} or \keyindex{varaccid} -- the latter restoring variable
sizes).

 Small accidentals can also be put \ital{above} the note
heads. This is done using \keyindex{uppersh}~$p$, \keyindex{upperna}~$p$ or
\keyindex{upperfl}~$p$:

\begin{music}
\startextract
\NOtes\uppersh l\qa l\enotes
\NOtes\upperna m\qa m\enotes
\NOtes\upperfl l\qa l\enotes
\endextract
\end{music}
 It also possible to introduce \ital{\ixem{cautionary accidental}s} on a
score, i.e.\ small size accidentals between parentheses. This done by preceding
the name of the accidental keyword by a \verb|c|,\label{cautionary}
 e.g.~by coding \keyindex{cfl}~$p$ to get a cautionary flat.
 Available cautionary accidentals are \keyindex{csh}, \keyindex{cfl}, \keyindex{cna},
\keyindex{cdfl} and \keyindex{cdsh}, which give:

\begin{music}
\startextract
\NOtes\csh g\qa g\enotes
\NOtes\cfl h\qa h\enotes
\NOtes\cna i\qa i\enotes
\NOtes\cdfl j\qa j\enotes
\NOtes\cdsh k\qa k\enotes
\endextract
\end{music}
\noindent
Besides, the distance between note and accidental is influenced by

\keyindex{accshift}\verb|=|\ital{any \TeX\ dimension}

\noindent
positive values shift to left, negative to right, default is \verb|0pt|.
 \section{Transposition and octaviation}
An important feature is the existence of a special register
\keyindex{transpose} the normal value of which is 0. If you say

\verb|\transpose=3|

\noindent all subsequent pitches specified by
upper or lower case letters\footnote{Pitches specified with figures are
absolute and not transposed.} will be transposed 3 positions. If you set
\keyindex{transpose} to 7 you may write your music one octave below its final
pitch. Thus, you can define \ital{octaviation} macros like

\verb|\def\soqu#1{\zq{#1}{\transpose=7 \qu{#1}}}|

\noindent to build quarter note octaves in a single call. Note
that the octaviated note is coded within braces so that the transposition
is only local.

 \ital{Octaviation}\index{octaviation} can also be performed in another
way, namely using special codes to transpose by multiples of 7 intervals.
For example \verb|\qu{'ab}| is equivalent to \verb|\qu{hi}| and
\verb|\qu{`kl}| is equivalent to \verb|\qu{de}|. It should be
emphasized here that the \verb|'| (\itxem{acute accent}) and the \verb|`|
(\itxem{grave accent}) have cumulative effects, so that \verb|\qu{''A'A}|
is equivalent to \verb|\qu{ah}| and that the \verb|\transpose|
parameter is only reset to its initial value (not necessarily zero) when
changing staff or instrument (i.e. \| or \verb|&|) or at \verb|\enotes|.
 Since this may be confusing, it is useful to use the \verb|!| prefix
to reset the \verb|\transpose| register explicitely to the value it had
when entering \verb|\notes|\footnote{This value is saved in another
register named \keyindex{normaltranspose}.}. Thus \verb|\qu{!a'a}| always
gives the note \verb|a| and its upper octave \verb|h| \ital{shifted by the
value of {\Bslash transpose} at the beginning of the current} \noindent
\verb|\notes...\enotes| group (or \verb|\Notes...\enotes|,
etc.) whatever the number of previous grave and acute accents occurring
inbetween.
 \subsection{Typical piano octave transposition}
 \subsubsection{Local octave transposition of fixed length}
\begin{music}
\startextract
\NOTEs\octfinup{10}{3.5}\qu a\qu b\qu c\qu d\en
\endextract
\end{music}
\noindent can be coded as
\begin{quote}\begin{verbatim}
\startextract
\NOTEs\octfinup{10}{3.5}\qu a\qu b\qu c\qu d\en
\endextract
\end{verbatim}\end{quote}\zkeyindex{octfinup}
\noindent that is, the dashed line extends 3.5$\times${\Bslash noteskip}.
Conversely, lower octaviation can also be coded, for example:

\begin{music}
\startextract
\NOTEs\octfindown{-5}{2.6}\ql j\ql i\ql h\en
\endextract
\end{music}
\noindent which is coded as
\begin{quote}\begin{verbatim}
\startextract
\NOTEs\octfindown{-5}{2.6}\ql j\ql i\ql h\en
\endextract
\end{verbatim}\end{quote}\zkeyindex{octfindown}
If a more sophisticated posting is wanted, this can be achieved refefining
the macro \keyindex{octnumber}, e.g.:

\begin{music}
\startextract
\NOTEs\def\octnumber{\ppffsixteen8$^{va}$}\octfinup{10}3\qu c\qu d\qu e\en
\endextract
\end{music}
\noindent whose coding is
\begin{quote}\begin{verbatim}
\startextract
\NOTEs\def\octnumber{\ppffsixteen8$^{va}$}\octfinup{10}3\qu c\qu d\qu e\en
\endextract
\end{verbatim}\end{quote}
\noindent or

\begin{music}
\startextract
\NOTEs\def\octnumber{\ppffsixteen8$^{va\,bassa}$}\octfindown{-5}4\ql l\ql k\ql j\en
\endextract
\end{music}
\noindent coded as:
\begin{quote}\begin{verbatim}
\startextract
\NOTEs\def\octnumber{\ppffsixteen8$^{va\,bassa}$}%
  \octfindown{-5}4\ql l\ql k\ql j\en
\endextract
\end{verbatim}\end{quote}

\subsubsection{Long or variable range octave transposition}
Long range octave transpositions are better handled using
\keyindex{Ioctfinup},
\keyindex{Ioctfindown} and
\keyindex{Toctfin} whose effect extends over line breaks.

{\Bslash Ioctfinup}~$np$ starts an octave transposition of reference number
$n$ (with $0\le n<6\equiv$\keyindex{maxoctlines}) dashed line at pitch $p$
(usually $p>10$ but it can also be an alphabetic pitch specification),
{\Bslash Ioctfindown}~$np$ starts a lower octave transposition at pitch $p$
(usually $p<-2$), and both extend until terminated with {\Bslash toctfin}. The
difference between {\Bslash Ioctfinup}~$n$ and {\Bslash Ioctfindown}~$n$ is
the relative position of the ``8'' figure with respect to the dashed line, and
the sense of the terminating hook (note that {\Bslash Ioctfinup} has a hook
under the dashed line, and conversely).

For the sake of backward compatibility, \keyindex{ioctfinup} is equivalent to
\verb|\Ioctfinup 0| and \keyindex{ioctfindown} is equivalent to
\verb|\Ioctfindown 0|.
For example:

\medskip
 \begin{music}
\instrumentnumber{1}
\setstaffs12
\setclef1{6000}
%
\startextract
\notes\wh{CDEFGH}|\wh{cde}\Ioctfinup 1p\wh{fgh}\enotes
\bar
\notes\Ioctfindown 2A\wh{IJKLMN}|\wh{ijklmn}\enotes
\bar
\Notes\wh{NMLKJI}|\wh{nmlkji}\Toctfin1\enotes
\bar
\Notes\wh{HGFED}\Toctfin2\wh C|\wh{hgfedc}\enotes
\endextract
\end{music}
whose coding is
\begin{quote}\begin{verbatim}
\begin{music}
\instrumentnumber{1}
\setstaffs12
\setclef1{6000}
%
\startextract
\notes\wh{CDEFGH}|\wh{cde}\Ioctfinup 1p\wh{fgh}\enotes
\bar
\notes\Ioctfindown 2A\wh{IJKLMN}|\wh{ijklmn}\enotes
\bar
\Notes\wh{NMLKJI}|\wh{nmlkji}\Toctfin1\enotes
\bar
\Notes\wh{HGFED}\Toctfin2\wh C|\wh{hgfedc}\enotes
\endextract
\end{music}
\end{verbatim}\end{quote}
 %\check


%\begin{changebar}

 The elevation of octaviation lines may be raised/lowered using
\keyindex{Liftoctline}~$n$~$p$ where $n$ is the reference number of the
 wanted ocave line, and $n$ a number (possibly negative) number of
\verb|\internote| by which the dashed line should be lifted. This is
particularly useful when octaviation lines last several systems and need to be
lifted in the systems occuring farther than the initiation.

%\end{changebar}

 \subsection{Transposition of accidentals}
 The above processes indeed change the vertical position of the note heads
and associated symbols (note stems, accents and beams) but they do not take
care of the necessary changes of accidentals when transposing, i.e. the fact
that an $F\sharp$ occurring with a zero signature should become a $B\natural$
when transposing from the tonality of $C$ major to $F$ major where the normal
$B$ is the $B\flat$. Since the intent of the composer is not obvious -- he
may want to shift a group of notes within the same tonality or conversely to
transpose it in another tonality -- this is not done automatically. Thus the
\keyindex{sh}, \keyindex{fl}, \keyindex{na}, \keyindex{dsh} and
\keyindex{dfl} symbols \ital{are not affected} by a change of the
\keyindex{transpose} register.

 But the composer/typesetter may ask \musixtex\ to do that work. In this
case, he should code \keyindex{relativeaccid}. In that case, a \verb|\sh|
command means that the corresponding pitch\footnote{The musical output note,
not the typesetting position.} has to be raised by \ital{one half pitch}
with respect to its normal value \ital{according to the current signature}.
Thus \verb|\sh b| (using \keyindex{relativeaccid}) means a $B\sharp$ if the
signature is zero or positive, and a $B\natural$ if it is negative. The same
logic applies for all accidentals using \keyindex{relativeaccid}.

In the same way, the compact codes \verb|^|, \verb|_|, \verb|=| are normally
not affected by transposition and signatures, but their behaviour will be
changed by saying \keyindex{relativeaccid} and reset by
\keyindex{absoluteaccid} (the default situation)\footnote{Note that the
behaviour of {\Bslash sh}, {\Bslash na} and {\Bslash fl} with \musixtex\
corresponds to the behaviour of  {\Bslash Sh}, {\Bslash Na} and {\Bslash Fl}
with \musictex+{musictrp.tex}. But the {\tt musixcpt.tex} file forces the same
behaviour as \musixtex\ in that respect, see page \pageref{compatibility}.}.

 Although \ital{relative accidental coding} is an easy and safe way of
coding \ital{transposable} scores, care should be exercised in getting rid
of the habit of saying \verb|\na b| to raise the pitch of a $B$ when the
tonality is $F$ major (i.e. with \keyindex{setsign$n$}\verb|=-1| or
\keyindex{generalsignature}\verb|{-1}|). An example of sophisticated
transposition is given in the score \verb|souvenir.tex| (which \verb|\input|s
\verb|souvenix.tex|).

 %\check

\section{Slurs and ties}
The slurs and ties provided by \musixtex\ can be divided into two categories:
\begin{itemize}
   \item Those where the complete slur symbol is composed of a single
   character from one of the slur fonts, and
   \item those where the slur symbol is composed three discrete
   characters, to form the beginning, middle and end of the slur.
\end{itemize}
The former are called \ital{simple slurs} and the latter are called
\ital{compound slurs}. To some extent the division between the two is
invisible to the user, in that a number of the macros described below will
select between the two types automatically. However, other macros are
provided to
enable simple slurs to be specified. Note that slurs of both types must be
coded within the pair \verb|\notes...\enotes|.
 \subsection{General slur coding}
This section describes the usual method of slur coding, where the
choice between simple or compound slurs is made automatically.
In this case, slurs are initiated and terminated by separate macros,
as is the case for beams.
 \subsubsection{Slur initiation}
The slur must be initiated {\em before}
the spacing note at which the slur begins, and terminated {\em before} the
note at which the slur ends. The simplest slur initiation macro is


\keyindex{isluru}~$np$

\noindent which initiates an upp
er slur, with reference
number $n$, beginning at pitch $p$. The starting point of the slur is
centred above an imaginary quarter note head at pitch $p$.
As for beams, the reference number $n$ takes values from 0 to 5, or
0 to 8 if \ttxem{musixadd.tex} is included.
Similarly, \keyindex{islurd}~$np$ initiates a lower slur.
These slurs are terminated by coding
\keyindex{tslur}~$np$ where $n$ is the reference number and $p$ is the
termination pitch. To illustrate with a simple example, the following
passage

\begin{music}
\startextract
\NOtes\islurd0g\qu g\tslur0{'c}\qu c\en
\Notes\isluru0{'e}\ibl0e{-2}\qb0{edc}\tslur0b\tqb0b\en
\bar
\NOtes\islurd0{'a}\qu a\tslur0{`f}\qu f\en
\NOTes\hu g\en
\endextract
\end{music}

\noindent was coded as:
\begin{quote}\begin{verbatim}
\NOtes\islurd0g\qu g\tslur0{'c}\qu c\en
\Notes\isluru0{'e}\ibl0e{-2}\qb0{edc}\tslur0b\tqb0b\en
\bar
\NOtes\islurd0{'a}\qu a\tslur0{`f}\qu f\en
\NOTes\hu g\en
\end{verbatim}\end{quote}

Other macros are provided to change the starting and ending point of the slur
in relation to the initial and final notes. Thus, \keyindex{issluru}~$np$
initiates a ``short'' upper slur suitable for linking notes involved in chords. The
starting point is shifted to the right, and is vertically aligned with the
centre of an imaginary quarter note head at pitch $p$. If a lower short slur
is wanted, one shhould use \keyindex{isslurd}~$np$.


Sometimes, busy scores call for slurs which are vertically aligned with the
ends of note stems rather than note heads. These ``beam'' slurs --- so called
because the slur is written at usual beam height --- are provided by the
macros \keyindex{ibsluru}~$np$ and \keyindex{ibslurd}~$np$. These macros
initiate slurs raised or lowered by the current stem height to accommodate
stems or beams above or below.
 %\check

 \subsubsection{Slur termination}\label {slurtermin}
Termination of slurs can be achieved in two ways. First, macros matching
each of the initialization macros are provided, as shown below.\\
\begin{center}
  \begin{tabular}{ll}
    Initiation                             &   Termination \\
    \hline
    \keyindex{isluru},  \keyindex{islurd}  & \keyindex{tslur}  \\
    \keyindex{issluru}, \keyindex{isslurd} & \keyindex{tsslur} \\
    \keyindex{ibsluru}                     & \keyindex{tbsluru}\\
    \keyindex{ibslurd}                     & \keyindex{tbslurd}\\
    \hline
  \end{tabular} \end{center} These specific termination macros enable slurs
started in one way to be terminated in another. For example, a slur beginning
as a ``beam'' slur may be terminated as a normal slur. This would be achieved
using the macro pair \verb|\ibslur...\tslur|.
 \subsubsection{Ties} The coding of \itxem{ties} follows from the above
discussion as a special case of slurs, i.e. when there is no pitch change.
Upper ties are initiated by \keyindex{itieu}~$np$ which starts an upper tie of
reference number $n$ at pitch $p$.
Lowerr ties are initiated by \keyindex{itied}~$np$ which starts an lower tie of
reference number $n$ at pitch $p$.

The starting position of the tie is the same as \verb|\issluru| and
\verb|\isslurd| respectively. The tie is terminated by coding
\keyindex{tstie}~$n$.

Some simple examples of slurs and ties are illustrated below.

\begin{music}
\startextract
\NOTes\isluru0g\hl g\tslur0h\hl h\en
\NOTes\islurd0c\issluru1g\zh{ce}\hu g\tslur0d\tsslur1h\zh{df}\hu h\en
\NOTes\ibsluru0g\islurd1g\hu g\tubslur0h\hu h\en
\NOTes\itieu0k\hl k\ttie0\tdbslur1f\hl k\en
\endextract
\end{music}
\noindent This was coded as:
\begin{quote}\begin{verbatim}
\begin{music}
\startextract
\NOTes\isluru0g\hl g\tslur0h\hl h\en
\NOTes\islurd0c\issluru1g\zh{ce}\hu g\tslur0d\tsslur1h\zh{df}\hu h\en
\NOTes\ibsluru0g\islurd1g\hu g\tubslur0h\hu h\en
\NOTes\itieu0k\hl k\ttie0\tdbslur1f\hl k\en
\endextract
\end{music}
\end{verbatim}\end{quote}
 \subsubsection{Short ties} Usual music coding makes ties not different of
slurs, i.e. a tie is types exactly like a slur linking two notes of same pitch.
However, this traditional way of doing has two the drawback:
 \begin{itemize}
  \item in some special cases, a tie might be confused with a tie and
conversely,
  \item chord ties cannot be implemented with the slur starting above or below
the note, but only starting just right of the noetead and finishing just left
of the other note head.
 \end{itemize}
  This can be done using \verb|\issluru| (\ref{slurtermin}, p.
\pageref{slurtermin}) or \keyindex{itenu}~$np$, \keyindex{itenl}~$np$ for tie
initiation, and \keyindex{tten}~$n$ to terminate it. As an example:

 \begin{music}
 \startextract
 \NOTes\itenl0d\itenl1e\itenu2g\itenu3j\zh{ceg}\hu j\enotes
 \bar
 \NOTes\tten0\tten1\tten2\tten3\zh{ceg}\hu j\enotes
 \endextract
 \end{music}
 \noindent was coded as:
 \begin{quote}\begin{verbatim}
 \begin{music}
 \startextract
 \NOTes\itenl0d\itenl1e\itenu2g\itenu3j\zh{ceg}\hu j\enotes
 \bar
 \NOTes\tten0\tten1\tten2\tten3\zh{ceg}\hu j\enotes
 \endextract
 \end{music}
 \end{verbatim}\end{quote}
 %\check


 \subsection{*Modifying slur properties}
Several macros are provided to modify the shape of slurs already initiated.
These macros must be coded before the slur termination. Note that only
compound slurs can be modified. Hence, calling any modification macro forces
the slur type to be compound.
 \subsubsection{*Changing the rise or fall}
 By default, the arch of a slur rises and falls from its original height
by three times the vertical
note spacing. This can be changed using the macro
\keyindex{midslur}~$h$ where $h$ is the revised vertical displacement.
For example, \verb|\midslur{6}| coded before \verb|\tslur| causes an upper
slur to rise to a maximum height of \verb|6\internote| above the starting
position. Note that \verb|\midslur| must be coded {\em immediately} before
the slur termination (eg, \verb|\tslur|). Coding \verb|\midslur| before
setting a simple slur causes problems and should be avoided.\\[20pt]

\begin{music}
\startextract
\NOtes\multnoteskip8\itieu0g\ql g\en
\notes\ttie0\ql g\en
\endextract
\startextract
\NOtes\multnoteskip8\itieu1g\ql g\en
\notes\midslur7\ttie1\ql g\en
\endextract
\startextract
\NOtes\multnoteskip8\itieu2g\ql g\en
\notes\midslur{11}\ttie2\ql g\en
\endextract
\end{music}
This was coded as:
\begin{quote}\begin{verbatim}
\startextract
\NOtes\multnoteskip8\itieu0g\ql g\en
\notes\ttie0\ql g\en
\endextract
\startextract
\NOtes\multnoteskip8\itieu1g\ql g\en
\notes\ttie0\midslur7\ttie1\ql g\en
\endextract
\startextract
\NOtes\multnoteskip8\itieu2g\ql g\en
\notes\midslur{11}\ttie2\ql g\en
\end{verbatim}\end{quote}
 \subsubsection{*Changing the curvature}
The degree of curvature depends primarily on the initial and terminal
gradient of the slur, relative to its mean slope. The macro
\keyindex{curve}~$hij$ allows these to be modified. The first parameter $h$
is the vertical deviation as for \verb|\midslur| described above. The second
parameter $i$ sets the initial gradient, while the third parameter $j$ sets
the
final gradient. The latter parameters are defined as the horizontal distance
required to attain maximum vertical deviation. Thus smaller numbers for $i$
and $j$ lead to more extreme gradients.
The default setting is \verb|\curve344|. Hence, coding \verb|\curve322|
doubles the initial and final gradient relative to the default.
As with \verb|\midslur|, \verb|\curve| must be coded {\em immediately} before
the slur termination.
Likewise, coding \verb|\curve| before
a simple slur causes problems and should be avoided.

The example below illustrates the use of \verb|\curve| more clearly.



\begin{music}
\startextract
\NOtes\multnoteskip8\itieu0g\ql g\en
\notes\ttie0\ql g\en
\endextract
\startextract
\NOtes\multnoteskip8\itieu1g\ql g\en
\notes\curve 322\ttie1\ql g\en
\endextract
\startextract
\NOtes\multnoteskip8\itieu2g\ql g\en
\notes\curve 111\ttie2\ql g\en
\endextract
\end{music}
This was coded as:
\begin{quote}\begin{verbatim}
\startextract
\NOtes\multnoteskip8\itieu0g\ql g\en
\notes\ttie0\ql g\en
\endextract
\startextract
\NOtes\multnoteskip8\itieu1g\ql g\en
\notes\curve 322\ttie1\ql g\en
\endextract
\startextract
\NOtes\multnoteskip8\itieu2g\ql g\en
\notes\curve 111\ttie2\ql g\en
\endextract
\end{verbatim}\end{quote}
 %\check



 \subsubsection{*Breaking slurs across a line}
Two macros are provided to control the behaviour of slurs which extend across
line breaks. Normally, the part of the slur before the line break is
treated as a tie.  This can be changed using \keyindex{breakslur}~$np$,
which sets the termination height of
the broken slur at the line break to pitch $p$, for slur reference number $n$.

After the line break, the slur is normally resumed at the initial pitch
reference, the one coded in \verb|\islur|. To change this, the macro
\keyindex{Liftslur}~$np$ may be used. Here $n$ is again the slur reference
number and $p$ is the change in height relative to the initialization height.
This macro is normally used following line breaks, in which case it is best
coded using the \verb|\atnextline| macro. For example, coding
\verb|\def\atnextline{\Liftslur06}| raises the continuation of slur zero
by \verb|6\internote| relative to its initialization height.

These macros are illustrated by the following example.
%%
% Example
%%
 %\check

 \subsubsection{*Inverting slur termination}
Occasionally in keyboard works one needs to begin a slur in one
stave but end it in another. This can be done using the macro
\keyindex{invertslur}~$n$ which is best described by reference to the example
shown below.

% Finding the final pitch is try and error, sorry, no way out.

\begin{music}
\setstaffs1{2}
\setclef1\bass
\startextract
\NOtes\multnoteskip5\isluru0a\ql a\en
\notes\invertslur0\curve311\tslur0g|\qu d\en
\NOtes\multnoteskip{10}\isluru0a\ql a\en
\notes\invertslur0\curve333\tslur0g|\qu d\en
\endextract
\end{music}
This was coded as:
\begin{quote}\begin{verbatim}
\setstaffs1{2}
\setclef1{\bass}
\startextract
\NOtes\multnoteskip5\isluru0a\ql a\en
\notes\invertslur0\curve311\tslur0g|\qu d\en
\NOtes\multnoteskip{10}\isluru0a\ql a\en
\notes\invertslur0\curve333\tslur0g|\qu d\en
\endextract
\end{verbatim}\end{quote}
 \subsection{Simple slurs}
Simple slurs and ties have the advantage
of optimal aesthetics and simple coding, but are limited in length to 68pt
for slurs and 220pt for
ties. Also, the maximum vertical extent of simple slurs is 8 times the
internote spacing, and the slurs may not extend across a line break.
Despite all these limitations, simple slurs are extremely useful in many
applications where the slurs are short and contained within a bar.

Simple slurs extend to the right of the note immediately following.
Hence they must be coded {\em before} the note at which the slur begins.
The primary macro call is
\keyindex{slur}~$p_1p_2sl$
where $p_1$ and $p_2$ are respectively the initial and final pitches,
$s$ is the sense, either {\tt u} or {\tt d}, and $l$ is the length,
in units of the current value of {\tt noteskip}.
Thus, thirds slured in pairs can be coded:

 %\check

\begin{quote}\begin{verbatim}
\NOtes\slur ced1\qu{ce}\en
\NOtes\slur dfd1\qu{df}\en
\NOtes\slur egd1\qu{eg}\en
\NOtes\slur{'e}cu1\ql{ec}\en
\NOtes\slur{'d}bu1\ql{db}\en
\NOtes\slur{'c}au1\ql{ca}\en
\end{verbatim}\end{quote}
which yields:

\begin{music}
\startextract
\NOtes\slur ced1\qu{ce}\en
\NOtes\slur dfd1\qu{df}\en
\NOtes\slur egd1\qu{eg}\en
\NOtes\slur{'e}cu1\ql{ec}\en
\NOtes\slur{'d}bu1\ql{db}\en
\NOtes\slur{'c}au1\ql{ca}\en
\endextract
\end{music}
%%
Similarly, ties may be set using
\keyindex{tie}~$psl$ where $p$ is the (single) pitch, and the other
parameters are as described above.

Variants on these macros are provided to change the slur length
and vertical offset relative to the starting note, as follows.
\begin{itemize}
  \item \keyindex{sslur}~$p_1p_2sl$, which sets a `short' slur,
        designed for the case when a slur is required to link notes which
        form part of a chord (see \verb|\isslur| above).
        The macro \keyindex{stie}~$psl$ sets analagous ties.
%!  \item \keyindex{bslur}~$p_1p_2sl$, which sets a `beam' slur, raised or
%!        lowered so that the slur links the ends of note stems rather than
%!        note heads.
\end{itemize}
 %\check

 \subsection{Restrictions}
Generation of some of the slur fonts is problematic for \MF.
In particular, the long ties tend to exceed \MF's
maximum dimension for high resolution printers. However, for normal 300 dpi
printers there is no problem. A solution to this limitation is planned
for Postscript\raise1.5ex\hbox{\small\copyright} printers using
DVIPS \verb|\special| commands.

\section{Bars}
 \subsection{Bars and spacing}
 Ordinary \ital{bars} are coded using the macro \keyindex{bar}. Its drawback
is that it does not differ from \verb|\bar| which is already defined in
\TeX's mathematical mode. \index{bar (original meaning)@{\Bslash bar}
\ital{(original meaning)}} Therefore, inside \verb|\startpiece...\endpiece|
\ital{our} \verb|\bar| means a musician \ital{bar}\footnote{\ital{Mesure} in
French, \ital{Takt} in German.} and outside, it keeps its original meaning.
If you \ital{really} need the original \verb|\bar| inside, you can say
\verb|\endcatcodesmusic...\bar...\catcodesmusic|.
 %\check

 \subsection{Bar numbering}
Unless otherwise specified, \index{bar numbering}bars are
numbered. This is a good means of finding errors provided that the \musixtex\
user has put comments in his source text recording the (expected) bar number.
However, this can look unpleasant for final outputs, since the habit is to
number bars only each other five or ten bars. This is not a serious problem
since the frequency of bar numbering is defined as:

 \verb|\def|\keyindex{freqbarno}\verb|{1}|

If you replace the {\tt1} by {\tt5}, bar numbering will occur each other five
bars. You can also inhibit any bar number\footnote{default inside this manual}
printing by telling:

\keyindex{nobarnumbers}

\noindent If you want to restore bar numbering after \verb|\nobarnumbers|,
you can say

\keyindex{barnumbers}

 The bar counter is also accessible, its name is \keyindex{barno}.
You can change it without any dramatic consequence.

Sometimes there is need for to start with a \verb|\barno| value which differs
from 1. Perhaps the piece starts with an \ital{upbeat}, then you can code

\keyindex{startbarno}\verb|=0|

\noindent in front of \verb|\startpiece|; or you may want to typeset only an
excerpt starting for example with bar number
198, then you can code \verb|\startbarno=198|. Pay attention because
saying \verb|\startbarno=|$n$ has a global meaning. So if you want to
\verb|\input| several pieces whose starting bar numbers differ, you have to
adjust the value of \verb|\startbarno|.

 %\check

The best compromise between information of the bar number and a pleasant
lookout is the command \keyindex{systemnumbers} which draws the bar numbers
only at the left top of every system (or staff? then the command will
be renamed to \verb|\staffnumbers| or \verb|\staffbarnumbers|).

You can influence the height of the system numbers by coding

\verb|\def|\keyindex{raisebarno}\verb|{|\ital{any \TeX~dimension}\verb|}|

\noindent whose default is set to \verb|4\internote| to fit above
a violin clef. You can influence its horizontal position with

\verb|\def|\keyindex{shiftbarno}\verb|{|\ital{any \TeX~dimension}\verb|}|

\noindent which default value is \verb|0pt|. If you don't like the
box around the bar number, you can redefine the macro which sets the system
bar number; its default is

\verb|\def|\keyindex{writebarno}%
  \verb|{\boxit{\eightbf\the\barno\barnoadd}}|

 \noindent where \keyindex{boxit} is a utility macro provided by \musixtex{}
whose purpose is to enclose its argument in a \raise-6pt\hbox{\boxit{box}}.

\medskip
\begin{music}
\let\extractline\hbox
\startbarno=36
\hbox to \hsize{%
\hss
  \raise20pt\hbox{(a) }%
  \systemnumbers\startextract
    \Notes\wh g\en
  \zendextract
\hss
  \def\writebarno{\tenrm\the\barno\barnoadd}%
  \def\raisebarno{2\internote}%
  \def\shiftbarno{2.5\Interligne}%
  \raise20pt\hbox{(b) }%
  \systemnumbers\startextract
    \Notes\wh g\en
  \zendextract
\hss
  \def\writebarno{\llap{\tenbf\the\barno\barnoadd}}%
  \def\raisebarno{2\internote}%
  \def\shiftbarno{1.3\Interligne}%
  \raise20pt\hbox{(c) }%
  \systemnumbers\startextract
    \Notes\wh g\en
  \zendextract
\hss}
\end{music}
which was coded as
\begin{itemize}
 \item[(a)] (default)
 \item[(b)]
  \begin{verbatim}
\def\writebarno{\tenrm\the\barno\barnoadd}%
\def\raisebarno{2\internote}%
\def\shiftbarno{2.5\Interligne}%
  \end{verbatim}
 \item[(c)]
  \begin{verbatim}
\def\writebarno{\llap{\tenbf\the\barno\barnoadd}}%
\def\raisebarno{2\internote}%
\def\shiftbarno{1.3\Interligne}%
  \end{verbatim}
\end{itemize}
If the previous line does not stop with a bar rule to the next system bar number
is added the \keyindex{writezbarno} whose default setting is the lower
character {\tt'a'}. If you want a {\tt'+}' instead, you can say

\verb|\def|\keyindex{writezbarno}\verb|{+}|

 %\check

\noindent Besides, you can suppress the messages of bar numbers on
\verb|stdout| (normally screen) with \keyindex{nobarmessage}. In the same way,
you can suppress the messages abour new lines (new systems) with
\keyindex{nolinemessages}.
 %\check

 \subsection{Full and instrument divided bars}
Normally, bars (as well as double bars, final bars and repeat bars) are
drawn as a continuous line, starting for the bottom of the lower staff of the
lower instrument, and ending at the top of the upper staff of the upper
instrument. However, one may want to have discontinuous bars, that is, one
continuous bar for all the staffs of a unique instrument. This is done by
issuing the command \keyindex{sepbarrules}. An example of this is given in the
{\tt ANGESCAO} (or {\tt ANGESCAM}) example; it has also been used in the
example of section \ref{avemaria}.

 The initial situation can be forced or restored by \keyindex{stdbarrules}. In
the extension library are some more types of bar rules, mainly for very old
music, see \ref{otherbars}.

\section{Managing the layout of your score}
\subsection{Line and page breaking}\label{linebreak}

Those who usually worked with \musictex\ before must be aware that this has
been deeply changed in \musixtex. All line-breaking decisions\footnote{With
exception of the \musictex\ command {\Bslash autolines}, which is provided in
the file {\tt musixcpt.tex}, see page \pageref{compatibility}.} are done by
the external program \verb|musixflx|. Then you get the most even results when
you insert the fewest \ital{manual} line breaks possible. But sometimes
there is really need for them, e.g. page break should preferably occur when
the musician has one hand free to turn the sheet.

You can force a line break with \keyindex{alaligne} instead of \keyindex{bar}.
In the same way, you can code \keyindex{alapage} to force an \keyindex{eject}
with proper reinitialization of staffs, clefs and signatures.

 %\check

 On the other hand, you may want to forbid line-breaking at a bar,
then you should replace \verb|\bar| with \keyindex{xbar}.

 Conversely, you may want to break a line \ital{not at a bar}\footnote{For
example, you may prefer to turn the page at a place where the pianist has one
hand free, in the middle of a bar.}. This is allowed by \keyindex{zbar}
(optional line break) or forced by \keyindex{zalaligne} or
\keyindex{zalapage}.

The heavy final double bar of a piece is provided by \keyindex{Endpiece} or
\keyindex{Stoppiece}. If you just want to terminate the text with a simple
bar, you say \keyindex{stoppiece} or \keyindex{endpiece}. If you want to
terminate it without a bar, you code \keyindex{zstoppiece}. Once you have
stopped the score by any of these means, you can restart it using
\keyindex{startpiece}, \keyindex{contpiece} or \keyindex{Contpiece} which
indents the next line taking account on the value of \keyindex{parindent}.
\verb|\Contpiece| can be used to change the number of instruments in one
piece.

 If you want the next vertical bar to be a double bar, you have to
declare \keyindex{doublebar} or \keyindex{setdoublebar} before the
\keyindex{bar} (or the \keyindex{stoppiece} or \keyindex{alaligne} or
\keyindex{alapage}) to be marked with a double thin bar. In the same way you
can declare \keyindex{setdoubleBAR} if you want to have a heavy double bar
(the same as \verb|\Stoppiece|) and even \keyindex{setemptybar} to make the
next \verb|\bar| invisible\footnote{These latter features are given for your
information, but they should be used only in case of emergency.}.

 %\check

\subsection{How to manage individual page layout}
\begin{enumerate}
 \item You write your own output routine, which centers the contents in middle
of the page. Most important are then the values of \keyindex{stafftopmarg}
and \keyindex{staffbotmarg}, because they decide of the amount of margin
between successive systems.
 \item If you say \keyindex{raggedbottom}, the vertical glue is removed and
the score is rather compacted at the top of page.
 \item You change the value of \keyindex{parskip} and say
\keyindex{normalbottom} (which behaves like \LaTeX's \keyindex{flushbottom}
and which is done by default working with \verb|plain.tex|). Then the
vertical space between the staffs is changed to get the first staff on page
on top and the last staff on page to bottom (depends on \keyindex{vsize}).
It might be clever to insert a \keyindex{eject} before the \keyindex{bye}.
\keyindex{musicparskip} set between two systems no extra distance, but the
possibility to increase the distance up to \verb|5\Interligne|.
\end{enumerate}
\noindent
Besides, following values of e.g.~paper size are changed
(only if you \ital{do not} work with \LaTeX) to:
\begin{quote}\begin{verbatim}
\parindent= 0pt
\hoffset= -15.4mm
\voffset= -10mm
\hsize= 190mm
\vsize= 260mm
\end{verbatim}\end{quote}
\zkeyindex{parindent}\zkeyindex{hoffset}\zkeyindex{voffset}
\zkeyindex{hsize}\zkeyindex{vsize}

 %\check

\subsection{How to adjust the global line and page layout}\index{page and line
layout (global)}

 Once you have made your whole score, you will probably find out that all
systems (all ``lines'') have a correct layout with nice beams, nice slurs, and
others. But it is likely that:
 \begin{itemize}
 \item The result takes too many or too few pages and you estimate a more or
less compact score would be suitable.
 \item The results takes a convenient number of pages, but the last page
exhibits a widow line or an ugly blank space at the end.
 \end{itemize}

 To solve this, you way revert to two strategies:
 \begin{enumerate}
  \item Explicitely force line and page breaking at the very places you like;
  this can be done using \verb|\alaligne|, \verb|\alapage|, \verb|\zalaligne|
or \verb|\zalapage| commands. This can also be sone using the
\verb|\autolines| command imported from \musictex\ and provided in the {\tt
musixcpt.tex} additional file. But these way of doing may result in
unfortunately uneven distribution of the notes in the score, which is therefore
not very smart.
  \item Adapt both the \keyindex{mulooseness} and the global value of
\keyindex{elemskip}: increasing \verb|\mulooseness| (whose default is 0)
increases the total number of systems, and if you are clever you may be able
to fill an integer number of pages. Besides, increasing the stated
\verb|\elemskip| (use \verb|\showthe\elemskip| to find its default value) also
makes note spacing wider, and its advantage is that you can tune it by half a
percent if needed.

\begin{remark} \verb|\elemskip| can be retrieved in both the first and the third
pass (second \TeX-ing pass), but any assignment of a value (a dimension value)
to \verb|\elemskip| will be of no effect at third pass, since it is taken from
the {\tt *.mx2} file yielded by {\tt musixflx}. On the contrary, assigning a
value to \keyindex{noteskip} within \verb|\notes...\enotes| is efficient in
both passes, and cause some weird errors if you mix up scalable and not
scalable dimensions.
 \end{remark}
 \end{enumerate}
 %\check

\section{Changing score attributes}

 As seen before, you can change the signature of the whole set of instruments
by \keyindex{generalsignature}~$n$ where $n>0$ means a number of sharps, $n<0$
means a number of flats. Or, you may prefer to change the signature of only
one or two instruments by the statement:

\keyindex{setsign} $n$\verb|{|$s$\verb|}|

 %\check

\noindent
 where $n$ is the number of the instrument considered, and $s$ its
specific signature. Since you may change simultaneously (with respect to the
score) but consecutively (with respect to your code) the signatures of
several instruments, this change takes place only when you say
\keyindex{changesignature} (within a bar) or \keyindex{changecontext} (after
a single vertical rule) or \keyindex{Changecontext} (after a double vertical
rule) or \keyindex{zchangecontext} (without a bar rule\footnote{Old composers
uses the bar rules very rarely}).
 In the same way, you may want to change the active clefs.
This is done by

\keyindex{setclef}\verb|{|$n$\verb|}{|$s_1s_2s_3s_4$\verb|}%|

 %\check

\noindent where $r$ is the number of the instrument, $s_1$ specifies the clef
of the lower staff, $s_2$ the clef of the second staff, etc. $s_1=6$ means the
\ital{bass} clef (\ixem{clef de fa} in French), $s_1=0$ means the \ital{violin}
clef (\ixem{clef de sol} in French), $s_1=1$ through $s_1=4$ mean the
\ital{alto} clef (\ixem{clef d'ut} in French) set on first (lower) through
fourth (next to upper line of the staff), $s_1=5$ or $s_1=6$ mean the bass clef
on the third or fourth line respectively.\index{violin clef}\index{bass
clef}\index{alto clef}

 As seen above in the case of signatures, several clefs may be changed at the
same time; thus all the clef changes become operational only when the macro
\keyindex{changeclefs} is coded. Normal usage consists in issuing this
command before the bar, not after (this helps the music player when the
change happens across a line break).
 %\check

 The \verb|\changeclefs| command normally takes some horizontal space to put
one of more clef symbols, but it may happen that you have no notes
immediately before on the staff whose clef is changed. In that case, you can
use \keyindex{zchangeclefs} which performs the same posting, overwritten left on
the last part of the score in that staff. Of course it is your responsibility
to ensure that no notes will collide with the clef change symbols.
 %\check

The \musictex\ problem if a clef change is coded while one or several beams
are pending has been removed in \musixtex. As an enhanced example, we provide
an excerpt of {\sc Brahms}'s Intermezzo op.~117,1 initially coded by Miguel
{\sc Filgueiras}:\index{Brahms, J.@{\sc Brahms, J.}}\medskip

\begin{music}
\setstaffs1{2}
\interstaff{11}
\setclef1\bass % F- and G-clefs
\generalsignature{-3}% 3 flats
\parindent-4mm
\advance\hsize8mm
\startpiece
\qspace\nspace
\Notes\arpeggio E5\ibslurd0o\zq{EI}\qu N%
  \nextstaff\ibl0e{-2}\zq{eg}\qb0l\zq d\qb0k\enotes
\setclef1\treble\zchangeclefs
\nspace
\Notes\tbu0\zq{ce}\qb0j\nextstaff\zq{sn}\cl l\enotes
\notes\curve{-4}22\invertslur0\tslur0t\zq{be}\qu i\nextstaff\zq{sn}\ql l\enotes
\setclef1\bass\changeclefs
\notes\islurd0k\zq E\cu I\nextstaff
  \ibbu1h{-3}\zq{ae}\qb1h\tbu1\zq N\qb1g\enotes
\bar
\Notes\ibu0L{-2}\zq{EI}\qb0M\zqb0L%
  \nextstaff{\stemlength4\zql N}\ibu1f{-2}\qb1f\tbu1\zqb1e\hsk\enotes
\setclef1\treble\changeclefs
\nspace
\Notes\tbu0\zq{Me}\qb0g\nextstaff\zq{ln}\cl s\en
\notes\curve{-4}22\invertslur0\tslur0q\zq{be}\qu i\nextstaff\zq{ln}\ql s\en
\setclef1\bass\changeclefs
\notes\islurd0m\zq G\cu L\nextstaff
  \ibbu1j3\zq c\qb1j\tbu1\zq d\qb1k\enotes
\bar
\Notes\zq G\qu L%
  \nextstaff\ibl0e{-2}\zq{ei}\qb0l\zq d\zqb0k\enotes
\setclef1\treble\changeclefs
\nspace
\Notes\tbu0\zq{ce}\qb0j\nextstaff\zq{sn}\cl l\enotes
\notes\curve{-5}22\invertslur0\tslur0o\zq{be}\qu i\nextstaff\zq{sn}\ql l\enotes
\setclef1\bass \changeclefs
\notes\zq B\cu I\nextstaff\ibsluru0j%
  \ibbu1h{-3}\zq{ae}\qb1h\tbu1\zq N\qb1g\enotes
\bar
\Notes\zq{IL}\ql N\nextstaff\zql b\ibu0i{-2}\qb0i\enotes
\scale{.5}%
\Notes\nextstaff\qb0e\enotes
\Notes\nextstaff\tinynotesize\isluru1f\grcu g\enotes
\scale\normalvalue
\Notes\zq B\cu I\nextstaff\zcl a\tslur1f\tbu0\zq d\qb0f\enotes
\Notesp\zq E\qu I\nextstaff\tslur0e\zq N\zql e\ibu0g6\qbp0e\enotes
\notes\sk\icresc\cu E\sk\zmidstaff\tcresc\nextstaff
  \ibsluru0i\nbbu0\qb0g\zq i\zcl g\qb0i\tbu0\qb0n\tubslur0k\enotes
\endpiece
\end{music}


\noindent The first bar of this excerpt was coded as:
 \begin{verbatim}
\begin{music}
\instrumentnumber{1}
\setstaffs1{2}
\interstaff{11}
\setclef1\bass % F- and G-clefs
\generalsignature{-3}% 3 flats
\parindent0pt
\startpiece
\qspace\nspace
\Notes\arpeggio E5\ibslurd0o\zq{EI}\qu N%
  \nextstaff\ibl0e{-2}\zq{eg}\qb0l\zq d\qb0k\enotes
\setclef1\treble\zchangeclefs
\nspace
\Notes\tbu0\zq{ce}\qb0j\nextstaff\zq{sn}\cl l\enotes
\notes\invertslur0\tslur0t\zq{be}\qu i\nextstaff\zq{sn}\ql l\enotes
\setclef1\bass \changeclefs
\notes\islurd0k\zq E\cu I\nextstaff
  \ibbu1h{-3}\zq{ae}\qb1h\tbu1\zq N\qb1g\enotes
\end{music}\end{verbatim}%
\ital{Meter} changes are implemented in following way:

\keyindex{setmeter} $n$%
  \verb|{{|$m1$\verb|}{|$m2$\verb|}{|$m3$\verb|}{|$m4$\verb|}}%|

\noindent
 where $n$ is the number of the instrument, $m1$ specifies the meter
of the lower staff, $m2$ the meter of the second staff, etc. (if necessary!).

Since meter changes
are meaningful only across bars, they are actually taken in account with
\keyindex{changecontext} or \keyindex{Changecontext} or
\keyindex{zchangecontext} or \keyindex{alaligne} or \keyindex{alapage}.

\section{Repeats}

To insert a \ital{repeat bar} you can use following sets of procedures,
namely \keyindex{leftrepeat}, \keyindex{rightrepeat} and
\keyindex{leftrightrepeat}, which are substitute the \keyindex{bar}.
For example:

\begin{music}
\startextract
\NOTes\ha g\enotes
\leftrepeat
\NOTes\ha h\enotes
\leftrightrepeat
\NOTes\ha i\enotes
\rightrepeat
\NOTEs\wh j\enotes
\endextract
\end{music}
 \noindent has been coded as:
\begin{quote}\begin{verbatim}
\NOTes\ha g\enotes
\leftrepeat
\NOTes\ha h\enotes
\leftrightrepeat
\NOTes\ha i\enotes
\rightrepeat
\NOTEs\wh j\enotes
\end{verbatim}\end{quote}
Special cases are forced line breaks:
if you want to force a new line at a repeat, you should code
respectively:

\begin{quote}
\noindent\keyindex{setrightrepeat}\keyindex{alaligne}\\
\keyindex{setrightrepeat}\keyindex{endpiece}\\
\keyindex{alaligne}\keyindex{leftrepeat}\\
\keyindex{contpiece}\keyindex{leftrepeat}\\
\keyindex{startpiece}\keyindex{leftrepeat}
\end{quote}

\noindent or the combination of two of these in the case of a left/right
repeat.

 A second way of coding consists in saying \keyindex{setleftrepeat},
\keyindex{setrightrepeat} or \keyindex{setleftrightrepeat} before a bar
(\keyindex{bar}), \keyindex{stoppiece} or \keyindex{changecontext}). In
this case, the next single vertical bar will be replaced with the selected
repeat bar. This meets the traditional music typesetting conventions in the
only case of the \ital{right repeat} but, unfortunately, left and left/right
repeats use to behave in a different manner when in the middle of a line and
at a line break.
 \subsection{Specific first and second pass scoring}

A frequent situation consists in a long part of score repeated two or several
times, but its last few bars are different at first pass and at second pass.
This can be specified by saying
\keyindex{setvolta}\verb|{|\ital{text}\verb|}| or
\keyindex{setvoltabox}\verb|{|\ital{text}\verb|}| before the \keyindex{bar}
beginning the part specific to that first or second part\footnote{The word
``volta'' comes from Italian, it means ``time'' in the sense of ``first
time'', ``second time'' or ``pass'' in trat case.}. For example:

\medskip \begin{music}
 \parindent0pt \startpiece \addspace\afterruleskip
\NOTEs\wh a\en\bar \NOTEs\wh b\en\setvoltabox{1.-3}\bar \NOTEs\wh
c\en\setvolta4\rightrepeat \NOTEs\wh d\en\doublebar \NOTEs\wh e\en\bar
\NOTEs\wh f\en\leftrepeat \NOTEs\wh g\en\bar \NOTEs\wh h\en\Setvolta1\bar
\NOTEs\wh i\en\bar \NOTEs\wh j\en\Setvolta2\endvoltabox\rightrepeat \NOTEs\wh
i\en\bar \NOTEs\wh h\en\endvoltabox\Endpiece \end{music} \noindent has been
coded as:
 \begin{quote}\begin{verbatim}
 \startpiece \addspace\afterruleskip
 \NOTEs\wh a\en\bar
 \NOTEs\wh b\en\setvoltabox{1.-3}\bar
 \NOTEs\wh c\en\setvolta4\rightrepeat
 \NOTEs\wh d\en\doublebar
 \NOTEs\wh e\en\bar
 \NOTEs\wh f\en\leftrepeat
 \NOTEs\wh g\en\bar
 \NOTEs\wh h\en\Setvolta1\bar
 \NOTEs\wh i\en\bar
 \NOTEs\wh j\en\Setvolta2\endvoltabox\rightrepeat
 \NOTEs\wh i\en\bar
 \NOTEs\wh h\en\endvoltabox
 \Endpiece
\end{verbatim}\end{quote}
 \zkeyindex{leftrepeat}\zkeyindex{rightrepeat} The
``volta'' symbols are normally set at \verb|4\internote| above the upper line
of the staff and one bar(length?) wide.

 If the music typesetter wants to
include more than one bar, he can code
\keyindex{Setvolta}\verb|{|\ital{text}\verb|}| before the bar he wants the
``volta'' to begin, and put \keyindex{endvolta} or \keyindex{endvoltabox}
before the bar they should end.

 If he wants to change the altitude of the ``volta'', he can
redefine \keyindex{raisevolta}, e.g.:

 \verb|\def\raisevolta{7\internote}|

 \noindent or define it to be any other valid dimension.

 \subsection{Large scope repeats and orientation marks}

Large scope repeats have also been provided
with special symbols, namely \keyindex{coda}~$p$, \keyindex{Coda}~$p$,
\keyindex{segno}~$p$, where $p$ specifies the pitch. A bigger symbol is
\keyindex{Segno} with no argument. For example, the following figure

\begin{music}
\startextract
\NOtes\segno n\enotes
\bar
\NOtes\coda n\enotes
\NOtes\Segno\enotes
\bar
\NOtes\Coda n\enotes
\endextract
\end{music}
\noindent has been coded:
\begin{quote}\begin{verbatim}
\NOtes\segno m\enotes\bar
\NOtes\coda m\enotes
\NOtes\Segno\enotes\bar
\NOtes\Coda m\enotes
\end{verbatim}\end{quote}
Orientation marks are set more often above larger orchestral pieces for
easy come together of all instruments for exercise reasons. Often used are
circled or boxed uppercase characters or digits. This can be done with

\keyindex{boxit}\verb|{|\ital{text}\verb|}|~~~or\\
\indent\keyindex{circleit}\verb|{|\ital{text}\verb|}|

\noindent The distance between the box and the including text is influenced by

\keyindex{boxitsep}\verb|=|\ital{any \TeX\ dimension}

which is setup by default to \verb|3pt|. The usage is recommended with
\keyindex{Uptext}, \keyindex{zcharnote}, \keyindex{zchar} or
\keyindex{ccharnote}.

\subsection{Repeating the last bar}
 This can be done using the symbol \keyindex{duevolte} (often used with
\verb|\centerbar|, see example in \ref{barcentered}, p.
\pageref{barcentered}), e.g.:

\begin{music}
\generalmeter\meterC
\setclef1\bass\setstaffs1{2}
\startextract
\NOtes\sk\sk\pause|\qa{cegj}\en
\bar\NOtes\qa{cdef}|\sk\sk\duevolte\en
\endextract
\end{music}
whose coding is:
\begin{quote}\begin{verbatim}
\generalmeter\meterC
\setclef1\bass\setstaffs1{2}
\startextract
\NOtes\sk\sk\pause|\qa{cegj}\en
\bar\NOtes\qa{cdef}|\sk\sk\duevolte\en
\endextract
\end{verbatim}\end{quote}

 %\check

\section{Miscellaneous}
 \subsection{Putting anything anywhere}
\noindent Special macros are provided to help the composer to set any \TeX\
text on the staffs. The macro

\keyindex{zcharnote}~$p$\verb|{|text\verb|}|

\noindent
sets the given text with its base line at pitch $p$ of the current staff
(this means it must be coded inside \verb|\notes...\enotes|).
Whatever the length of the text, no spacing occurs.
If you want the possible spilling text to expand on the left rather than
on the right, then you can use \keyindex{lcharnote}.
If you want the possible spilling text centered to current position,
then you can use \keyindex{ccharnote} which causes no space.

The macro \keyindex{zcharnote} is fit for coding special notations like
accents above or below the notes. Also available are \keyindex{zchar},
\keyindex{lchar} and \keyindex{cchar}, which
allows only numbers for pitch, but enables the use of floats too.

To place some text at the mid-position between the two staffs of
a keyboard instrument, you may code:
\begin{quote}
\keyindex{zmidstaff}\verb|{|{\it text}\verb|}%| (to right)\\
\keyindex{lmidstaff}\verb|{|{\it text}\verb|}%| (to left)\\
\keyindex{cmidstaff}\verb|{|{\it text}\verb|}%| (centred)
\end{quote}
\noindent being however
careful, a) to put it inside \verb|\notes...\enotes|, b) to code it in the
text of the lower staff.

 A text to be put above the current staff is introduced by
\keyindex{uptext}\verb|{...}|.
This may however cause some collision with bar
numbering or notes above the staff; it is then wise to use
\keyindex{Uptext}\verb|{...}|
which puts the text two note line distances higher (recommended to post
the tempo).
 \subsection{Fonts} The text fonts loaded by \musixtex\ come in six different
type sizes and three styles. The type sizes are 8\,pt, 10\,pt, 12\,pt, 14\,pt,
17\,pt and 25\,pt, while the three styles are roman, bold and italic. The
three smaller type sizes are available in all three styles, while the larger
three sizes, which are intended for titles, are available only in bold style.
The size selection macros are respectively \keyindex{smalltype},
\keyindex{normtype}, \keyindex{medtype}, \keyindex{bigtype},
\keyindex{Bigtype} ,
\keyindex{BIgtype} and \keyindex{BIGtype}. Following the size selection, the
style may be selected or changed using \keyindex{rm} (roman), \keyindex{bf}
(bold) or \keyindex{it} (italic). If no style selection is made, roman style
will result for the sizes smaller than \verb|\medtype|. For the larger sizes,
style selection is not required since only bold style is provided. Thus,
selection of eight point italic is done using \verb|\smalltype\it|, while
twelve point roman is selected using \verb|\medtype\rm| or simply
\verb|\medtype|. To change between styles while maintaining the same size,
code \verb|\rm|, \verb|\it| or \verb|\bf| as in Plain \TeX. This information
is summarized in the following table.

\begin{center}
  \begin{tabular}{clc}
    \hline
    Size, pt & Size selection    &  Style selection \\
    \hline
     8       & \verb|\smalltype| & \verb|\rm, \bf, \it| \\
    10       & \verb|\normtype|  & \verb|\rm, \bf, \it| \\
    12       & \verb|\medtype|   & \verb|\rm, \bf, \it| \\
    14       & \verb|\bigtype|   & \verb|    (\bf)    | \\
    17       & \verb|\Bigtype|   & \verb|    (\bf)    | \\
    20       & \verb|\BIgtype|   & \verb|    (\bf)    | \\
    25       & \verb|\BIGtype|   & \verb|    (\bf)    | \\
    \hline
  \end{tabular} \end{center} Two other text fonts are provided for dynamic
markings. These are \keyindex{ppffsixteen}, \keyindex{ppfftwenty} and
\keyindex{ppfftwentyfour}, suitable for dynamic markings with staff sizes of
16\,pt, 20\,pt and 24\,pt respectively. The appropriate font for the current
staff size may be selected by coding \keyindex{ppff}.

Naturally other fonts may be loaded by the user if required.
When \musixtex\ is started, the default text font is
ten point roman, equivalent to \verb|\normtype\rm|.
 \subsubsection{Examples}
\begin{center}
  \begin{tabular}{ll}
    \hline
    Size and style  &  Example \\
    \hline
    \verb|\smalltype|    & {\smalltype    small roman}  \\
    \verb|\smalltype\bf| & {\smalltype\bf small bold}   \\
    \verb|\smalltype\it| & {\smalltype\it small italic} \\
    \verb|\normtype|     & {\normtype     normal roman} \\
    \verb|\normtype\bf|  & {\normtype\bf  normal bold}  \\
    \verb|\normtype\it|  & {\normtype\it  normal italic}\\
    \verb|\medtype|      & {\medtype      medium roman} \\
    \verb|\medtype\bf|   & {\medtype\bf   medium bold}  \\
    \verb|\medtype\it|   & {\medtype\it   medium italic}\\
    \verb|\bigtype|      & {\bigtype      big bold}     \\
    \verb|\Bigtype|      & {\Bigtype      Big bold}     \\
    \verb|\BIgtype|      & {\BIgtype      BIg bold}     \\
    \verb|\BIGtype|      & {\BIGtype      BIG bold}     \\
    \verb|\ppffsixteen|  & {\ppffsixteen  pp ff diminuendo}\\
    \verb|\ppfftwenty|   & {\ppfftwenty   pp ff crescendo}\\
    \verb|\ppfftwentyfour|   & {\ppfftwentyfour   pp ff crescendo}\\
    \hline
  \end{tabular}
\end{center}
 \subsection{Metronomic indications}
Metronomic indication deserves a special macro. The mention:

\medskip
\centerline{\def\nbinstruments{0}\metron{\hup}{60}}\smallskip\noindent
is coded by \keyindex{metron}\verb|{\hup}{60}| (normally embedded in
\keyindex{Uptext} which is in turn embedded within \verb|\notes...\enotes|).
 \subsection{Accents}
\begin{itemize}
 \item \keyindex{upz}~$p$ (upper \ital{pizzicato}) to put a dot above a note
head at pitch $p$,
 \item \keyindex{lpz}~$p$ (lower \ital{pizzicato}) to put a dot below a note
head at pitch $p$,
 \item \keyindex{usf}~$p$ (upper \itxem{sforzando}) to put a $>$ accent above
a note head at pitch $p$,
 \item \keyindex{lsf}~$p$ (lower \itxem{pizzicato}) to put a $>$ accent below
a note head at pitch $p$,
 \item \keyindex{ust}~$p$ (upper \itxem{staccato} or \itxem{portato}) to put a
hyphen above a note head at pitch $p$,
 \item \keyindex{lst}~$p$ (lower \ital{staccato} or \ital{portato}) to put a
hyphen below a note head at pitch $p$,
 \item \keyindex{uppz}~$p$ (upper strong \ital{pizzicato}) to put an
apostrophe above a note head at pitch $p$,
 \item \keyindex{lppz}~$p$ (lower strong \ital{pizzicato}) to put a reversed
apostrophe below a note head at pitch $p$.
 \item \keyindex{ufz}~$p$ (upper \ital{sforzato}) to put a
`roof' above a note head at pitch $p$,
 \item \keyindex{lfz}~$p$ (lower \ital{sforzato}) to put a reversed
`roof' below a note head at pitch $p$.
 \item \keyindex{upzst}~$p$ (upper \ital{tenuto/staccato}) to put a
combined tenuto/staccato sign above a note head at pitch $p$,
 \item \keyindex{lpzst}~$p$ (lower \ital{tenuto/staccato}) to put a
combined tenuto/staccato sign below a note head at pitch $p$.
 \item \keyindex{flageolett}~$p$ to put a
thin circle above a note head at pitch $p$.
 \item \keyindex{upbow} to indicate a bowing for strings in upper direction.
 \item \keyindex{downbow} opposite to {\Bslash upbow}.
\end{itemize}
Because whole notes (breve, arbitrary, ...) have a different note head width
the accents appear not centered above them. Therefore you can use
\keyindex{wholeshift}\verb|{|\ital{text}\verb|}| which centers accents
and others
which are centered above a quarter note head to appear centered above
a whole note. This is used for e.g.~\verb|\Fermataup|.

Also available are the variants\footnote{Thanks to Klaus {\sc Bechert}'s
corrections.} of the most used accents which will be automatically positioned
above or below a beam. Therefore the known accents are preceeded with the
letter `b' and, instead of the pitch, the beam reference number is appended as
an argument. Thus

\medskip
\begin{music}
\startextract
\Notes\ibu0f3\busfz0\qb0f\bupz0\qb0g\bust0\qb0h%
  \buppz0\qb0i\busf0\qb0j\butext0\tqh0k\en
\Notes\Ibl0lg5\blsfz0\qb0l\blpz0\qb0k\blst0\qb0j%
  \blppz0\qb0i\blsf0\qb0h\bltext0\tqb0g\en
\endextract
\end{music}
\noindent was coded as:
\begin{verbatim}
\startextract
\Notes\ibu0f3\busfz0\qb0f\bupz0\qb0g\bust0\qb0h%
  \buppz0\qb0i\busf0\qb0j\butext0\tqh0k\en
\Notes\Ibl0lg5\blsfz0\qb0l\blpz0\qb0k\blst0\qb0j%
  \blppz0\qb0i\blsf0\qb0h\bltext0\tqb0g\en
\endextract
\end{verbatim}
\zkeyindex{busfz}
\zkeyindex{bupz}
\zkeyindex{bust}
\zkeyindex{buppz}
\zkeyindex{busf}
\zkeyindex{butext}
\zkeyindex{blsfz}
\zkeyindex{blpz}
\zkeyindex{blst}
\zkeyindex{blppz}
\zkeyindex{blsf}
\zkeyindex{bltext}
 \subsection{*Indication of \ital{x}-tuplets}

 Triplets and other $x$-tuplets --- in practice the italic numbers \ital{3},
\ital{4}, \ital{5}, etc. can be set at the right horizontal/vertical position
invoking the  \keyindex{triplet} or \keyindex{xtuplet} macros at the leftmost
position of the group, i.e. before the first note is coded.

 {\Bslash triolet} has only one argument, the pitch of the bottom of the
figure 3, {\Bslash xtuplet} has two arguments: the figure and its pitch.

If the figure has to be put above an upper beam or below a lower beam, using
the macros \keyindex{butext} (above) and \keyindex{bltext} (below) is advisable
to post the figure above or below the given beam. {\Bslash butext}
and {\Bslash bltext} have one argument, namely the beam number (namely the
same as the first argument of commands such as {\Bslash ibu} or {\Bslash
Ibu}). If the group of notes is not a triolet, the actual figure has to be
changed, redefining the macro \keyindex{txt} which is set up by default to:

\verb|\def\txt{\eightit 3}%|

\begin{music}
\parindent0mm
\generalmeter{\meterfrac24}
\startpiece
\addspace\afterruleskip
\notesp\xtuplet6n\isluru0l\ibl0l0\qb0{lllll}\tslur0l\tqb0l\en\bar
\notesp\triolet n\isluru0l\Ibl0ln2\qb0{lm}\tslur0n\tqb0n\en
\notesp\ibslurd0k\Ibl0km2\qb0k\bltext0\qb0l\tdbslur0m\tqb0m\en\bar
\Notesp\triolet o\isluru0l\ql{lm}\tslur0n\ql n\en\bar
\Notesp\uptrio o16\ql l\en\notesp\cl n\en
\Notesp\uptrio p16\ql m\en\notesp\cl o\en
\endpiece
\begin{quote}\begin{verbatim}
\notesp\xtuplet6n\isluru0l\ibl0l0\qb0{lllll}\tslur0l\tqb0l\en\bar
\notesp\triolet n\isluru0l\Ibl0ln2\qb0{lm}\tslur0n\tqb0n\en
\notesp\ibslurd0k\Ibl0km2\qb0k\bltext0\qb0l\tdbslur0m\tqb0m\en\bar
\Notesp\triolet o\isluru0l\ql{lm}\tslur0n\ql n\en\bar
\Notesp\uptrio o16\ql l\en\notesp\cl n\en
\Notesp\uptrio p16\ql m\en\notesp\cl o\en
\end{verbatim}\end{quote}
\end{music}
\zkeyindex{xtuplet}\zkeyindex{triolet}
%\xtuplet{text}{pitch}
%  centers text(3 on second note, 4 between second and thirdnote,
%  5 on third note) on notes (-> \triolet{pitch})
 \subsection{*Usual ornaments}

 \subsubsection{Arpeggios}
\ital{Arpeggios} (i.e.~~~\arpeggio{-2}3) can be coded with the macro

\keyindex{arpeggio} $pm$

\noindent where $p$ is the pitch of
the base of the arpeggio symbol and $m$ is its multiplicity (one period is
equal to one space between staff lines, i.e. 5 points). This macro causes
no spacing. If should be issued before the concerned
chords. Its variant \keyindex{larpeggio} sets the arpeggio symbol nearly
one note head width on the left, in order to avoid collision with accidentals
in front of the chords.

 \subsubsection{Trills}
 Trills\index{trills} can be coded in several ways.
\keyindex{trille}~$pl$ (where $p$ is the pitch and $l$ is a number of current
\ital{noteskip}) yields \hbox to 1cm{\noteskip1cm\trille11\hss} while
\keyindex{Trille}~$pl$ yields \hbox to 2cm{\noteskip1cm\Trille12\hss}.

 For longer trills expanding over bars and line breaks, a better way consists
in specifying the beginning with \keyindex{Itrille}~$np$ where $n$ is the
trill reference number ($0\le n<6=$\keyindex{maxtrills}) and terminate it with
the command \keyindex{Ttrille}~$n$. If one wants the {\it tr} mention at the
beginning, then one should use \keyindex{ITrille}~$np$. The ancient commands
\keyindex{itrille}, \keyindex{ttrille}~$p$ and \keyindex{tTrille}~$p$ still
work but beware that their syntax is different, that the opening and the
closing must be in the same bar and that the use the same registers as
\verb|\Itrille 0|.

\medskip
\begin{remark} \verb|trille| and \verb|Trille| also exist in \musictex.
Unfortunately, the same macro names do not have the same syntax and the same
semantic in both packages and {\ttxem{musixcpt.tex}} forces the behaviour and
the syntax of \musictex. A solution to this problem consists in using
\keyindex{trilleC} and \keyindex{TrilleC} to have the \musictex{} behaviour,
and \keyindex{trilleX} and \keyindex{TrilleX} to have the \musixtex{}
behaviour, even when {\tt musixcpt} is invoked.
\end{remark}

For example:

\medskip
 \begin{music}
\instrumentnumber{1}
\setstaffs12
\setclef1{6000}
%
\startextract
\notes\qu{CDEFGH}|\hu k\sk\ITrille 1p\itenu1l\wh l\enotes
\bar
\notes\Itrille 2A\itenu2E\whp E|\tten1\hlp l\sk\Ttrille 1\qu {mno}\enotes
\bar
\Notes\tten2\itenu2E\whp E|\ql{nmlkji}\enotes
\bar
\Notes\tten2\whp E\sk\sk\sk\sk\Ttrille2|\qu{hgfedc}\enotes
\endextract
\end{music}
whose coding is
\begin{quote}\begin{verbatim}
\begin{music}
\instrumentnumber{1}
\setstaffs12
\setclef1{6000}
%
\startextract
\notes\qu{CDEFGH}|\hu k\sk\ITrille 1p\itenu1l\wh l\enotes
\bar
\notes\Itrille 2A\itenu1e\whp E|\tten1\hlp l\sk\Ttrille 1\qu {mno}\enotes
\bar
\Notes\tten1\itenu1E\whp E|\ql{nmlkji}\Toctfin1\enotes
\bar
\Notes\tten1\whp E\sk\sk\sk\sk\Ttrille2|\qu{hgfedc}\enotes
\endextract
\end{verbatim}\end{quote}

 \subsubsection{Piano pedal commands}
 \keyindex{PED} inserts the piano pedal command below the staff; pedal release
is specified by \keyindex{DEP}; also available are shorter variants of the
pedal signs which are invoked with \keyindex{sPED} and \keyindex{sDEP}; thus
the following example

\begin{music}
\setclef1\bass
\setstaffs1{2}
\startextract
\NOtes\PED\wh J|\qu h\enotes
\NOtes|\qu g\enotes
\NOtes|\hu k\enotes
\Notes\DEP\enotes
\bar
\NOtes\sPED\wh J|\qu h\enotes
\NOtes|\qu g\enotes
\NOtes|\hu k\enotes
\Notes\sDEP\enotes
\endextract
\end{music}
 \noindent was coded as: \begin{quote}\begin{verbatim}
 \NOtes\PED\wh J|\qu
h\enotes
 \NOtes|\qu g\enotes
 \NOtes|\hu k\enotes
 \Notes\DEP\enotes \bar
 \NOtes\sPED\wh J|\qu h\enotes
 \NOtes|\qu g\enotes
 \NOtes|\hu k\enotes
 \Notes\sDEP\enotes
 \end{verbatim}\end{quote}

 The vertical position of
\keyindex{PED}, \keyindex{sPED}, \keyindex{DEP} and \keyindex{sDEP} can be
globally changed by redefining its elevation, which is setup by default to

\verb|\def|\keyindex{raiseped}\verb|{-5}%|

If you only want to change a few of them, you can use the more fundamental
macros \keyindex{Ped}, \keyindex{sPed}, \keyindex{Dep} and \keyindex{sDep}
in combination with \keyindex{zchar} or \keyindex{zcharnote}.

 Since the \hbox to 1cm{ \Ped\hss} symbol is rather wide, it might collide
with bass notes in an ugly way. Then a solution consists in shifting if to the
left, by coding \verb|\loff{\PED}|.

 \subsubsection{Other ornaments}\index{ornaments}

 \begin{itemize}
 \item \keyindex{mordent}~$p$ for \hbox to .75em{\mordent 0\hss},
 \item \keyindex{Mordent}~$p$ for \hbox to 1.5em{\kern 0.6em\Mordent 0\hss},
 \item \keyindex{shake}~$p$ for \hbox to .75em{\shake 0\hss},
 \item \keyindex{Shake}~$p$ for \hbox to 1.5em{\kern 0.6em\Shake 0\hss},
 \item \keyindex{Shakel}~$p$ for \hbox to 1.5em{\kern 0.6em\Shakel 0\hss},
 \item \keyindex{Shakesw}~$p$ for \hbox to 1.5em{\kern 0.6em\Shakesw 0\hss},
 \item \keyindex{Shakene}~$p$ for \hbox to 1.5em{\kern 0.6em\Shakene 0\hss},
 \item \keyindex{Shakenw}~$p$ for \hbox to 1.5em{\kern 0.6em\Shakenw 0\hss},
 \item \keyindex{turn}~$p$ for \hbox to 1.5em{\kern 0.6em\turn 0\hss},
 \item \keyindex{backturn}~$p$ for \hbox to 1.5em{\kern 0.6em\backturn 0\hss},
 \item \keyindex{fermataup}~$p$ puts a \itxem{fermata} at pitch $p$.
No spacing occurs.
 \item \keyindex{fermatadown}~$p$ puts a reverse \ital{fermata} at the same
place.
 \item \keyindex{Fermataup}~$p$ puts a \itxem{fermata} at pitch $p$ centered
above a whole note. No spacing occurs.
 \item \keyindex{Fermatadown}~$p$ puts a reverse \ital{fermata} at the same
place.
 \item A big \itxem{breathing} comma can be put above the staff --- to
indicate where the singer is welcome to breath, or to indicate a short rest
--- using \keyindex{zbreath} (no spacing) or \keyindex{cbreath} (centred in a
\verb|\noteskip| space). The \musictex\ \keyindex{breath} is no more available
since it involved a ``hard'' spacing of the width of that character, which
resulted in troubles with \musixtex.

 \item The \keyindex{caesura} command can also be used to insert a small
slash, such as

\begin{music}
\startextract
\NOTes\zhu j\hl{^e}\caesura\en
\Notes\zcu j\cl e\en
\endextract
\end{music}

 \end{itemize}

 \subsection{Dynamic signs} Various
dynamic signs can be posted with
\keyindex{crescendo}\verb|{|$l$\verb|}| or
\keyindex{decrescendo}\verb|{|$l$\verb|}|, to be uses as arguments to
\verb|\zcharnote|, \verb|\zchar|, \verb|\uptext|, \verb|\zmidstaff|, etc.

Note: The biggest sign is $\simeq$ 68 mm long.

Alternately they can be produced using the pair of \keyindex{icresc} and
\keyindex{tcresc} or \keyindex{tdecresc}. Saying one time \verb|\icresc| you
can force several \verb|\tcresc| or \verb|\tdecresc| with the same starting
point.

\begin{music}
\parindent0pt
\generalmeter{\meterfrac{12}8}
\setstaffs1{2}
\startextract
\Notes\cmidstaff\ppp|\ca c\en
\Notes\icresc|\ca{defgh'abcde}\en
\Notes\zmidstaff{\loff\tcresc}\cmidstaff\fff|\ca{'f}\en
\endextract
\end{music}

 Intensity conventional signs are: \keyindex{ppp},
\keyindex{pppp},
\keyindex{ppp},
\keyindex{pp},
\keyindex{p},
\keyindex{mp},
\keyindex{mf},
\keyindex{f},
\keyindex{fp},
\keyindex{sF},
\keyindex{ff},
\keyindex{fff},
\keyindex{ffff}, resulting in \pppp, \ppp, \pp,
\p,
\mezzopiano,
\mf,
\f,
\fp,
\sF,
\ff,
\fff\ and
\ffff.


 \subsection{Length of note stems}

%\begin{changebar}

Normally, the length of note  stems is the distance of one octave, i.e.
\verb|7\internote|. This is equivalent to 4.66 \keyindex{interbeam}. The
length of the stems may be changed using the macro \keyindex{stemlenght}, e.g.:

  \verb|\stemlength{5.2}|

  \noindent which will set the stemlength to 5.2 \verb|\interbeam|. The default
 is
\keyindex{stemlength}\verb|{4.66}|.

Choral music with four voices is often typeset into two staffs. Thus, each
staff holds two voices, one being typeset with stems up, the other with stems
down. If the command \keyindex{stemcut} has been previously issued, stems are
outside the staff are cut depending on the pitch of the notes. If this is not
wanted, this feature may be suppressed with the command \keyindex{nostemcut}.
The default behaviour is \keyindex{stemcut} in plain \musixtex, and
\keyindex{nostemcut} when {\ttxem{musixcpt.tex}} is invoked.

Normally, down stems never end above the middle line of the staff and up stems
never below that line. This extension of the stems may be inhibited for the
next generated stem using the command \keyindex{stdstemfalse}.  There is no
\keyindex{stdstemtrue} since \keyindex{stdstemfalse} is reset after
generating each new stem.

%\end{changebar}


 \subsection{*Brackets and parentheses}


Several brackets and parentheses have been provided for musical typesetting
needs. These are:
 \begin{itemize}
 \item \keyindex{lpar}\verb|{|$p$\verb|}| and
\keyindex{rpar}\verb|{|$p$\verb|}| which yield small
parenthesis to enclose notes. These are used for \ital{cautionary} accidentals
but more comprehensive macros fulfill that specific purpose (see \ref{cautionary})
 \item \keyindex{bracket}\verb|{|$p$\verb|}{|$n$\verb|}| to post square
brackets of width $n$-internotes at left of a chord. Usually these brackets
are used on keyboard instruments to specify, either two neighbouring notes
played with a single finger, or some chord notes to be played with the
alternate hand.
 \item \keyindex{doublethumb}\verb|{|$p$\verb|}|, to indicate a bracket of
height 2\verb|\internote|.
 \item \keyindex{ovbkt}\verb|{|$p$\verb|}{|$n$\verb|}{|$s$\verb|}| and
\keyindex{unbkt}\verb|{|$p$\verb|}{|$n$\verb|}{|$s$\verb|}|
draw a bracket over the music starting at the current position at pitch $p$,
width $n\times$\verb|noteskip| and slope $s$ (1 $\sim$ 1.125[degree]).
causing no space.
 \item \keyindex{uptrio}\verb|{|$p$\verb|}{|$n$\verb|}{|$s$\verb|}| and
\keyindex{downtrio}\verb|{|$p$\verb|}{|$n$\verb|}{|$s$\verb|}|, which are like
\verb|\ovbkt| but with free definable \keyindex{txt} centers in the middle.

 \item \keyindex{varline} $h$ $\ell$ $s$ builds an oblique line of height $h$ (a
dimension), of length $\ell$ and of slope $s$. Used to build oblique brackets.

This feature is particularly useful for people who want to typeset
\itxem{baroque} music using the ancient \itxem{ornament codings} rather than
the modern equivalents. As a compromise, some macros kindly provided by Ian
{\sc Collier} in Great Britain have slightly been updated and provided.
 \end{itemize}


For example:

\begin{music}
\setstaffs1{2}
\setclef1\bass
\startextract
\NOtes\bracket C8\zq C\qu J\en
\NOtes|\doublethumb g\rq h\qu g\en
\NOtes\lpar c\rpar c\qu c\en
\NOtes\unbkt C15\qu {FH}|\ovbkt n14\ql{kl}\en
\NOtes\downtrio C16\qu {FH}|\uptrio o14\ql{lm}\en
\endextract
\end{music}
\noindent
\begin{quote}\begin{verbatim}
\begin{music}
\setstaffs1{2}
\setclef1{\bass}
\startextract
\NOtes\bracket C8\zq C\qu J\en
\NOtes|\doublethumb g\rq h\qu g\en
\NOtes\lpar c\rpar c\qu c\en
\NOtes\unbkt C15\qu {FH}|\ovbkt n14\ql{kl}\en
\NOtes\downtrio C16\qu {FH}|\uptrio o14\ql{lm}\en
\endextract
\end{music}
\end{verbatim}\end{quote}
\begin{remark} if you used \verb|\input musicext| before, pay attention to the
commands \keyindex{ovbkt} and \keyindex{unbkt}, their parameter meaning has
changed from \musictex{} to \musixtex.
 \end{remark}
 
 \subsection{New line synchronization of coding}
 The procedure named \keyindex{everystaff} is executed each time a new system
is typed. It is normally void, but it can be defined (simply by \verb|\def|%
\keyindex{everystaff}\verb|{...}|) to tell \musixtex\ to post anything
reasonable at the beginning of each system. It was used in the example
{NWIDOR} to post octaviation dashed lines at the end of the piece.

 The procedure named \keyindex{atnextline}, normally void, is executed at the
next computed or forced line break (using
\keyindex{alaligne} or \keyindex{alapage}). More precisely, it is executed
after the break and before the next system is typed. Thus it is fit for
posting new definitions of layout parameters, when no system is
pending\footnote{Its logic is similar to plain \TeX's \keyindex{vadjust}
command.}.

 \index{tenor violin clef}In some scores, tenor parts are not code using the
\ital{bass} clef, but using rather the \ital{violin clef} subscripted by a
{\tt8}. This is not directly supported by the \keyindex{setclef}
command, but it can be handled using \keyindex{everystaff} and
\keyindex{zcharnote}.
As an example the following score

\begin{music}
\instrumentnumber{4}
\setclef1\bass
\def\everystaff{%
  \znotes&\zchar{-6}{\eightrm\kern-2\Interligne8}%
  &\zchar{-6}{\eightrm\kern-2\Interligne8}\en}%
\startextract
\NOTes\ha{HIJK}&\ha{efgh}&\ha{hijk}&\ha{hmlk}\en
\endextract
\end{music}
\noindent was coded as:
\begin{quote}\begin{verbatim}
\instrumentnumber{4}
\setclef1\bass
\def\everystaff{%
  \znotes&\zchar{-6}{\eightrm \kern -2\Interligne 8}%
  &\zchar{-6}{\eightrm \kern -2\Interligne 8}\en}%
\startextract
\NOTes\ha{HIJK}&\ha{efgh}&\ha{hijk}&\ha{hmlk}\en
\endextract
\end{verbatim}\end{quote}
\section{Small and tiny notes}
Before entering details, let us point out that we are presently concerned with
typing notes of smaller size than the normal one, without attempting to change
the interval between the five lines building a single staff. Changing staff
line interval will be treated in a further section.
 \subsection{Cadenzas and explicit ornaments}
 Ornaments and \itxem{cadenzas} usually need to be written using smaller
notes\footnote{This is independent of the staff size.}. This can be done
everywhere by stating \keyindex{smallnotesize} or \keyindex{tinynotesize}.
Normal note size is restored by \keyindex{normalnotesize}.\index{ornaments}

 These macros only have a local scope. Thus, if these macros are invoked
outside the \verb|\notes...\enotes| pair, the change is valid for
the rest of the piece unless explicitely modified but, if they are invoked
inside, their effect is local to the current staff of the current
\verb|\notes...\enotes| pair.
As an example, the following excerpt (beginning
of the Aria of the ``Creation'' by Joseph {\sc Haydn})\index{Haydn, J.@{\sc
Haydn, J.}}

\begin{music}
\instrumentnumber{2}
\generalmeter{\meterfrac44}
\def\qbl#1#2#3{\ibl{#1}{#2}{#3}\qb{#1}{#2}}
\setstaffs2{2}
\setclef1\bass
\setclef2\bass
\startbarno0
\startextract
\NOtes\qp&\zmidstaff{\bf II}\qp|\qu g\en
% mesure 1
\bar
\Notes\itieu2J\wh J&\zw N\ibl0c0\qb0e|\qu j\en
\notes&\qbl0c0|\multnoteskip\tinyvalue\tinynotesize
  \Ibbu1ki2\qb1{kj}\tqh1i\hqsk\en
\Notes&\qb0e\tbl0\qb0c|\qu j\en
\Notes&\ibl0c0\qb0{ece}\tbl0\qb0c|\ql l\sk\ql j\en
% mesure 2
\bar
\Notes\ttie2\wh J&\ql J\sk\ql L|\zqupp g\qbl1e0%
  \zq c\qb1e\zq c\qb1e\zq c\tbl1\zqb1e\en
\notes&|\sk\ccu h\en
\Notes&\ql N\sk\ibl0L{-4}\qbp0L|\ibl1e0\zq c\zqb1e\cu g%
  \zq c\zqb1e\raise\Interligne\ds\zqu g\qb1g\en
\notes&\sk\tbbl0\tbl0\qb0J|\tbl1\zq c\qb1e\en
\endextract
\end{music}
\noindent can be coded as:
\begin{quote}\begin{verbatim}
\instrumentnumber{2}
\generalmeter{\meterfrac44}
\setstaffs2{2}
\setclef2{\bass}
\setclef1{\bass}
\startbarno=0
\startextract
\NOtes\qp&\zmidstaff{\bf II}\qp|\qu g\en
% mesure 1
\bar
\Notes\itieu2J\wh J&\zw N\ibl0c0\qb0e|\qu j\en
\notes&\ibl0c0\qb0c|\multnoteskip\tinyvalue\tinynotesize
  \Ibbu1ki2\qb1{kj}\tqh1i\en
\Notes&\qb0e\tbl0\qb0c|\qu j\en
\Notes&\ibl0c0\qb0{ece}\tbl0\qb0c|\ql l\sk\ql j\en
% mesure 2
\bar\Notes\ttie2\wh J&\ql J\sk\ql L|\zqupp g\qbl1e0%
  \zq c\qb1e\zq c\qb1e\zq c\tbl1\zqb1e\en
\notes&|\sk\ccu h\en
\Notes&\ql N\sk\ibl0L{-4}\qbp0L|\ibl1e0\zq c\zqb1e\cu g%
  \zq c\zqb1e\raise\Interligne\ds\zqu g\qb1g\en
\notes&\sk\tbbl0\tbl0\qb0J|\tbl1\zq c\qb1e\en
\endextract
\end{verbatim}\end{quote}
 \subsection{Grace notes}
 Grace notes are a special case of small and tiny notes: the difference is
that they are always coded as eighth notes with an oblique bar over the flag.
To perform this, special variants of \keyindex{cu} and \keyindex{cl} have been
provided, namely \keyindex{grcu} and \keyindex{grcl}, with the only difference
that the flag has been slashed. Using this together with the note reduction
macro, grace notes (optionally chord grace notes) can be easily coded:

\begin{music}
\startextract
\NOTes\hu h\enotes
\notes\multnoteskip\smallvalue\smallnotesize\grcu j\enotes
\NOTes\hu i\enotes
\bar
\notes\multnoteskip\tinyvalue\tinynotesize\zq h\grcl j\enotes
\NOTEs\wh i\enotes
\endextract
\end{music}
The previous example was coded as:
\begin{quote}\begin{verbatim}
\startextract
\NOTes\hu h\enotes
\notes\multnoteskip\smallvalue\smallnotesize\grcu j\enotes
\NOTes\hu i\enotes
\bar
\notes\multnoteskip\tinyvalue\tinynotesize\zq h\grcl j\enotes
\NOTEs\wh i\enotes
\endextract
\end{verbatim}\end{quote}
 \subsection{Other note shapes}\label{othernotes} The classical note heads
given above --- namely \raise.5ex\hbox{\musixchar7}~~, \raise.5ex
\hbox{\musixchar8}~~ and \raise.5ex\hbox{\musixchar9}~~~
--- can be replaced with less classical note heads, for example to code
special \itxem{violin harmonic notes} or \itxem{percussion music}. See an
example in \ref{abnormalscores}.

 At present time, alternate available note heads can be found in the
extension library, see \ref{diam}, \ref{perc}, \ref{gregnotes} and \ref{litu}.

\section{Staff size} \index{staff size}
 \subsection{Moving from 20pt to 16pt, 24pt or 29pt staff sizes and
conversely}
 You also want to write some parts of your score in 20pt
staff size and others in 16pt or 24pt or 28.8pt staff size, namely
for distinct parts of pieces. Changing the \ixem{general staff size}
is done by saying:

\keyindex{smallmusicsize}, or \keyindex{normalmusicsize}, or
\keyindex{largemusicsize}, or \keyindex{Largemusicsize}.

\noindent respectively.
 \subsection{Changing staff size for certain instruments}\label{staffspacing}
Regardless of the general choice of \verb|\smallmusicsize| or
\verb|\normalmusicsize|, it is now possible to assign certain instruments --
not separate staffs belonging to a same instrument -- to have narrower or larger
\itxem{staff size}, i.e. narrower or larger \itxem{staff spacing}. This is done using

\keyindex{setsize} $n$\verb|{|\ital{size}\verb|}|

where $n$ is the number of the instrument considered. Four different
\ital{sizes} are available as standards: \keyindex{normalvalue}, which is
the default, \keyindex{smallvalue} (0.80 times narrower),
\keyindex{tinyvalue} (0.64 times narrower), \keyindex{largevalue} (1.2 times
larger) and \keyindex{Largevalue} (1.44
times larger). But, if you know perfectly what
you are doing, you can also say:

\verb|\setsize 3{2.0}|

\noindent which will provide the third instrument with staffs of spacing
twice the standard value. In that case, \musixtex\ will use the nearest
symbol size available, but this is likely to be rather ugly.

 An alternate
and equivalent coding --- a remnant from \musictex\ --- could be:

\verb|\def\staffspacingiii{2.0}|\zkeyindex{staffspacing}



\verb|\setsize| must be invoked before the starting command
\verb|\startpiece|, since this statement does not only change the vertical
spacing between staff lines, but it also changes the size of the key,
accidental and note symbols to fit the modified staff line spacing.

 However, it must be emphasized that non-standard staff spacings use the
nearest available font size. This make no serious problem for notes and
accidentals which may be slightly too small or too big, but clefs and rests
may appear to be shifted upwards or downwards. This trouble is progressively
removed, but it requires changing the {\tt musix*} fonts, with some possible
characters forgotten... or the fact that user uses a font older than T.60
version.

As an example, we give two bars of the \ital{Ave Maria} by Charles {\sc
Gounod}\index{Gounod, C.@{\sc Gounod, C.}}, based on the first prelude of
Johann-Sebastian Bach's \ital{Well Tempered Clavier} (transcription for
organ, violin and voice, thanks to Markus {\sc Veittes}):\label{avemaria}

\begin{music}
\def\oct{\advance\transpose by 7}
\def\liftqs#1{\raise#1\Interligne\qs}
\parindent0pt
\sepbarrules
\instrumentnumber{3}
\generalmeter{\meterC}
\setinterinstrument2{3\Interligne}
\setsize3\tinyvalue
\setsize2\tinyvalue
\setclef1\bass
\setstaffs1{2}
\startpiece\addspace\afterruleskip
%Takt 9
\notes\zhl c\liftqs6\qupp e|\ds&\oct
  \itieu5h\hl h&\tx ~~~gra---*\itied4h\hu h\enotes
\notes|\ibbl0j3\qb0h\tqb0l\enotes
\notes|\ibbl1k0\qb1{ohl}\tqb1o\enotes
\notes\zhl c\liftqs6\qupp e|\ds&\oct
  \ttie5\ibl4c0\qb4h&\ttie4\ibu5g{-3}\qb5h\enotes
\notes|\ibbl0j3\qb0h\tqb0l&\oct\qb4a&\tx ---*\tqh5a\enotes
\notes|\ibbl1k0\qb1o\qb1h&\oct\qb4b&\tx ~~ti~-*\cu b\enotes
\notes|\qb1l\tqb1o&\oct\tqb4c&\tx a*\cu c\enotes
\bar
%Takt 10
\notes\zhl c\liftqs6\qupp d|\ds&\oct
  \qlp d&\tx ~~~ple---*\ibsluru4e\qup d\enotes
\notes|\ibbu1g3\bigaccid\qb1{^f}\tqh1h\enotes
\notes|\ibbu2i0\qb2k\qb2f\enotes
\notes|\qb2h\tqh2k&\oct\cl e&\tubslur4f\cu e\enotes
\notes\zhl c\liftqs6\qupp d|\ds&\oct\ql d&\tx na,*\qu d\enotes
\notes|\ibbu1g3\qb1f\tqh1h\enotes
\notes|\ibbu2i0\qb2{kfh}\tqh2k&\qp&\qp\enotes
\endpiece
\end{music}
 This example was coded as:
\begin{quote}\begin{verbatim}
\def\oct{\advance\transpose by 7}
\def\liftqs#1{\raise#1\Interligne\qs}
\parindent0pt
\sepbarrules
\instrumentnumber{3}
\generalmeter{\meterC}
\setinterinstrument2{3\Interligne}
\setsize3\tinyvalue
\setsize2\tinyvalue
\setclef1\bass
\setstaffs1{2}
\startpiece\addspace\afterruleskip
%Takt 9
\notes\zhl c\liftqs6\qupp e|\ds&\oct
  \itieu5h\hl h&\tx ~~~gra---*\itied4h\hu h\enotes
\notes|\ibbl0j3\qb0h\tqb0l\enotes
\notes|\ibbl1k0\qb1{ohl}\tqb1o\enotes
\notes\zhl c\liftqs6\qupp e|\ds&\oct
  \ttie5\ibl4c0\qb4h&\ttie4\ibu5g{-3}\qb5h\enotes
\notes|\ibbl0j3\qb0h\tqb0l&\oct\qb4a&\tx ---*\tqh5a\enotes
\notes|\ibbl1k0\qb1o\qb1h&\oct\qb4b&\tx ~~ti~-*\cu b\enotes
\notes|\qb1l\tqb1o&\oct\tqb4c&\tx a*\cu c\enotes
\bar
%Takt 10
\notes\zhl c\liftqs6\qupp d|\ds&\oct
  \qlp d&\tx ~~~ple---*\ibsluru4e\qup d\enotes
\notes|\ibbu1g3\bigaccid\qb1{^f}\tqh1h\enotes
\notes|\ibbu2i0\qb2k\qb2f\enotes
\notes|\qb2h\tqh2k&\oct\cl e&\curve222\tubslur4f\cu e\enotes
\notes\zhl c\liftqs6\qupp d|\ds&\oct\ql d&\tx na,*\qu d\enotes
\notes|\ibbu1g3\qb1f\tqh1h\enotes
\notes|\ibbu2i0\qb2{kfh}\tqh2k&\qp&\qp\enotes
\endpiece
\end{verbatim}\end{quote}
\section{Layout parameters}
 Most layout parameters are set by \musixtex\ to reasonable default values.
However, sophisticated scores\footnote{To our knowledge, the most complicated
scores are those written for the piano, during the romantic and post-romantic
periods.} may need more place below the lowest staff, between staves, etc.
\def\nochange{(\ital{NOT to be changed})} We give below a short list of the
most significant parameters.
 \subsection{List of layout parameters}
 \begin{remark} the mention ``\nochange'' does not mean that this parameter
cannot be changed, but that it should not be modified directly, e.g.\ by
saying something like \verb|\Interligne=14pt|. In other words, changing these
parameters must be performed using more comprehensive macros which not only
update them but also perform some other compulsory related changes.
 \end{remark}

\begin{description}
 \item[\keyindex{Interligne} :]vertical distance between the base of staff
lines of the current instrument, taking no account of a possible specification
of \keyindex{setsize$n$} \nochange.
 \item[\keyindex{internote} :]the vertical spacing of contiguous notes of
the current instrument, taking account of a possible specification of
\keyindex{setsize$n$} \nochange.
 \item[\keyindex{Internote} :]the vertical spacing of contiguous notes of
the instrument(s) whose \keyindex{setsize$n$} has the \ital{default
value} of one (\keyindex{normalvalue}),
i.e.\ the half of \verb|\Interligne| \nochange

 \item[\keyindex{staffbotmarg} :]margin below the first staff of the lowest
instrument. Changes are recognized at the next system and default is
\verb|3\Interligne|.
 \item[\keyindex{stafftopmarg} :]margin above the upper staff of the upper
instrument. Changes are recognized at the next system and default is
\verb|3\Interligne|.
 \item[\keyindex{interbeam} :]vertical distance between beams. \nochange.
 \item[\keyindex{interportee} :]the distance between the bottom of one staff and
the bottom of the next one. It is set to
\verb|2|\keyindex{interstaff}\verb|\internote| at the next system.
Therefore, trying to change \verb|\interportee| will have no effect.
 %\check
 \item[\keyindex{interinstrument} :]the additional vertical distance between
two different instruments. This means that the distance between the upper
staff of the previous instrument and the lowest line of the current
instrument is equal to \keyindex{interportee+\Bslash interinstrument}. This
value is normally zero, but it helps putting additional space between
distinct instruments for the sake of clarity. This is a general dimension
register which holds for each of the vertical spaces between instruments,
except above the upper one, in which case this interval is irrelevant.
As usual in \TeX, it can be set using a command such as

 \verb|\interinstrument=10pt|

 \noindent or

 \verb|\interinstrument=6\internote|


 However, this general parameter can be overridden for the space above a
specific instrument. For example (see the example {\tt angescao.tex}) one can
state:

\keyindex{setinterinstrument} $n$\verb|{1\Interligne}|

\noindent to force an additional spacing of one \verb|\Interligne|
above instrument $n$, whatever the value of \keyindex{interinstrument}.
 This feature can usefully be used to have more space before instruments
representing \itxem{voices}, in order to have enough place to put
\itxem{lyrics} without assigning these lyrics a zero staff specific instrument
(useful to avoid having too many declared instruments in a choir score).

 The \verb|\setinterinstrument| is identical to the ancient --- and still
working --- \musictex\ command:

 \verb|\def|\keyindex{interinstrumentiii}\verb|{5\interligne}|

 \noindent to add 5\verb|\interligne| above the 3rd instrument.
 %\check


 \item[\keyindex{systemheight} :]the distance from the bottom of the
lowest staff to the top of the highest staff of the upper instrument. This is
the height of the vertical bars (single, double, repeats, etc.) \nochange.
\end{description}
 In addition, when handling notes of a given staff of a given instrument, the
following dimensions are available (note these are not true registers, but
\ital{equivalenced symbols} through a \verb|\def|):
\begin{itemize}
 \item\keyindex{altplancher} : the altitude of the lowest line of the lowest
instrument \nochange.
 \item\keyindex{altitude} : the altitude of the lowest line of the lowest
staff of the current instrument \nochange.
 \item\keyindex{altportee} : the altitude of the lowest line of the current
staff \nochange.

 %??? Next perhaps will change to steps of \verb|\internote|.

 \item\keyindex{stemfactor} : a parameter defining the size of half, quarter
and hooked eighth notes stems. Normally a stem has the length of one octave,
i.e. 3.5\keyindex{Interligne}. However, this is not valid for small size
notes and, therefore, the stem size is related to the \keyindex{interbeam}
dimensions which, in turn, is \ital{normally} equal to 0.75
\keyindex{Interligne}. Thus the normal value of \keyindex{stemfactor} is
4.66, but it can be shortened for any purpose by saying, for example:

 \keyindex{stemlength}\verb|{3.5}|
\end{itemize}
 \subsection{Changing layout parameters}
 Most of these values can be changed, but only between the end of the
previous system and the beginning of the next one. This can be inserted
between a \keyindex{stoppiece} (or a \keyindex{endpiece})
and a \keyindex{contpiece} (or a \keyindex{startpiece}), but it is
wiser to say, for example:

\verb|\def\atnextline{\stafftopmarg=5\Interligne}|

 The user may prefer to change \keyindex{staffbotmarg} or
to feed \keyindex{interstaff} with a
given integer number, but this can be done only between a
\keyindex{stoppiece} (or a \keyindex{endpiece}) and a
\keyindex{contpiece} (or a \keyindex{startpiece}), but it is wiser to use
\keyindex{atnextline} as previously.

 It is also wise to use \keyindex{atnextline} to change the the
number of instruments, the staff spacings, the number of staffs at the next
line... provided that the coding of the notes \ital{resists} an unexpected
line change executing the \keyindex{atnextline}.
 \subsection{Changing the staff distance within systems} The vertical
distance of instruments with more than one staff can be changed, either
outside \verb|\startpiece|...\verb|\endpiece| or using \keyindex{atnextline},
by saying:

\keyindex{interstaff}\verb|{|$n$\verb|}|

 Then the spacing between the staffs of the instruments will be
$n$\verb|\internote|. Note that \verb|\interstaff| applies to all the
instruments, but each distinct instrument may have a different
\verb|\internote| (see \ref{staffspacing}).

 Note that this command is equivalent to an existing remnant of \musictex,
namely:

 \verb|\def|\keyindex{interfacteur}\verb|{|$n$\verb|}|


 \medskip The distance between two different
instruments can be increased by saying

\keyindex{interinstrument}\verb|=|\ital{any \TeX-dimension}

\noindent for all additional inter-instrument distances, or

\keyindex{setinterinstrument} $n$\verb|{|\ital{any \TeX-dimension}\verb|}|

\noindent for single distances.
 \subsection{Changing the number of lines in staffs}\index{staff line number}
\label{stafflinenumber}
Unless explicitely specified, staffs consist of five lines, in accordance to
the normal way of coding music scores. However, exceptions might be
preferred when using \musixtex~:

\begin{itemize}
 \item \itxem{gregorian music} is often written using staff of
four lines instead of five\footnote{German: \ital{Quadratnotation}.},
 \item \itxem{percussion music} (e.g.~drums, triangle) needs one, two, three
 or five lines, since the pitch cannot change but the number of percussion
 instruments.
 \item \itxem{guitar tablature} needs six lines. Although \ital{real} guitar
 players hate guitar tablature,
 for beginners they are a big help. Not ready yet. The lines
 are, but not the additional macros.
\end{itemize}
Therefore \musixtex\ allows for choosing the number
of lines of the staffs of an instrument. This is done by
\keyindex{setlines}~$n$\verb|{|$N$\verb|}| --- where $n$ is the number of the wanted
instrument as usual --- and $N$ the number of lines of the specific staff.
For example:\label{gregorian}

\keyindex{setlines}\verb|2{4}|

will make the instrument number 2 to have staffs of four
lines, that is, fit for gregorian music.
 \subsection{Resetting normal layout parameters}
 Except the general size which
has to be explicitely changed if needed using \keyindex{smallmusicsize},
\keyindex{normalmusicsize}, \keyindex{largemusicsize}, or
\keyindex{Largemusicsize}, all layout registers are reset to \ixem{default
values} by \keyindex{resetlayout}, which are explicitly:

 \begin{itemize}
 \item \keyindex{staffbotmarg} and \keyindex{stafftopmarg} are set to
\verb|3\Interligne|.
 \item \keyindex{interstaff} is set to \verb|9|.
 \item The number of lines of all instruments are reset to 5.
 \item All clef symbols are standard clef symbols.
\end{itemize}
\noindent
Besides, saying \keyindex{begin\LBR music\RBR} invokes \verb|\resetlayout|.
 \subsection{Typesetting one-line excerpts rather than large scores}
Very often, what is wanted is not to typeset a large comprehensive score of
several lines and pages, but an excerpt of one or two bars, preferably
centered such as the various examples of this manual. This can be done simply
by replacing \keyindex{startpiece} with
\keyindex{startextract} and \verb|\endpiece| or \verb|\stoppiece| with
\keyindex{endextract}. It is sometimes useful to get more than one excerpt in
one line, this can be done with redefining of \keyindex{extractline}.

With saying:

\keyindex{let\Bslash extractline\Bslash hbox}

you can put more than one example in one line. Helpful for getting
\itxem{musical footnotes}, which explain the playing of special trills or
give alternative ways of playing, is the redefining to:

\keyindex{let\Bslash extractline\Bslash leftline}

Beside, all changes inbetween
\keyindex{begin\LBR music\RBR}...\keyindex{end\LBR music\RBR} are local,
means not global.

 If you want to terminate it without a bar, you code
\keyindex{zendextract} which acts like \verb|\zstoppiece|.
 \subsection{*Lyrics}\index{lyrics}\label{lyrics}
 While they pose nearly no problem with \musictex\ which works using the glue
facility of \TeX, lyrics raise several serious difficulties with \musixtex.
The reason for that is that lyrics usually consist of \ital{text} which in
turn consists of characters whose width is definitely not stretchable nor
shrinkable proportionally to \verb|\noteskip| or \verb|\elemskip|.

 Thus the width of a sequence of notes like

 \begin{music}
 \startextract
 \NOTEs\zcharnote{-5}{Words }\qu h\en
 \endextract
 \end{music}

 \noindent may be either the width of ``{\tt Words }'' with the current font,
or it may be \verb|1\elemskip|, whatever the largest. In the first case, the
width is fixed (see \keyindex{hardspace}), in the second its width is not the
same at \musixtex's first and second passes. But the unfortunate situation is that
\musixtex\ \ital{must} know whether this feature has a \ital{hard} (not scalable)
or a \ital{scalable} width \ital{at the first pass}, while the inequality
is solved only at the second.

 This means that, in addition to the three pass system, the used must run
trial and errors to find out whether some lyrics are wider that the final note
spacing, or smaller. In that case a wrong decision might lead to questionable
``\verb|Underfull hbox|''-es filled with ugly glue, or it may result un
awful ``\verb|Overfull hbox|'' with its heavy bar punishment and possible
over writings.

 However, before discussing this problem, we first describe the various ways of
inserting lyrics under --- or above --- a staff.

 \subsubsection{Getting enough vertical space for lyrics}   Since songs are
usually equivalent to a one-staff instrument (possibly with several voices)
the recommended solution consists in adjusting the distance between
instruments using either \keyindex{interinstrument}\verb|=|\ital{any
\TeX-dimension} to give more place below all instruments or using
\keyindex{setinterinstrument} to make more space above. Note that {\Bslash
setinterinstrument} defines spacing above and not below and instrument. Since
lyrics are usually set below the staff, the first argument of a
\verb|\setinterinstrument| should be the song instrument number \ital{minus
one}.

 In the case of a single staff tune, or if the song instrument is the first
one, then additional place can be provided using \keyindex{staffbotmarg}.

 \subsubsection{Posting lyrics}
 Lyrics can be introduced in several ways.
 \begin{enumerate}
 \item One archaic solution could be to define a special instrument for the lyrics
text, without effective staff, namely using the command
\keyindex{setstaffs}~$n$\verb|{|$p$\verb|}| described in \ref{whatspecify}.
The inconvenience of this solution is that it increases the number of
instruments, which is limited to 6 in standard \musixtex, although it can be
increased to 9 using {\tt musixadd.tex} and 12 with {\tt musixmad.tex}.

 \medskip
 Therefore, better solutions consist is posting the lyrics in the same
instrument as the tune, provided that inter-instrument spacing has been
adapted.

 \item Another simple obvious solution consists in using the command
\keyindex{zcharnote} to post the text at any position (computed in
\verb|\internote|s) with respect to the lower line of the current staff.
The pitch should be usually negative to have the text below the staff. It
could also be specified like a note pitch, for example ``{\tt a}'' if the song
is in G-clef. The drawback is that the pitch has to be repeated for each text
of each note, which is tideous unless a special macro has been defined.

 \item Rather than \verb|\zcharnote| and other \verb|\?charnote| commands, one
should rather use \keyindex{zchar}, \keyindex{cchar} (centered) or
\keyindex{lchar} (expanded to left) which only allow absolute numbers
(internally multiplied by {\Bslash internote}). These command have the same
drawback as above, namely the vertical position has to be repeated each time.

 \item Of easier use are the commands \keyindex{zsong} (right of the note),
\keyindex{lsong} (left) and \keyindex{csong} (centered) which post the lyrics
at the lower staff line \ital{minus} the previous
\keyindex{interinstrument}~$n$ or the \keyindex{staffbotmarg} quantity. These
commands only have one argument, namely the lyrics text:


\begin{center}
\keyindex{zsong}\verb|{|\ital{text}\verb|}|\quad
\keyindex{lsong}\verb|{|\ital{text}\verb|}|\quad
\keyindex{csong}\verb|{|\ital{text}\verb|}|
\end{center}

 Depending on the values of the inter-instrument spacings and margins, the
resulting vertical position might be inappropriate. Then it can be changed for
any specific $n$-th instrument until further change using

\begin{quote}
\keyindex{setsongraise}~$n$\verb|{|\ital{any \TeX-dimension}\verb|}|
\end{quote}

 \medskip As an example, the following French song

 \begin{music}
 \generalsignature{1}
 \startextract
 \geometricskipscale
 \NOtes\zsong{Au }\qu g\en
 \NOtes\zsong{clair }\qu g\en
 \NOtes\zsong{de }\qu g\en
 \NOtes\zsong{la }\qu h\en
 \bar
 \NOTes\zsong{lu- }\hu i\en
 \NOTes\zsong{ne, }\hu h\en
 \bar
 \NOtes\zsong{mon }\qu g\en
 \NOtes\zsong{a- }\qu i\en
 \NOtes\zsong{mi }\qu h\en
 \NOtes\zsong{Pier- }\qu h\en
 \bar
 \NOTes\zsong{rot, }\wh g\sk\en
 \endextract
 \end{music}

\noindent was coded as:

\begin{quote}\begin{verbatim}
 \generalsignature{1}
 \startextract
 \geometricskipscale
 \NOtes\zsong{Au }\qu g\en
 \NOtes\zsong{clair }\qu g\en
 \NOtes\zsong{de }\qu g\en
 \NOtes\zsong{la }\qu h\en
 \bar
 \NOTes\zsong{lu- }\hu i\en
 \NOTes\zsong{ne, }\hu h\en
 \bar
 \NOtes\zsong{mon }\qu g\en
 \NOtes\zsong{a- }\qu i\en
 \NOtes\zsong{mi }\qu h\en
 \NOtes\zsong{Pier- }\qu h\en
 \bar
 \NOTes\zsong{rot, }\wh g\sk\en
 \endextract
\end{verbatim}\end{quote}


  You can also use the macros from \verb|musixcho.tex|, which result in the
same vertical positionning as \keyindex{zsong} and other \verb|\?song| do, but
the text of the lyrics are better justified around the related note.

 \end{enumerate}

 \subsubsection{Handling lyrics width versus scalable note spacings}

 If one uses either \verb|\zsong| or \verb|\csong| or \verb|\lsong| without
caution, one will probably get awful things such as:

 \begin{music}
 \generalsignature{1}
 \startextract
 \geometricskipscale
 \Notes\zsong{Au }\qu g\en
 \Notes\zsong{clair }\qu g\en
 \Notes\zsong{de }\qu g\en
 \Notes\zsong{la }\qu h\en
 \bar
 \NOtes\zsong{lu- }\hu i\en
 \NOtes\zsong{ne, }\hu h\en
 \bar
 \Notes\zsong{mon }\qu g\en
 \Notes\zsong{a- }\qu i\en
 \Notes\zsong{mi }\qu h\en
 \Notes\zsong{Pier- }\qu h\en
 \bar
 \NOTes\zsong{rot, }\wh g\sk\en
 \endextract
 \end{music}

 \noindent which is the same example as above, with all spacings divided by
1.41. Although locating ``overfull'' lyrics seems easy, it might be wiser to
force their visibility, which is done replacing \verb|\zsong| with
\keyindex{hsong} which encloses the hazardous text in a \verb|\hbox| of width
\verb|\noteskip|, whose overfilling is diagnosed as usual by Plain \TeX\ or
(especially in \LaTeX) by means of the \verb|\overfullrule=...| command:


 \begin{music}
 \generalsignature{1}
 \startextract
 \overfullrule 3pt%
 \geometricskipscale
 \Notes\hsong{Au }\qu g\en
 \Notes\hsong{clair }\qu g\en
 \Notes\hsong{de }\qu g\en
 \Notes\hsong{la }\qu h\en
 \bar
 \NOtes\hsong{lu- }\hu i\en
 \NOtes\hsong{ne, }\hu h\en
 \bar
 \Notes\hsong{mon }\qu g\en
 \Notes\hsong{a- }\qu i\en
 \Notes\hsong{mi }\qu h\en
 \Notes\hsong{Pier- }\qu h\en
 \bar
 \NOTes\hsong{rot, }\wh g\sk\en
 \endextract
 \end{music}

 Alternate versions of \verb|\hsong| are \keyindex{dhsong} which has a fixed
length of \verb|2\noteskip| and \keyindex{thsong} whose fixed length is
\verb|3\noteskip|. These are useful when the text is set below (or above) a
collective coding of two or three notes.

 Once one has diagnosed --- in the tentative final layout --- which lyrics
lead to overfull texts, several corrections may be tried:

\begin{enumerate}
 \item Increase the \keyindex{mulooseness} to have wider note spacing. This
may work, but the inconvenience is that all notes would be stretched, and not
only the faulty notes.
 \item Increase specific note spacings, replacing for example \verb|\Notes|
with \verb|\NOtes| or \verb|\Notesp|. This is the easiest solution which may
require several trials and errors since an increase of a few notes in a system
may lead to a small shrinking of the others, to keep the total length
constant.
 \item Decide that some notes --- only ``some'' notes, not all notes of the
score, neither all the notes of a given system --- would have a \itxem{hard
spacing} and not a scalable spacing. This is done using the command

 \begin{quote}
 \keyindex{hardnote}\ital{ any hard \TeX\ dimension }\verb|\notes|\ital{
normal note specif. }\verb|\en|
 \end{quote}
 \noindent   which ends the \verb|\notes...\en| with a \itxem{hard spacing} (see
\verb|\hardspace| in \ref{hardspace}, p. \pageref{hardspace}) rather than a
scalable spacing.

 A more practical variant has been provided especially for lyrics, namely

 \begin{quote}
 \keyindex{hardlyrics}\ital{ any text }\verb|\notes|\ital{
normal note specif. }\verb|\en|
 \end{quote}
 \noindent which computes the width of ``any text'' by putting it in a
\verb|\hbox| and reverting to \verb|\hardnote| to perform the remainder of the
task. In order to save repetitions, the text of the lyrics which has been used
to compute the hard note spacing can be retrieved under the command name
\keyindex{thelyrics}. \verb|\hardlyrics| must be followed by \verb|\notes|
(with the lyrics text inbetween), not by \verb|\Notes| nor \verb|\NOtes|, etc.


 Besides, since moving the lyrics text between \verb|\hardlyrics| and
\verb|\notes|\footnote{{\Bslash notes}, neither {\Bslash Notes} nor {\Bslash
NOtes} nor {\Bslash NOTes} etc.} together with replacing it with
\keyindex{thelyrics} at the initial location is a rather tedious operation
with text editors, another command has been provided, namely
\keyindex{softlyrics}:

 \verb|\softlyrics{|\ital{ any text }\verb|}|

 \noindent defines \verb|\thelyrics| to be ``\ital{ any text }'', so that
going from \verb|\hardlyrics| to the default scalable behaviour of
\verb|\noteskip| and inversely can easily be done by changing \verb|\hard|
into \verb|\soft| in the source text, with optional change of the number of
uppercase letters in \verb|\notes|.


 
 \medskip\begin{important} since \/\verb|\hardlyrics| computes
\/\verb|\noteskip|, its argument (before \/\verb|\notes|) may not refer to
\/\verb|\noteskip|... which is not already computed.
 \end{important}
 \end{enumerate}

 \subsubsection{A more comprehensive example of lyrics}
 Here is an example taken from the French catholic liturgy (a French
translation of the traditional \ital{Gloria in excelsis Deo}). We give first
the adapted source of a part of the score:


\begin{quote}\begin{verbatim}
\overfullrule 3pt
\instrumentnumber{1}
\setstaffs11
%
\generalsignature{-1}\relax % one flat
\generalmeter{\meterfrac{2}{2}}
%
\staffbotmarg=5\Interligne\stafftopmarg=1.5\Interligne
\startpiece
\setsongraise1{2\Interligne}%
\znotes\uptext{\kern -9mm\raise 9pt\hbox{\bigtype
  Majestueux, sans tra\^\i ner \rm(\metron{\hu}{50})}}\enotes
\hardlyrics {\kern-5pt Gloire }\notes\hsong{\thelyrics }\cu c\enotes
\notes\hsong{\`a }\cu c\enotes
\barre
\NOTes\hsong{Dieu~}\hu f\enotes
\notes\hsong{au}\cu f\enotes
\hardlyrics{plus~}\notes\hsong{\thelyrics }\cu f\enotes
\hardlyrics{haut~}\notes\hsong{\thelyrics }\cu g\enotes
\notes\hsong{des}\cu g\enotes
\barre
\NOtes\hsong{cieux~}\qup h\enotes
\notes\hsong{et~}\cu h\enotes
\hardlyrics{paix~}\notes\hsong{\thelyrics }\qu i\enotes
\hardlyrics{sur~}\notes\hsong{\thelyrics }\cu h\enotes
\notes\hsong{la~}\cu g\enotes
\barre
\Notes\hsong{ter-}\qu f\enotes
\notes\hsong{re~}\cu f\enotes
\hardlyrics{aux~}\notes\hsong{\thelyrics}\cu f\enotes
\hardlyrics{hom- }\notes\hsong{\thelyrics}\qu g\enotes
\hardlyrics{mes~}\notes\hsong{\thelyrics }\cu h\enotes
\hardlyrics{qu'il~}\notes\hsong{\thelyrics }\cu i\enotes
\barre
\NOtes\hsong{ai-}\hu g\enotes
\Notes\hsong{me.}\hu f\enotes
\Notes\uptext{\bf II }\enotes
\barre
\hardlyrics{Nous~}\notes\hsong{\thelyrics}\qu h\enotes
\notes\hsong{Te~}\cu g\enotes
\notes\hsong{lou-}\cu g\enotes
\NOtes\hsong{ons,}\hu h\enotes
\barre
\hardlyrics{nous~}\notes\hsong{\thelyrics }\cu h\enotes
\notes\hsong{Te~}\cu h\enotes
\notes\hsong{b\'e-}\cu j\enotes
\notes\hsong{nis-}\cu j\enotes
\NOtes\hsong{sons,}\hu h\enotes
\barre
\Notes\hsong{nous~}\qu h\enotes
\NOtes\hsong{t'a-}\hu g\enotes
\Notes\hsong{do-}\qu f\enotes
\barre
\NOtes\hsong{rons,~}\hu f\enotes
\notes\uptext{\bf I}\enotes
\hardlyrics{nous~}\notes\hsong{\thelyrics }\cu h\enotes
\notes\hsong{Te~}\cu h\enotes
\notes\hsong{glo-}\cu g\enotes
\notes\hsong{ri-}\cu g\enotes
\barre
\NOTEs\hsong{fions,~}\hu h\enotes
\hardlyrics{\kern -4pt nous~}\notes\hsong\thelyrics\cu h\enotes
\notes\hsong{Te~}\cu h\enotes
\notes\hsong{ren-}\cu h\enotes
\notes\zsong{dons~}\cu i\enotes
\barre
\NOtes\hsong{gr\^a~-}\qu g\enotes
\notes\hsong{ces~}\cu g\enotes
\hardlyrics{pour~}\notes\hsong\thelyrics\cu g\enotes
\hardlyrics{Ton~}\notes\hsong\thelyrics\cu h\enotes
\notes\hsong{im-}\cu i\enotes
\hardlyrics{men-}\notes\hsong\thelyrics\cu j\enotes
\notes\zsong{se~}\cu k\enotes
\barre
\Notes\hsong{gloi-}\ql j\enotes
\Notes\hsong{-}\ql i\enotes
\Notes\hsong{re~!}\qu h\enotes
\notes\uptext{\bf II}\enotes
\notes\hardlyrics{Sei-}\hsong\thelyrics\cu h\enotes
\notes\zsong{gneur~}\cu i\enotes
\barre
\hardlyrics{Dieu,~}\notes\hsong\thelyrics\qu j\enotes
\hardlyrics{Roi~}\notes\hsong\thelyrics\cu h\enotes
\notes\hsong{du~}\cu g\enotes
\Notes\hsong{Ciel,~}\qu h\enotes
\hardlyrics{Dieu~}\notes\hsong\thelyrics\cu h\enotes
\notes\zsong{le~}\cu g\enotes
\barre
\hardlyrics{P\`e-~}\notes\thelyrics\hsong\cu h\enotes
\notes\hsong{re~}\cu i\enotes
\hardlyrics{tout-}\notes\hsong\thelyrics\cu g\enotes
\hardlyrics{puis-}\notes\hsong\thelyrics\cu h\enotes
\hardlyrics{sant~!}\notes\hsong\thelyrics\qup h\enotes
\notes\uptext{\bf I}\enotes
\notes\zsong{Sei-}\cu h\enotes
\mulooseness 2%
\stoppiece
\end{verbatim}\end{quote}

 The result clearly shows the inequality between note spacings,
some of them forced by lyrics length, some others related to the
value of \verb|\elemskip| choosen by {\tt musixflx} according to the
given value of \keyindex{mulooseness}. Note that \verb|\zsong| still has been
used for lyrics followed by a bar, since their extension across the bar is
usually harmless.

\begin{music}
\small
\overfullrule 3pt
\instrumentnumber{1}
\setstaffs11
%
\generalsignature{-1}\relax % one flat
\generalmeter{\meterfrac{2}{2}}
%
\staffbotmarg=5\Interligne\stafftopmarg=1.5\Interligne
\startpiece
\setsongraise1{2\Interligne}%
\znotes\uptext{\kern -9mm\raise 9pt\hbox{\bigtype
  Majestueux, sans tra\^\i ner \rm(\metron{\hu}{50})}}\enotes
\hardlyrics {\kern-5pt Gloire }\notes\hsong{\thelyrics }\cu c\enotes
\notes\hsong{\`a }\cu c\enotes
\barre
\NOTes\hsong{Dieu~}\hu f\enotes
\notes\hsong{au}\cu f\enotes
\hardlyrics{plus~}\notes\hsong{\thelyrics }\cu f\enotes
\hardlyrics{haut~}\notes\hsong{\thelyrics }\cu g\enotes
\notes\hsong{des}\cu g\enotes
\barre
\NOtes\hsong{cieux~}\qup h\enotes
\notes\hsong{et~}\cu h\enotes
\hardlyrics{paix~}\notes\hsong{\thelyrics }\qu i\enotes
\hardlyrics{sur~}\notes\hsong{\thelyrics }\cu h\enotes
\notes\hsong{la~}\cu g\enotes
\barre
\Notes\hsong{ter-}\qu f\enotes
\notes\hsong{re~}\cu f\enotes
\hardlyrics{aux~}\notes\hsong{\thelyrics}\cu f\enotes
\hardlyrics{hom- }\notes\hsong{\thelyrics}\qu g\enotes
\hardlyrics{mes~}\notes\hsong{\thelyrics }\cu h\enotes
\hardlyrics{qu'il~}\notes\hsong{\thelyrics }\cu i\enotes
\barre
\NOtes\hsong{ai-}\hu g\enotes
\Notes\hsong{me.}\hu f\enotes
\Notes\uptext{\bf II }\enotes
\barre
\hardlyrics{Nous~}\notes\hsong{\thelyrics}\qu h\enotes
\notes\hsong{Te~}\cu g\enotes
\notes\hsong{lou-}\cu g\enotes
\NOtes\hsong{ons,}\hu h\enotes
\barre
\hardlyrics{nous~}\notes\hsong{\thelyrics }\cu h\enotes
\notes\hsong{Te~}\cu h\enotes
\notes\hsong{b\'e-}\cu j\enotes
\notes\hsong{nis-}\cu j\enotes
\NOtes\hsong{sons,}\hu h\enotes
\barre
\Notes\hsong{nous~}\qu h\enotes
\NOtes\hsong{t'a-}\hu g\enotes
\Notes\hsong{do-}\qu f\enotes
\barre
\NOtes\hsong{rons,~}\hu f\enotes
\notes\uptext{\bf I}\enotes
\hardlyrics{nous~}\notes\hsong{\thelyrics }\cu h\enotes
\notes\hsong{Te~}\cu h\enotes
\notes\hsong{glo-}\cu g\enotes
\notes\hsong{ri-}\cu g\enotes
\barre
\NOTEs\hsong{fions,~}\hu h\enotes
\hardlyrics{\kern -4pt nous~}\notes\hsong\thelyrics\cu h\enotes
\notes\hsong{Te~}\cu h\enotes
\notes\hsong{ren-}\cu h\enotes
\notes\zsong{dons~}\cu i\enotes
\barre
\NOtes\hsong{gr\^a~-}\qu g\enotes
\notes\hsong{ces~}\cu g\enotes
\hardlyrics{pour~}\notes\hsong\thelyrics\cu g\enotes
\hardlyrics{Ton~}\notes\hsong\thelyrics\cu h\enotes
\notes\hsong{im-}\cu i\enotes
\hardlyrics{men-}\notes\hsong\thelyrics\cu j\enotes
\notes\zsong{se~}\cu k\enotes
\barre
\Notes\hsong{gloi-}\ql j\enotes
\Notes\hsong{-}\ql i\enotes
\Notes\hsong{re~!}\qu h\enotes
\notes\uptext{\bf II}\enotes
\hardlyrics{Sei-}\notes\hsong\thelyrics\cu h\enotes
\notes\zsong{gneur~}\cu i\enotes
\barre
\hardlyrics{Dieu,~}\notes\hsong\thelyrics\qu j\enotes
\hardlyrics{Roi~}\notes\hsong\thelyrics\cu h\enotes
\notes\hsong{du~}\cu g\enotes
\hardlyrics{Ciel,~}\notes\hsong\thelyrics\qu h\enotes
\hardlyrics{Dieu~}\notes\hsong\thelyrics\cu h\enotes
\notes\zsong{le~}\cu g\enotes
\barre
\hardlyrics{P\`e-~}\notes\hsong\thelyrics\cu h\enotes
\notes\hsong{re~}\cu i\enotes
\hardlyrics{tout-}\notes\hsong\thelyrics\cu g\enotes
\hardlyrics{puis-}\notes\hsong\thelyrics\cu h\enotes
\hardlyrics{sant~!}\notes\hsong\thelyrics\qup h\enotes
\notes\uptext{\bf I}\enotes
\notes\zsong{Sei-}\cu h\enotes
\mulooseness 2%
\stoppiece
\end{music}


 The complete score of this carol --- with slightly different layout
due to different page size --- is given in example {\tt glorias.tex} and in
{\tt gloriab.tex}, the latter exhibiting not only the song tune but also the
organ accompaniment
(both require {\tt musixsty.tex}).


\section{Abnormal music coding}
 \subsection{Gregorian chant: staffs and clefs} \index{gregorian
music}Gregorian chant is often coded using four line staffs (see sections
\ref{gregorian} and \ref{stafflinenumber}) and using special notes (called
\itxem{neumes}) which are described in section \ref{gregnotes}. But the
gregorian chant also needs special clefs which are in fact the ancestors of
the modern ones. The \itxem{gregorian clefs} can be invoked instead of the
modern ones by:

\keyindex{setaltoclefsymbol}\verb|3\gregorianCclef|

\keyindex{setbassclefsymbol}\verb|3\gregorianFclef|

\noindent will cause the instrument number 3 to exhibit the chosen gregorian
clefs. The standard clefs can be restored for every instrument with
\keyindex{resetclefsymbols}.

It is to be emphasized that, since version T.40 of \musixtex, one should
specify whether one wants to change the bass clef symbol or the alto clef
symbol (also the treble clef symbol, but there is no treble clef in gregorian
chant). The reason is that \musixtex\ (as well as \musictex) selects and
raises differently the F, G and C clefs according to the arguments of the
\keyindex{setclef} command. Therefore, is one had substituted any F clef
symbol while saying \verb|\setclef1{1000}|, then an F clef would duly appear
on the staff, but it would have been set at the position of an alto clef, thus
seriously misleading the musician.

 However, for compatibility with what was previously choosen\footnote{By A.
{\sc Egler}...}, the \keyindex{setclefsymbol} still exists, but it substitutes
the given second argument \ital{to all clef symbols} of that instrument,
regardless of the actual musical meaning of this symbol. \verb|\setclefsymbol|
is therefore discouraged, unless one changes the design of the clef symbol of
an instrument for the whole of the score.

 As an example, the same gregorian scale has been written with a gregorian C
clef on all four lines of the staff:

 \begin{music}
 \parindent 19mm
 \instrumentnumber{4}
 \setname1{1st line} \setname2{2nd line} \setname3{3rd line} \setname4{4th line}
 \setlines1{4}\setlines2{4}\setlines3{4}\setlines4{4}
 \sepbarrules
 \generalmeter{\empty}
 \setclef1{1000} \setclef2{2000} \setclef3{3000} \setclef4{4000}
 \setaltoclefsymbol1\gregorianCclef
 \setaltoclefsymbol2\gregorianCclef
 \setaltoclefsymbol3\gregorianCclef
 \setaltoclefsymbol4\gregorianCclef
\startextract
\Notes\squ{abcdefghi}&\squ{abcdefghi}&\squ{abcdefghi}&\squ{abcdefghi}&\enotes
\endextract
\end{music}

 The coding was:
 \begin{verbatim}
 \instrumentnumber{4}
 \setname1{1st line} \setname2{2nd line} \setname3{3rd line} \setname4{4th line}
 \setlines1{4}\setlines2{4}\setlines3{4}\setlines4{4}
 \sepbarrules
 \generalmeter{\empty}
 \setclef1{1000} \setclef2{2000} \setclef3{3000} \setclef4{4000}
 \setaltoclefsymbol1\gregorianCclef
 \setaltoclefsymbol2\gregorianCclef
 \setaltoclefsymbol3\gregorianCclef
 \setaltoclefsymbol4\gregorianCclef
\startextract
\Notes\squ{abcdefghi}&\squ{abcdefghi}&\squ{abcdefghi}&\squ{abcdefghi}&\enotes
\endextract
 \end{verbatim}


 \subsection{Music score without clefs or with special clefs}\index{clefs
(empty)} Regardless of the number of lines of the staffs, an instrument may
have no clefs, e.g.~for \itxem{percussion music} but also for any weird
purpose. This is done by declaring the following item:

\keyindex{setclefsymbol}~$n$\verb|\empty|

\noindent Normal symbols for these clefs can be restored by:

\keyindex{resetclefsymbols}

 Besides, a special \itxem{drum clef} (two heavy vertical bars) can
replace for the $n$-th intrument any of the standard clefs by saying:

\keyindex{setclefsymbol}~$n$\keyindex{drumclef}\label{sectiondrum}

\noindent However, since the vertical position of the clef depends on the
previously stated clef, it is not wise to replace any clef symbol with the
drum clef, but to have the instrument previously configured with the default
violin clef, i.e. \verb|{0000}|.

 It is to be emphasised that these features are specific to one
instrument --- not one staff of a several staff instrument --- so that some
weird score for \ital{monks}, \ital{drum} and \ital{electronic keyboard}
such as

\begin{music}
\parindent 19mm
\instrumentnumber{3}
\setname1{keyboard} \setname2{drum} \setname3{monks}
\setlines2{1}
\setlines3{4}
\setinterinstrument1{-2\Interligne}% less vertical space above
\setinterinstrument2{-2\Interligne}% and below the percussion
\sepbarrules
\setsign1{-1} % one flat at keyboard
\generalmeter{\meterfrac24}
\setmeter3\empty
\setclef3\alto
\setclef1\bass
\setstaffs12 % 2 staffs at keyboard
\setclefsymbol3\gregorianCclef % gregorian C clef at instrument 3
\setclefsymbol2\drumclef       % cancel G clef at instrument 2
\startextract
\Notes\hu F|\zh c\hu h&\dnq4&\squ{acd}\enotes\bar
\NOtes\qu I|\zq N\qu d&\qp&\diapunc f\enotes
\NOtes\qu J|\zq a\qu e&\ynq4&\diapunc e\enotes\bar
\notes\hu G|\zh b\hu d&\dnq4&\zsqu d\rsqu g\squ{hgh}\enotes
\endextract
\end{music}
\noindent could be coded as follows, regardless this is relevant (see remark
in \ref{gregoriancappella}, p. \pageref{gregoriancappella}):
\begin{verbatim}
\parindent 19mm
\instrumentnumber{3}
\setname1{keyboard} \setname2{drum} \setname3{monks}
\setlines2{1}
\setlines3{4}
\setinterinstrument1{-2\Interligne}% less vertical space above
\setinterinstrument2{-2\Interligne}% and below the percussion
\sepbarrules
\setsign1{-1} % one flat at keyboard
\generalmeter{\meterfrac24}
\setmeter3{\empty}
\setclef3{\alto}
\setclef1{\bass}
\setstaffs1{2} % 2 staffs at keyboard
\setclefsymbol3{\gregorianCclef} % gregorian C clef at instrument 3
\setclefsymbol2{\drumclef}       % cancel G clef at instrument 2
\startextract
\Notes\hu F|\zh c\hu h&\dnq4&\squ{acd}\enotes\bar
\NOtes\qu I|\zq N\qu d&\qp&\diapunc f\enotes
\NOtes\qu J|\zq a\qu e&\ynq4&\diapunc f\enotes\bar
\notes\hu G|\zh b\hu d&\dnq4&\zsqu d\rsqu g\squ{hgh}\enotes
\end{verbatim}
In the same way, a possible violin score with \itxem{harmonic notes} (see
\ref{othernotes}) could be:\label{abnormalscores}

\begin{music}
\parindent0pt
\generalsignature{-2}
\generalmeter\allabreve
\startextract
\NOTes\dzq o\zh d\hu h\enotes
\Notes\ibu0k0\zq g\yqb0k\qb0j\zq e\yqb0i\tbu0\qb0j\enotes
\bar
\NOTes\dzq g\hu k\enotes
\NOTes\hpause\enotes
\bar
\NOTes\dzq o\zh d\hl h\enotes
\Notes\ibl0e0\zq g\yqb0k\qb0j\zq e\yqb0i\tbl0\qb0j\enotes
\bar
\NOTes\dzq g\hu k\enotes
\NOTes\hpause\enotes
\endextract
\end{music}
It was coded as follows:
\begin{quote}\begin{verbatim}
\generalsignature{-2}
\generalmeter\allabreve
\startextract
\NOTes\dzq o\zh d\hu h\enotes
\Notes\ibu0k0\zq g\yqb0k\qb0j\zq e\yqb0i\tbu0\qb0j\enotes
\bar
\NOTes\dzq g\hu k\enotes
\NOTes\hpause\enotes
\bar
\NOTes\dzq o\zh d\hl h\enotes
\Notes\ibl0e0\zq g\yqb0k\qb0j\zq e\yqb0i\tbl0\qb0j\enotes
\bar
\NOTes\dzq g\hu k\enotes
\NOTes\hpause\enotes
\endextract
\end{verbatim}\end{quote}
 \subsection{Usual percussion music}
Besides single percussion scores usually
written using one-line staffs, percussion music involving several instruments
is often writen on five-line staffs with a \ital{drum clef}, where the
instruments are distinguished by the type of the note heads and the apparent
pitch of the note on the staff. We give an example --- kindly provided by
Agusti {\sc Mart\'in Domingo}:

\medskip
\begin{music}
\generalmeter{\meterfrac44}
\setclefsymbol1\drumclef
\parindent0pt\startpiece
\leftrepeat
\Notes\zql f\rlap\soupir\ibu0m0\xqb0{nn}\enotes
\Notes\kzq d\zql f\zq j\xqb0n\tbu0\xqb0n\enotes
\Notes\zql f\rlap\soupir\ibu0m0\xqb0{nn}\enotes
\Notes\kzq d\zql f\zq j\xqb0n\tbu0\xqb0n\enotes
\bar
\Notes\zql f\rlap\soupir\ibu0m0\kqb0{nn}\enotes
\Notes\xzq d\zql f\zq j\kqb0n\tbu0\kqb0n\enotes
\Notes\zql f\rlap\soupir\ibu0m0\kqb0{nn}\enotes
\Notes\xzq d\zql f\zq j\kqb0n\tbu0\kqb0n\enotes
\bar
\Notes\zql f\rlap\soupir\ibu0m0\oxqb0{nn}\enotes
\Notes\oxzq d\zql f\zq j\kqb0n\tbu0\oxqb0n\enotes
\Notes\zql f\rlap\soupir\ibu0m0\oxqb0{nn}\enotes
\Notes\oxzq d\zql f\zq j\kqb0n\tbu0\oxqb0n\enotes
\setrightrepeat\endpiece
\end{music}
 Its coding was:
 \begin{quote}\begin{verbatim}
\begin{music}
\instrumentnumber{1}
\generalmeter{\meterfrac44}
\setclefsymbol1\drumclef
\parindent0pt\startpiece
\leftrepeat
\Notes\zql f\rlap\soupir\ibu0m0\xqb0{nn}\enotes
\Notes\kzq d\zql f\zq j\xqb0n\tbu0\xqb0n\enotes
\Notes\zql f\rlap\soupir\ibu0m0\xqb0{nn}\enotes
\Notes\kzq d\zql f\zq j\xqb0n\tbu0\xqb0n\enotes
\bar
\Notes\zql f\rlap\soupir\ibu0m0\kqb0{nn}\enotes
\Notes\xzq d\zql f\zq j\kqb0n\tbu0\kqb0n\enotes
\Notes\zql f\rlap\soupir\ibu0m0\kqb0{nn}\enotes
\Notes\xzq d\zql f\zq j\kqb0n\tbu0\kqb0n\enotes
\bar
\Notes\zql f\rlap\soupir\ibu0m0\oxqb0{nn}\enotes
\Notes\oxzq d\zql f\zq j\kqb0n\tbu0\oxqb0n\enotes
\Notes\zql f\rlap\soupir\ibu0m0\oxqb0{nn}\enotes
\Notes\oxzq d\zql f\zq j\kqb0n\tbu0\oxqb0n\enotes
\setrightrepeat\endpiece
\end{music}
 \end{verbatim}\end{quote}
 To use these different note heads, one must
 \begin{itemize}
 \item either include a specific percussion file namely\index{percussion
music} \ttxem{musixper.tex} after the usual \verb|\input musixtex|;
 \item use special macro names to replace the usual elliptic black note head
with other available note heads. Today only the most used note types are
supported.
 \end{itemize}


\section{Writing your own macros: the {\Bslash catcode} problems}
As seen before, the \keyindex{catcodes} of the \| and \verb|&| symbols
are modified by \musixtex, in the range of the actual scores but not
in the whole of the \TeX\ source.
Thus, if you define your own macros to make
your writing easier, you are likely to invoke the \| or \verb|&|
symbols in a part of text where their \keyindex{catcode}s are not correctly set.
\index{"|@{\tt\char'174}}
This may result typically in a diagnostic like:

\verb|! Misplaced alignment tab character &.|

\noindent when you attempt, not to define, but to use your macro using the
\verb|&| symbol to change the instrument. Smart \TeX ers know that the
\keyindex{catcode}s are attached to the characters \ital{when they are input}
and not when they are used; thus you must be sure that \| and \verb|&|
have the correct \musixtex\ \keyindex{catcode} when the macro is defined,
which may well occur outside the actual score.

It is also worth pointing out that the same problem may occur with other
punctuation marks like ``\verb|<|'', ``\verb|>|'', ``\verb|^|,
etc., if their \keyindex{catcode} has been changed by some other set of
macros, like \ttxem{french.sty}.

\section{\LaTeX~and \musixtex}
 \subsection{The {\tt musixtex.sty} style}\label{musixltx}
 As said before, the amount of memory and registers used by \musixtex\ makes
it hardly compatible with \LaTeX. However, Nicolas {\sc
Brouard}\index{Brouard, N.@{\sc Brouard, N.}} succeeded in building a
\ttxem{musixltx.tex} which is now included in the distribution. This is
not recommended to make separate music scores. Its purpose is rather to
provide a means of inserting short musical excerpts in books or articles
written with \LaTeX. Then, the \keyindex{documentstyle} command should
include {\tt musixtex} in the options.

The \LaTeX\ \index{LaTeX@\LaTeX}style file \ttxem{musixtex.sty}
simply \verb|\input|s the following files (in that very order):
\begin{itemize}
 \item \verb|musixtex.tex|
 \item \verb|musixltx.tex|
\end{itemize}
 In case of \verb|TeX capacity exceeded...|, use a ``Bigla\TeX'' (after
checking there is no visible error in the source
code).\index{BigLaTeX@Big\LaTeX}
 \subsection{Wide music in \LaTeX}\label{musixblx}
 Another difficulty appears with \LaTeX: internal \LaTeX\ macros handle the
page size in a way which is not supposed to be changed within a given document.
This means that text horizontal and vertical sizes are somewhat frozen so that
one can hardly insert pieces of music of page size different from the size
specified by the LaTeX \itxem{style}.
Although a \ttxem{musixblx.tex} has been provided, which makes the
\ital{environment} \verb|bigmusic| available.
\zkeyindex{begin\LBR bigmusic\RBR}
The main drawback is an unpredictable behaviour of top and bottom
printouts, especially page numberings.

 If the whole of a document has wide pages, it can be handled with the
\ttxem{a4wide} style option, or any derivate of it.
 \subsection{The {\Bslash catcode} problems}
 The \verb|musixltx.tex| file
merely overrides the \keyindex{catcode}s of the \| and \verb|&| symbols
which are modified by \musixtex. To have access to these symbols when coding
music, you should enclose the scores or excerpts within
\verb|\begin{music}| and \verb|\end{music}|. But there is also another
possibility, i.e.\ to say \keyindex{nextinstrument} instead of \verb|&|
index{\&} and \keyindex{nextstaff} instead of \|.
\index{"|@{\tt\char'174}}

 Another problem comes from the {\tt\ixem{french.sty}} written by Bernard
{\sc Gaulle}\index{Gaulle, B.@{\sc Gaulle, B.}} which is the standard of the
\ixem{GUTenberg} French association. This style changes many
\keyindex{catcode}s which lead \musixtex\ to fail in many cases. Therefore
the \keyindex{catcode}s of all are forced to the adequate value at
\keyindex{startpiece}, \keyindex{startextract} and restored at their original
value at \keyindex{endpiece}, \keyindex{stoppiece} and \keyindex{endextract}.
This means that some facilities like the \itxem{guillemets} or the
\itxem{tabulation} character are inhibited within music scores (possible
problem with sophisticated \itxem{lyrics}) but perfectly available within the
normal text.

 Anyway, in case of emergency, one can invoke \keyindex{catcodesmusic} to
establish the \keyindex{catcode}s at their value fit for music, and
\keyindex{endcatcodesmusic} to reset them at their external value, for example
those chosen by \verb|french.sty|.

\section{Implementation and restrictions}

 The macroinstruction file \musixtex\ contains approximately 3200 lines of
code, that is 98~000 bytes approximately. This requires your score to be
compiled by the most extended versions of \TeX\ (65~000 words of working
memory). It is therefore wise to say \verb|\tracingsstats=2| in
order to have an information about the memory used in each page. In desperate
situations, we recommend using the ``Big\TeX'' processors which,
unfortunately, perform a great deal of disk input/outputs (on PCs with i286
processors) which make them awfully slow\footnote{Using i386 or i486
processors, this problem disappears with the specific version of
{\tt emTeX}}.\index{BigTeX@Big\TeX}\index{emTeX@em\TeX}

In particular, the number of registers it uses and the amount of memory used
by \LaTeX\ macros makes it doubtfully compatible with \LaTeX, unless using
Big\LaTeX.\index{BigLaTeX@Big\LaTeX}

Other precautions are necessary: beware of end-of-line spaces; they corrupt
layout and cause {\tt underfull/overfull hbox} warnings during third pass.
To avoid that, it is recommended
to use \verb|%| at the end of source lines.


%\subsection{ABC2MTeX}
% Generally: yes
%\subsection{MIDI2TeX}
% s.a.a. (I already use a modified one, Thanx to C)
%\subsection{SceX}
% next time

\section{From \musictex~to \musixtex: {\tt musixcpt}}
\label{compatibility}

This file is intended to run `{\bf old}' input files with as less changes
(read \verb|musicdoc| {\bf and} \musixtex's laws~!) as possible. It slows
down the speed and makes it impossible to use some\footnote{This was the will
of one of the authors (A.E.) but we (we=D.T.) are now tending to remove any
incompatibilities of {\tt musixcpt} with plain \musixtex.} of \musixtex\
commands.

 To run \musictex\ examples --- not withstanding restrictions related to
glue and ``hard'' spacings forbidden with
\musixtex\ --- just replace all previous \verb|\input music*| by:

 \verb|\input musixtex|

 \verb|\input musixcpt|

\noindent and, optionally

 \verb|\input musixsty|

\subsection{Compatibility restrictions}

The \ttxem{musixcpt.tex} file holds up
compatibility to \musictex's sources, but there are some restrictions, which
are caused either by missing glue in \musixtex\ --- sometimes ugly, but
generally harmless --- or by some hard spacings such as \verb|\hbox|es
containing lyrics exceeding the \keyindex{noteskip} dimension, and resulting
in ``overfull hbox[es]'' that is, notes and symbols outside the score limits,
with the heavy vertical bar as a standard \TeX\ punishment.

The easiest way to avoid this consists in ending systematically
\ital{all}\footnote{ALL lines, not ``most of them''.} input
lines between \keyindex{startpiece}...\keyindex{stoppiece}\footnote{or
\keyindex{Stoppiece} or \keyindex{endpiece} or \keyindex{Endpiece}.}
with a comment sign\footnote{For \TeX perts: every line
which does not end with a command}, namely a ``\verb|%|''.

\medskip Besides, one might want to have a unique source file to be compiled
with both the \musictex\ format and the \musixtex\ format, and\footnote{This
might be considered as an excessive requirement, but we (D.T.) think it is a
good way of including \musixtex's new facilities...} taking advantage of some
specific possibilities of \musixtex. The leads to a need of testing whether
the source file is compiled with one format or the other. In fact this test is
easy:\zkeyindex{mxversion}

\verb|\ifx\mxversion\undefined|

\ \ \ the specific \musictex\ code

\verb|\else|

\ \ \ the specific \musixtex\ code, taking advantage of new features

\verb|\fi|

\medskip Several examples are now included in \musictex's examples, for
example {\tt pacifiqn.tex}. Of course this would fail if the user
inadvertently decided to define the command {\Bslash mxversion} in his source
text.
 %\check

\subsection{Additional commands in {\tt musixcpt.tex}}

The rentative user looking in given examples might find commands not described
in the \musixtex\ manual (this one). Most frequent are (in case of missing
description, revert to \musictex's manual, namely {\tt musicdoc.tex}, {\tt
musicdoc.dvi}, {\tt musicdoc.ps}, {musicdoc.lj}, etc.):

\begin{itemize}
 \item\keyindex{qh} : same as \verb|\qb|, but was different with \musictex,
since it distinguished notes hanging above (\verb|\qb|) and below (\verb|\qh|)
the beam(s).
 \item\keyindex{debutmorceau} : nearly but not exactly  the same as
\verb|\startpiece|.
 \item\keyindex{suspmorceau} : suspends the score at the end of the line, in
order to permit inserting ordinary \TeX\ commands. Similar to
\keyindex{stoppiece} but performs line counting necessary then using
\musictex's \verb|\autolines| feature.
 \item \keyindex{reprmorceau} is synonym of \verb|\contpiece|.
 \item \keyindex{lreprmorceau} is synonym of \verb|\contpiece|.
 \item \keyindex{preprmorceau} ejects a newpage and performs \verb|\contpiece|.
 \item \keyindex{finmorceau} is synonym of \verb|\Stoppiece|, i.e. with heavy
ending double bar..

 \item\keyindex{barre} : same as \verb|\bar|.
 \item\keyindex{dsoupir} : same as \verb|\ds|.
 \item\keyindex{qsoupir} : same as \verb|\qs|.
 \item\keyindex{demisoupir} : same as \verb|\ds|.
 \item\keyindex{temps} : was glue in \musictex, now equivalent to
\verb|\empty|.
 \item\keyindex{autolines} is fit for scores with
bars of regular length: after \keyindex{startpiece}, you code the
following macro:


\medskip\Bslash autolines $tml$

\medskip\noindent\rm where $t$ is the number of \ital{elementary spacings}
(the length of {\Bslash notes...\Bslash enotes}) in an average bar, $m$ is the
number of bars you wish in a line and $l$ is the number of lines you wish in a
page. This sets some parameters, namely \keyindex{maxbarsinline} and
\keyindex{maxlinesinpage} which are simply used to count the bars (counter is
\keyindex{barsinline}), optionally perform \keyindex{alaligne} or
\keyindex{alapage} (counter is \keyindex{linesinpage}) instead of the normal
\verb|barre| or \verb|bar|. You may freely alter the values of these
parameters, once they have been established by \keyindex{autolines}. Moreover,
you can still force line-breaking of page ejection using {\Bslash alaligne} or
\keyindex{alapage} without problem since these macros actually reset the bar
counters appropriately.

 \end{itemize}

 %\check
% \subsection{Often reported problems}

 %\check
\section{Extension Library}
All following files are invoked with saying \keyindex{input} \ital{filename}
 \subsection{musixadd}
Increases the number of instruments, slurs and beams up to nine.
 \subsection{musixbm}
 Provides 128th notes, either with hooks or with beams, namely the
\keyindex{ibbbbbu},
\keyindex{ibbbbbl},
\keyindex{nbbbbbu},
\keyindex{nbbbbbl},
\keyindex{tbbbbbu},
\keyindex{tbbbbbl},
\keyindex{Ibbbbbu},
\keyindex{Ibbbbbl},
\keyindex{cccccu},
\keyindex{zcccccu},
\keyindex{cccccl} and
\keyindex{zcccccl} commands.
 \subsection{musixbbm}
 Provides 128th notes, either with hooks or with beams, namely the
\keyindex{ibbbbbbu},
\keyindex{ibbbbbbl},
\keyindex{nbbbbbbu},
\keyindex{nbbbbbbl},
\keyindex{tbbbbbbu},
\keyindex{tbbbbbbl},
\keyindex{Ibbbbbbu},
\keyindex{Ibbbbbbl},
\keyindex{ccccccu},
\keyindex{zccccccu},
\keyindex{ccccccl} and
\keyindex{zccccccl} commands.
 \subsection{*musixcho}\label{song}
 These are some macros fit for chorus music. Provides following commands:
\keyindex{biglbrace}, \keyindex{bigrbrace}, \keyindex{braceheight},
\keyindex{Dtx} and \keyindex{Drtx} for double text, \keyindex{Ttx} and
\keyindex{Trtx} for triple text, \keyindex{Qtx} and \keyindex{Qrtx} for
quadruple text.

\keyindex{tx}\verb|{|$text$\verb|}|,
\keyindex{rtx}\verb|{|$text$\verb|}| for text of songs, with text extending
to right instead centered.
 \keyindex{hf}\verb|{|$m$\verb|}| sets  text
continuation rule of width $m$ \verb|\noteskip|.


\begin{music}
\tenrm
\parindent11.5mm
\braceheight5.4\Interligne\relax
%\rightline{Arr.: H.~W.~Eichholz}
\instrumentnumber2
\generalsignature{-2}
\generalmeter{\meterfrac22}
\setclef1\bass
\relativeaccid
\setinterinstrument1{11\Interligne}
\songtop2
\songbottom1
\setname2{\vbox{\hsize\parindent\centerline{Sopran}\centerline{Alt}}}
\setname1{\vbox{\hsize\parindent\centerline{Tenor}\centerline{Bass}}}
\sepbarrules\nobarnumbers
\beforeruleskip-2pt
\startpiece
%% bar 1
\znotes&\kernm2em\Qrtx 1.|2.|3.|4.*\en
\NOTes\sslur ILd1\sslur bNu1\zhl I\hu b%
  &\Qtx\ixhf{Oh}|No|No|There'll*\issluru0f\sslur dad1\zhup f\hl d\en
\Notes\zhl L\hu N&\Qtx ~|more|more|~be*\hl{^c}\en
\NOtes&\tsslur0g\qu g\en
%%% bar 2
\bar
\NOtes\zql I\qu b&\Qrtx\thf freedom,|weepin',|moanin',|singin',*\zqu i\ql d\en
\NOTesp\lpt I\zhl I\hup b&\zhup i\hlp d\en
%%% bar 3
\bar
\nspace
\NOTes\sslur JMd1\sslur bau1\zhl J\hu b%
  &\Qtx\ixhf{oh}|no|no|there'll*\issluru0j\sslur edd1\zhup j\hl{^e}\en
\Notes\zhl M\hu a&\Qtx~|more|more|~be*\hl{=e}\en
\NOtes&\tsslur0k\qu k\en
%%% bar 4
\bar
\NOtes\zql I\qu b&\Qrtx\thf freedom,|weepin',|moanin',|singin',*\zqu j\ql d\en
\NOTesp\lpt I\zhl I\hup b&\zhup i\hlp d\en
%%% bar 5
\bar
\NOTesp\sslur IJd1\sslur bau1\lpt I\zhl I\hup b%
  &\Qtx\ixhf{oh}|no|no|~there'll*\isslurd0f\issluru1j\zhup k\hlp f\en
\NOtes\zql J\qu a&\Qtx~|more|more|~be*\tsslur1f\zqu f\roff{\tsslur0e\ql e}\en
%%% bar 6
\bar
\NOtes\zql K\qu b&\Qrtx\thf freedom,|weepin',|moanin',|singin',*\zqu i\ql f\en
\NOtes\zql J\qu b&\zqu i\ql e\en
\NOtes\zql I\qu b&\kernm2\Internote\bigrbrace\rtx~~~over*\zqu i\ql d\en
\NOtes\zql G\qu b&\zqu k\ql f\en
%%% bar 7
\bar
\nspace
\NOTes\zhl J\hu b\caesura&\tx ~me,*\zhu j\hl{^e}\caesura\en
\Notes\zcl J\cu b&\rtx ~over*\zcu j\cl e\en
\NOtesp\zqlp J\qup b&\zqup k\lpt e\ql e\en
\endpiece
\end{music}

 See {\tt musixdoc.tex} source to get the coding of this long example.

 %\check
 \subsection{musixdat}
Here is the command \keyindex{today} defined for several languages.
The default is \keyindex{dateUSenglish}, but this can freely be changed at
end of \ttxem{musixdat.tex}.
Also available are \keyindex{dategerman}, \keyindex{dateaustrian},
\keyindex{dateenglish} and \keyindex{datefrench}, which yields:
\begin{quote}\begin{tabular}{ll}\hline
\verb|\dateUSenglish|&\dateUSenglish\today\\
\verb|\dateaustrian|&\dateaustrian\today\\
\verb|\dateenglish|&\dateenglish\today\\
\verb|\datefrench|&\datefrench\today\\
\verb|\dategerman|&\dategerman\today\\\hline
\end{tabular}\end{quote}
 \subsection{*musixdia}\label{diam}
These file is automatically loaded, if you use {\tt musixper.tex}.
Here is the list of notes it provides:
 \begin{itemize}
 \item The \raise.5ex\hbox to 1em{\musixchar37} symbol is obtained using the
\verb|\qu|, \verb|\qb|, \verb|\cu|, etc. macros preceeded with a ``\verb|y|''
(think of ``dyamond''). Available are \keyindex{yqu}, \keyindex{yqup},
\keyindex{yqupp}, \keyindex{yql}, \keyindex{yqlp}, \keyindex{yqlpp},
\keyindex{yzq}, \keyindex{yzqp}, \keyindex{yzqpp}, \keyindex{yqb},
\keyindex{ycu}, \keyindex{yccu}, \keyindex{ycccu}, \keyindex{yccccu},
\keyindex{ycl}, \keyindex{yccl}, \keyindex{ycccl}, \keyindex{yccccl},
\keyindex{ycup}, \keyindex{ycupp}, \keyindex{yclp}, \keyindex{yclpp}. The
symbol without a stem can be obtained by saying \keyindex{ynq} and the
non-spacing variant with \keyindex{zynq}.
 \item The \raise.5ex\hbox to 1em{\musixchar38} symbol is obtained using the
\verb|\qu|, \verb|\qb|, \verb|\cu|, etc. macros preceeded with a ``\verb|d|''
(think of \ital{diamond}). Available are \keyindex{dqu}, \keyindex{dqup},
\keyindex{dqupp}, \keyindex{dql}, \keyindex{dqlp}, \keyindex{dqlpp},
\keyindex{dzq}, \keyindex{dzqp}, \keyindex{dzqpp}, \keyindex{dqb},
\keyindex{dcu}, \keyindex{dccu}, \keyindex{dcccu}, \keyindex{dccccu},
\keyindex{dcl}, \keyindex{dccl}, \keyindex{dcccl}, \keyindex{dccccl},
\keyindex{dcup}, \keyindex{dcupp}, \keyindex{dclp}, \keyindex{dclpp}. The
symbol without a stem can be obtained by saying \keyindex{dnq} and the
non-spacing variant with \keyindex{dznq}.
 \end{itemize}
 %\check
 \subsection{*musixeng}
 This package is made for music typesetters who are allergic to rest names
taken from French, German or Italian\footnote{By the way, note that a
\ital{whole rest} is called \ital{pause} in French, \ital{ganze Pause} in
German, and \ital{pausa} in Italian.}. It does not provide new features, only
new command names.
 \begin{quote}\begin{tabular}{ll}\hline
\ital{original}&\ital{alternative}\\\hline
\keyindex{PAUSe}&\keyindex{Qwr}\\
\keyindex{PAuse}&\keyindex{Dwr}\\
\keyindex{liftpause}&\keyindex{liftwr}\\
\keyindex{pausep}&\keyindex{wrp}\\
\keyindex{pause}&\keyindex{wr}\\
\keyindex{lifthpause}&\keyindex{lifthr}\\
\keyindex{hpausep}&\keyindex{hrp}\\
\keyindex{hpause}&\keyindex{hr}\\
\keyindex{qp}&\keyindex{qr}\\
\keyindex{ds}&\keyindex{er}\\
\keyindex{qs}&\keyindex{eer}\\
\keyindex{hs}&\keyindex{eeer}\\
\keyindex{qqs}&\keyindex{eeeer}\\\hline
\end{tabular}\end{quote}
 \subsection{musixext}

\keyindex{slide}\verb|{|pitch\verb|}{|elements\verb|}{|slope[-8 to 8]\verb|}|~:
  glissando.

\keyindex{raggedstoppiece} :
  provides a ragged last line.
  %\check

 \subsection{*musixgre}\label{gregnotes}


 Provided that four line staffs (see \ref{stafflinenumber}) are used,
\itxem{gregorian music} is frequently quoted using specific \itxem{neumes},
established in the thirteenth century, and this way of coding has been
commonly used for the coding of liturgical chant in the Catholic Church until
the middle of the twentieth century. Nevertheless, gregorian chant coding is
not really an antique feature, since it has been codified in 1905 with recent
quasi-official updates in the eightties.


{\noindent\sl REMARK:\label{gregoriancappella} strictly writing, including
gregorian chant coding in \musixtex{} is a pure nonsense. Of course, many
people find it interesting to have the possibility of coding gregorian neumes
together with modern music, but having a score with both a gregorian chant and
a choir or instruments in definitely \ital{heretic}. The reason is that
grogorian chant must be sung \ital{a cappella}, without instrument and without
underlying polyphony. As a matter of fact, serious music schools ceased to
teach how to accompany gregorian chant approximately 20 years ago.

 However, there are still some pseudo-gregorian chants in the Catholic
repertoire which deserve organ or orchestra accompaniment: these are latine
speaking gregorian imitations composed in the eighteenth century, such as the
famous \ital{Angel's mass} of the \ital{Messe royale de Du Mont} which were
printed using gregorian neumes by official catholic publishers instead of
using the music denotations fit for renaissance and baroque pieces...}


 Symbols available in \musixtex\ are
mainly those of the 1905 standard, as provided by Beda {\sc
Szukics}\index{Szukics, B.@{\sc Szukics, B.}}:

\subsubsection{The clefs}

\begin{itemize}
 \item The gregorian C clef: \raise 2.5pt\hbox to 1cm{\gregorianCclef\hfil}~=
 \keyindex{gregorianCclef}, normally activated for instrument $n$ with the
command:
 \begin{quote}
 \keyindex{setaltoclefsymbol} $n$ \keyindex{gregorianCclef}
 \end{quote}
 \item The gregorian F clef:  \raise 2.5pt\hbox to 1cm{\gregorianFclef\hfil}~=
\keyindex{gregorianFclef}, normally activated with the
\verb|\setbassclefsymbol| command.
 \end{itemize}

 \subsubsection{The basic elementary symbols}
 \begin{itemize}

 \item Diamond shaped \itxem{punctum} (of different shape compared to the
percussion diamond): \raise 2.5pt\hbox{\xgregchar1}~ =
\keyindex{diapunc}~$p$~.
 \item Square \itxem{punctum}: \raise 2.5pt\hbox{\xgregchar5}~ =
\keyindex{squ}~$p$ or \keyindex{punctum}~$p$~.
 \item Left stemmed \itxem{virga} (not in the 1905 gregorian standard): \raise
2.5pt\hbox{\xgregchar6}~ = \keyindex{lsqu}~$p$~.
 \item Right stemmed \itxem{virga}: \raise 2.5pt\hbox{\xgregchar7}~ =
\keyindex{rsqu}~$p$ or \keyindex{virga}~$p$~.
 \item \ital{Apostropha}\index{apostropha}: \raise 2.5pt\hbox{\xgregchar3}~ =
\keyindex{apostropha}~$p$~.
 \item \ital{Oriscus}\index{oriscus}: \raise 2.5pt\hbox{\xgregchar10}~ =
\keyindex{oriscus}~$p$~.

 \item \ital{Quilisma}\index{quilisma}: \raise 2.5pt\hbox{\xgregchar125}~ =
\keyindex{quilisma}~$p$~.
 \item \ital{Punctum auctum} (up)\index{punctum auctum}: \raise 2.5pt\hbox{\xgregchar9}~ =
\keyindex{punctumauctup}~$p$~.
 \item \ital{Punctum auctum} (down)\index{punctum auctum}: \raise 2.5pt\hbox{\xgregchar8}~ =
\keyindex{punctumauctdown}~$p$~.
 \item Diamond shaped \ital{punctum auctum} (down)\index{punctum auctum}:
\raise 2.5pt\hbox{\xgregchar2}~ = \keyindex{diapunctumauctdown}~$p$~.
 \item \ital{Punctum deminutum}\index{punctum deminutum}: \raise
2.5pt\hbox{\xgregchar4}~ = \keyindex{punctumdeminutum}~$p$~.
 \item \ital{Apostropha aucta}\index{apostropha aucta}: \raise
2.5pt\hbox{\xgregchar11}~ = \keyindex{apostropha aucta}~$p$~.


\end{itemize}
 All non-\ital{liquescens} symbols have a non-spacing variant, which are
\keyindex{zdiapunc}, \keyindex{zsqu}, \keyindex{zlsqu}, \keyindex{zrsqu},
\keyindex{zapostropha} and \keyindex{zoriscus}.

\subsubsection{The plain complex neumes}
Other \itxem{neumes} can be obtained by combining two or more of these
symbols. Since \itxem{neumes} have a special note head width, an additional
shifting macro is provided, namely \keyindex{groff}. It is similar to
\verb|\roff|, but the offset is smaller; to implement also triple symbol neumes,
another shifting macro is provided, namely \keyindex{dgroff} which performs an
offset twice the offset of \verb|\groff|..

 Since most of these symbols depend on relative pitches of their components,
one could not provide all compact combinations as single symbols. Following
compound symbols are:

\begin{description}
 \item[\keyindex{bivirga} $n$ $p$], for example:

 \begin{music}
 \elemskip 10pt
 \setsize1{\Largevalue}
 \instrumentnumber 1
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \bivirga ab\enotes
 \notes \bivirga cc\enotes
 \endextract
 \end{music}
  This example was coded as:
  \begin{quote}\begin{verbatim}
 \instrumentnumber 1
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \bivirga ab\enotes
 \notes \bivirga cc\enotes
 \endextract
  \end{verbatim}\end{quote}

 \item[\keyindex{trivirga} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \setsize1{\Largevalue}
 \instrumentnumber 1
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \Notes \trivirga abc\enotes
 \Notes \trivirga cca\enotes
 \endextract
 \end{music}

 \item[\keyindex{bistropha} $n$ $p$], for example:

 \begin{music}
 \elemskip 10pt
 \setsize1{\Largevalue}
 \instrumentnumber 1
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \bistropha ab\enotes
 \notes \bistropha cc\enotes
 \endextract
 \end{music}

 \item[\keyindex{tristropha} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \setsize1{\Largevalue}
 \instrumentnumber 1
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \Notes \tristropha abc\enotes
 \Notes \tristropha cca\enotes
 \endextract
 \end{music}

  \item[\keyindex{clivis} $n$ $p$], for example:

 \begin{music}
 \elemskip 10pt
 \setsize1{\Largevalue}
 \instrumentnumber 1
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \clivis ba\enotes
 \notes \clivis ca\enotes
 \endextract
 \end{music}

 \item[\keyindex{lclivis} $n$ $p$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \lclivis ba\enotes
 \notes \lclivis ca\enotes
 \endextract
 \end{music}

 \item[\keyindex{podatus} $n$ $p$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \podatus ab\enotes
 \notes \podatus ac\enotes
 \notes \podatus cf\enotes
 \endextract
 \end{music}

 \item[\keyindex{podatusinitiodebilis} $n$ $p$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \podatusinitiodebilis ab\enotes
 \notes \podatusinitiodebilis ac\enotes
 \notes \podatusinitiodebilis cf\enotes
 \endextract
 \end{music}

 \item[\keyindex{lpodatus} $n$ $p$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \lpodatus ab\enotes
 \notes \lpodatus ce\enotes
 \endextract
 \end{music}

 \item[\keyindex{pesquassus} $n$ $p$], for example:
 
 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \pesquassus ab\enotes
 \notes \pesquassus ae\enotes
 \endextract
 \end{music}

 \item[\keyindex{quilismapes} $n$ $p$], for example:
 
 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \quilismapes ab\enotes
 \notes \quilismapes ae\enotes
 \endextract
 \end{music}

  \item[\keyindex{torculus} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \torculus aba\enotes
 \notes \torculus cfd\enotes
 \notes \torculus afc\enotes
 \endextract
 \end{music}

  \item[\keyindex{torculusinitiodebilis} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \torculusinitiodebilis aba\enotes
 \notes \torculusinitiodebilis cfd\enotes
 \notes \torculusinitiodebilis afc\enotes
 \endextract
 \end{music}

 \item[\keyindex{Porrectus} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \Porrectus bab\enotes
 \notes \Porrectus bac\enotes
 \notes \Porrectus bNd\enotes
 \notes \Porrectus bMe\enotes
 \notes \Porrectus bLe\enotes
 \endextract
 \end{music}
\noindent coded:
 \begin{quote}\begin{verbatim}
 \notes \Porrectus bab\enotes
 \notes \Porrectus bac\enotes
 \notes \Porrectus bNd\enotes
 \notes \Porrectus bMe\enotes
 \notes \Porrectus bLe\enotes
 \end{verbatim}\end{quote}

 \verb|\Porrectus| exists in four different shapes, depending on the
difference between first and second argument. The constraint is that
 $$ n-4 \leq p \leq n-1 $$ other wise a diagnostic occurs. Note also that
\keyindex{bporrectus} provides the first curved part of the \verb|porrectus|
command, if you need it... It has two arguments, the starting pitch, the lower
pitch.

 \item[\keyindex{Porrectusflexus} $n$ $p$ $q$ $r$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \Porrectusflexus  bacN\enotes
 \notes \Porrectusflexus  bNdb\enotes
 \notes \Porrectusflexus  bMeb\enotes
 \notes \Porrectusflexus  bLea\enotes
 \endextract
 \end{music}
\noindent coded:
 \begin{quote}\begin{verbatim}
 \notes \Porrectusflexus  bacN\enotes
 \notes \Porrectusflexus  bNdb\enotes
 \notes \Porrectusflexus  bMeb\enotes
 \notes \Porrectusflexus  bLea\enotes
 \end{verbatim}\end{quote}

 
 \item[\keyindex{climacus} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \Notes \climacus cbN\enotes
 \Notes \climacus cba\enotes
 \Notes \climacus dbN\enotes
 \endextract
 \end{music}

 \item[\keyindex{climacusresupinus} $n$ $p$ $q$ $r$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \Notes \climacusresupinus cbNa\enotes
 \Notes \climacusresupinus cbab\enotes
 \Notes \climacusresupinus dbNb\enotes
 \endextract
 \end{music}

 \item[\keyindex{lclimacus} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \lclimacus cbN\enotes
 \notes \lclimacus cfd\enotes
 \notes \lclimacus afc\enotes
 \endextract
 \end{music}


 \item[\keyindex{scandicus} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \scandicus abe\enotes
 \notes \scandicus ceg\enotes
 \endextract
 \end{music}

 \item[\keyindex{salicus} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \Notes \salicus abe\enotes
 \Notes \salicus ceg\enotes
 \endextract
 \end{music}

 \item[\keyindex{salicusflexus} $n$ $p$ $q$ $r$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \Notes \salicusflexus abec\enotes
 \Notes \salicusflexus cegd\enotes
 \endextract
 \end{music}

 \item[\keyindex{trigonus} $n$ $p$ $q$], for example\footnote{The second
example is in principle irrelevant, but it shows the possibilities, in case
of.}:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \Notes \trigonus aaN\enotes
 \Notes \trigonus cef\enotes
 \endextract
 \end{music}

\end{description}

\subsubsection{The liquescens complex neumes}\index{liquescens neumes}
\begin{description}
  \item[\keyindex{clivisauctup} $n$ $p$], for example:

 \begin{music}
 \elemskip 10pt
 \setsize1{\Largevalue}
 \instrumentnumber 1
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \clivisauctup ba\enotes
 \notes \clivisauctup ca\enotes
 \endextract
 \end{music}
  \item[\keyindex{clivisauctdown} $n$ $p$], for example:

 \begin{music}
 \elemskip 10pt
 \setsize1{\Largevalue}
 \instrumentnumber 1
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \clivisauctdown ba\enotes
 \notes \clivisauctdown ca\enotes
 \endextract
 \end{music}
 \item[\keyindex{podatusauctup} $n$ $p$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \podatusauctup ab\enotes
 \notes \podatusauctup ac\enotes
 \notes \podatusauctup cf\enotes
 \endextract
 \end{music}
 \item[\keyindex{podatusauctdown} $n$ $p$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \podatusauctdown ab\enotes
 \notes \podatusauctdown ac\enotes
 \notes \podatusauctdown cf\enotes
 \endextract
 \end{music}

 \item[\keyindex{pesquassusauctdown} $n$ $p$], for example:
 
 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \pesquassusauctdown ab\enotes
 \notes \pesquassusauctdown ae\enotes
 \endextract
 \end{music}

 \item[\keyindex{quilismapesauctdown} $n$ $p$], for example:
 
 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \quilismapesauctdown ab\enotes
 \notes \quilismapesauctdown ae\enotes
 \endextract
 \end{music}
 
  \item[\keyindex{torculusauctdown} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \torculusauctdown aba\enotes
 \notes \torculusauctdown cfd\enotes
 \notes \torculusauctdown afc\enotes
 \endextract
 \end{music}

 \item[\keyindex{Porrectusauctdown} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \Porrectusauctdown bac\enotes
 \notes \Porrectusauctdown bNd\enotes
 \notes \Porrectusauctdown bMe\enotes
 \notes \Porrectusauctdown bLe\enotes
 \endextract
 \end{music}

 \item[\keyindex{climacusauctdown} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \Notes \climacusauctdown cbN\enotes
 \Notes \climacusauctdown caM\enotes
 \Notes \climacusauctdown aNM\enotes
 \endextract
 \end{music}

 \item[\keyindex{scandicusauctdown} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \scandicusauctdown abe\enotes
 \notes \scandicusauctdown ceg\enotes
 \endextract
 \end{music}

 \item[\keyindex{salicusauctdown} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \Notes \salicusauctdown abe\enotes
 \Notes \salicusauctdown ceg\enotes
 \endextract
 \end{music}

  \item[\keyindex{clivisdeminut} $n$ $p$], for example:

 \begin{music}
 \elemskip 10pt
 \setsize1{\Largevalue}
 \instrumentnumber 1
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \clivisdeminut ba\enotes
 \notes \clivisdeminut ca\enotes
 \endextract
 \end{music}

 \item[\keyindex{podatusdeminut} $n$ $p$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \podatusdeminut ab\enotes
 \notes \podatusdeminut ac\enotes
 \notes \podatusdeminut cf\enotes
 \endextract
 \end{music}

  \item[\keyindex{torculusdeminut} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \torculusdeminut aba\enotes
 \notes \torculusdeminut cfd\enotes
 \notes \torculusdeminut afc\enotes
 \endextract
 \end{music}

  \item[\keyindex{torculusdebilis} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \torculusdebilis aba\enotes
 \notes \torculusdebilis cfd\enotes
 \notes \torculusdebilis afc\enotes
 \endextract
 \end{music}

 \item[\keyindex{Porrectusdeminut} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \Porrectusdeminut bac\enotes
 \notes \Porrectusdeminut bNd\enotes
 \notes \Porrectusdeminut bMe\enotes
 \notes \Porrectusdeminut bLe\enotes
 \endextract
 \end{music}

 \item[\keyindex{climacusdeminut} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \Notes \climacusdeminut cbN\enotes
 \Notes \climacusdeminut caM\enotes
 \Notes \climacusdeminut aML\enotes
 \endextract
 \end{music}

 \item[\keyindex{scandicusdeminut} $n$ $p$ $q$], for example:

 \begin{music}
 \elemskip 10pt
 \instrumentnumber 1
 \setsize1{\Largevalue}
 \setstaffs 1 1
 \setlines 1 4
 \setclef 1{3000}
 \setaltoclefsymbol 1 \gregorianCclef
 \startextract
 \notes \scandicusdeminut abe\enotes
 \notes \scandicusdeminut ceg\enotes
 \endextract
 \end{music}
\end{description}

 %\check
 \subsection{musixgui} \ttxem{musixgui.tex} provides some macros for
typesetting \itxem{guitar tablatures}. Most times they are used above modern
music. To give an example:

\begin{music}
\hsize130mm
\tenrm
\parindent0pt
\generalmeter{\meterfrac34}
\generalsignature1
\startbarno0
\def\txh{-6.5}
\def\tx#1*{\zchar\txh{\lrlap{\kern3\Internote#1}}}
\def\rtx#1*{\zchar\txh{\kern-3\Internote#1}}
\stafftopmarg10\Interligne
\raiseguitar{20}
\nostartrule
\startpiece
\addspace{.5\afterruleskip}%
\NOtes\tx We*\qa d\en
\bar
\NOtes\guitar G{}o-----\gbarre3\gdot25\gdot35\gdot44\tx wish*\qa g\en
\Notes\tx you*\ca g\en
\Notes\tx a*\ca h\en
\Notes\zchar\txh{merry}\ca g\en
\Notes\ca f\en
\bar
\NOtes\guitar C5o-----\gbarre4\gdot26\gdot36\gdot45\rtx christmas,*\qa e\en
\NOtes\qa e\en
\NOtes\guitar {e/H}5o-----\gbarre3\gdot35\gdot45\gdot54\tx we*\qa e\en
\bar
\NOtes\guitar {A$\!^7$}5o-----\gbarre1\gdot23\gdot42\tx wish*\qa h\en
\Notes\tx you*\ca h\en
\Notes\tx a*\ca i\en
\Notes\zchar\txh{merry}\ca h\en
\Notes\ca g\en
\bar
\NOtes\guitar D{}xxo---\gdot42\gdot53\gdot62\rtx christmas,*\qa f\en
\NOtes\qa d\en
\zbar
\NOtes\guitar{D/c}{}xo----\gdot23\gdot42\gdot53\gdot62\tx we*\qa d\en
\bar
\NOtes\guitar{B$^7$}{}xo----\gdot22\gdot31\gdot42\gdot62\tx wish*\qa i\en
\Notes\tx you*\ca i\en
\Notes\tx a*\ca j\en
\Notes\tx ~mer-*\ca i\en
\Notes\tx ry*\ca h\en
\bar
\NOtes\guitar e{}xxo---\gdot32\tx ~christ-*\qa g\en
\NOtes\tx mas*\qa e\en
\Notes\guitar {G/d}{}xxo---\gdot63\tx and*\ca d\en
\Notes\tx a*\ca d\en
\bar
\NOtes\guitar{C$^6$}{}xo----\gdot23\gdot32\gdot42\gdot51\tx ~~hap~-*\qa e\en
\NOtes\tx py*\qa h\en
\NOtes\guitar{D$^7$}{}xo---x\gdot25\gdot34\gdot45\gdot45\gdot53\tx new*\qa f\en
\bar
\NOTes\guitar G{}o-----\gbarre3\gdot25\gdot35\gdot44\tx ~year.*\ha g\en
\setdoublebar\endpiece
\end{music}

\medskip
\keyindex{guitar} sets the grid, the chord name, the relative barre and play
indicators. As example the first chord in upper example was coded as:

\verb|\guitar G{}o-----\gbarre3\gdot25\gdot35\gdot44|

where the first argument is put above the grid to indicate the chord name, the
second is empty (relative barre) and the other six indicates if the string
is played with either \verb|x|, \verb|o| or \verb|-|. The dots are set with
\keyindex{gdot}~$sb$ where the $s$ is the string and $b$ is the barre. The
rule is set with \keyindex{gbarre}~$b$ where $b$ indicates the barre.

The whole chord may be vertically shifted with
\keyindex{raiseguitar}\verb|{|$n$\verb|}|, where $n$ is a number
in units of \keyindex{internote}. It might be useful to reserve additional
space above the chord by advancing \keyindex{stafftopmarg} to
something like \verb|stafftopmarg=10\Interligne|.

If you need the chords more often, it might be useful to define your own
macros, e.g.~saying:

\verb|\def\Dmajor{\guitar D{}x-----\gdot42\gdot53\gdot62}%|
 \subsection{*musixlit}\label{litu}\label{otherbars}
 Provides a way of coding intermediate between gregorian and baroque/romantic,
still used\footnote{Was written by A. {\sc Egler}. To my knowledge (D. T.),
liturgical works are either written with modern music quotation, or using the
gregorian \itxem{neumes} which have been normalized in 1905.} for liturgical
works!

\makeatletter
\catcodesmusic
%\def\vnotes#1\elemskip{\noteskip#1\@l@mskip \multnoteskip\scal@noteskip
%  \not@s}

%\def\not@s{\def|{\nextstaff}\def&{\nextinstrument}\normaltranspose\transpose
%  \check@nopen\notes@open\@ne
%  \kern\n@skip\advance\x@skip\n@skip \locx@skip\x@skip
%  \n@skip\noteskip \noinstrum@nt\z@ \begininstrument}

%\def\en{\@ndstaff\notes@open\z@
%  \ifx\@ne\V@sw \widthtyp@\z@\t@rmskip \let\V@sw\empty \fi}

\def\double#1{\roffset{1.2}{\advancefalse#1}#1}
\makeatother

 % Don't know if this example correct ??? But looks nice...
\begin{music}
\parindent0pt
\instrumentnumber{2}
\interstaff{11}
\generalsignature2
\setclefsymbol2\oldGclef
\setstaffs1{2}
\setclef1\bass
\setinterinstrument1{-\Interligne}
\startpiece
\shortbarrules
\addspace\afterruleskip
\hardlyrics{Il nous a sign\'es de son
  }\notes\zw d\wh K|\zw f\wh h&\rtx\thelyrics*\Hpause h1\en
\qspace\qspace
\NOTes\zhl N\hu d|\zhl g\hu i&\tx sang*\double{\cnql i}\en
\bar
\hardlyrics{Et nous avons \'e-
  }\notes\zw d\wh K|\zw f\wh h&\rtx\thelyrics~-*\Hpause h1\en
\qspace\qspace
\NOTes\zhl M\hu c|\zhl f\hu h&\rtx t\'e*\double{\cnql i}\en
\NOtes\zql L\qu e|\zql b\qu g&\tx ~pro-*\cnqu g\en
\NOtes\zql b\qu d|\zql d\qu f&\tx ~t\'e-*\cnqu f\en
\NOTes\zhl a\hu c|\zhl e\hu h&\tx g\'es.*\double{\cnqu h}\en
\bar
\NOtes\zql M\qu d|\zql d\qu h&\tx ~~Al~-*\cnqu h\en
\NOtes\zql K\qu a|\zql f\qu k&\tx ~~le~-*\cnql k\en
\NOTes\zhl H\hu a|\zhl e\hu j&\tx ~~lu~-*\double{\cnql j}\en
\bar
\NOTEs\zhl K\hu a|\zhl f\hu k&\tx ~~ia !*\cnhl k\en
\sepbarrules
\endpiece

\startpiece
\interbarrules
\addspace\afterruleskip
\hardlyrics{Il nous a sign\'es de son
  }\notes\zw d\wh K|\zw f\wh h&\rtx \thelyrics*\Hlonga h1\en
\qspace\qspace
\NOTes\zhl N\hu d|\zhl g\hu i&\tx sang*\chl i\en
\bar
\hardlyrics{Et nous avons \'e
  }\notes\zw d\wh K|\zw f\wh h&\rtx \thelyrics~-*\Hlonga h1\en
\qspace\qspace
\NOTes\zhl M\hu c|\zhl f\hu h&\rtx t\'e*\chl i\en
\NOtes\zql L\qu e|\zql b\qu g&\tx ~pro-*\cqu g\en
\NOtes\zql b\qu d|\zql d\qu f&\tx ~t\'e-*\cqu f\en
\NOTes\zhl a\hu c|\zhl e\hu h&\tx g\'es.*\chu h\en
\bar
\NOtes\zql M\qu d|\zql d\qu h&\tx ~~Al~-*\cqu h\en
\NOtes\zql K\qu a|\zql f\qu k&\tx ~~le~-*\cql k\en
\NOTes\zhl H\hu a|\zhl e\hu j&\tx ~~lu~-*\chl j\en
\bar
\NOTEs\zbreve K\zbreve a|\zbreve f\zbreve k&\tx ~~ia !*\zbreve k\en
\sepbarrules
\endpiece
\end{music}

 This package provides:
 \begin{itemize}
 \item\keyindex{oldGclef} which replaces the ordinary G clef with an old one,
using (for instrument 2 as an example):
 \verb|\settrebleclefsymbol2\oldGclef|

 \item\keyindex{cqu} $p$ provides a square headed quarter note with stem up at
pitch $p$.

 \item\keyindex{cql} $p$ provides a square headed quarter note with stem down at
pitch $p$.

 \item\keyindex{chu} $p$ provides a square headed half note with stem up at
pitch $p$.

 \item\keyindex{chl} $p$ provides a square headed half note with stem down at
pitch $p$.

 \item\keyindex{cnqu} $p$ and \keyindex{cnql} $p$ provide a stemless square headed
quarter note at pitch $p$.

 \item\keyindex{cnhu} $p$ and \keyindex{cnhl} $p$ provide a stemless square
headed half note at pitch $p$.

 \item\keyindex{Hpause} $p$ $n$ provides an arbitrary length pause at pitch
$p$ and of length $n$ \keyindex{noteskip}. However, in the first of the above
example, this feature has been used to denote an arbitrary length note rather
than a rest!

 \item\keyindex{Hlonga} $p$ $n$ provides an arbitrary length note at pitch
$p$ and of length $n$ \keyindex{noteskip}.
This feature has been used to denote an arbitrary length note in the second of
the above examples.

 \item\keyindex{shortbarrules} has been used to provide bar rules shorter than
the staff vertical width.

 \item\keyindex{interbarrules} has been used to provide bars between the
staffs, rather that over them. This is an arbitrary question of taste...
 \end{itemize}



 \subsection{musixmad} \ttxem{musixmad.tex} increases the number of
instruments, slurs and beams up to twelve.
 \subsection{musixper}\label{perc}

  Provides specific percussion symbols, especially \keyindex{drumclef}
(used in section \ref{sectiondrum}). These definitions cause problems
since drum and percussion notation is not standardized.
So it might be clever to specifiy the names of instruments for each
used symbol.


 %\check
 \begin{itemize}
 \item The \raise.5ex\hbox{\musixchar113}~{}~symbol which is obtained using the
\verb|\qu|, \verb|\qb|, \verb|\cu|, etc. macros preceeded with a
``\verb|dc|'' (think of \ital{DiagonalCross} for e.g. closed \itxem{hihat}).
Available are
\keyindex{dcqu},
\keyindex{dcql},
\keyindex{dcqb},
\keyindex{dczq},
\keyindex{dccu},
\keyindex{dcccu},
\keyindex{dccl} and
\keyindex{dcccl}.

 \item The \raise.5ex\hbox{\musixchar112}~{}~symbol which is obtained using the
\verb|\qu|, \verb|\qb|, \verb|\cu|, etc. macros preceeded with a
``\verb|dh|''
(think of \ital{DiagonalcrossHalfcircle} for e.g. half open \itxem{hihat}).
Available are
\keyindex{dhqu},
\keyindex{dhql},
\keyindex{dhqb},
\keyindex{dhzq},
\keyindex{dhcu},
\keyindex{dhccu},
\keyindex{dhcl} and
\keyindex{dhccl}.

 \item The \raise.5ex\hbox{\musixchar111}~{}~symbol which is obtained using the
\verb|\qu|, \verb|\qb|, \verb|\cu|, etc. macros preceeded with a
``\verb|do|''
(think of \ital{DiagonalCross and O for circle} for open \itxem{hihat}).
Available are
\keyindex{doqu},
\keyindex{doql},
\keyindex{doqb},
\keyindex{dozq},
\keyindex{docu},
\keyindex{doccu},
\keyindex{docl} and
\keyindex{doccl}.

 \item The \raise.5ex\hbox{\musixchar114}~{}~symbol which is obtained using the
\verb|\qu|, \verb|\qb|, \verb|\cu|, etc. macros preceeded with a
``\verb|x|'' (e.g. for spoken text of songs).
Available are
\keyindex{xqu},
\keyindex{xql},
\keyindex{xqb},
\keyindex{xzq},
\keyindex{xcu},
\keyindex{xccu},
\keyindex{xcl} and
\keyindex{xccl}.

 \item The \raise.5ex\hbox{\musixchar115}~{}~symbol which is obtained using the
\verb|\qu|, \verb|\qb|, \verb|\cu|, etc. macros preceeded with a
``\verb|ox|'' (.!.).
Available are
\keyindex{oxqu},
\keyindex{oxql},
\keyindex{oxqb},
\keyindex{oxzq},
\keyindex{oxcu},
\keyindex{oxccu},
\keyindex{oxcl} and
\keyindex{oxccl}.

 \item The \raise.5ex\hbox{\musixchar118}~{}~symbol which is obtained using the
\verb|\qu|, \verb|\qb|, \verb|\cu|, etc. macros preceeded with a
``\verb|ro|'' (think of \ital{RhOmbus} for e.g.~shaker).
Available are
\keyindex{roqu},
\keyindex{roql},
\keyindex{roqb},
\keyindex{rozq},
\keyindex{rocu},
\keyindex{roccu},
\keyindex{rocl} and
\keyindex{roccl}.

 \item The \raise.5ex\hbox{\musixchar116}~{}~symbol which is obtained using the
\verb|\qu|, \verb|\qb|, \verb|\cu|, etc. macros preceeded with a
``\verb|tg|'' (think of \ital{TrianGle} for e.g.~rattle).
Available are
\keyindex{tgqu},
\keyindex{tgql},
\keyindex{tgqb},
\keyindex{tgzq},
\keyindex{tgcu},
\keyindex{tgccu},
\keyindex{tgcl} and
\keyindex{tgccl}.

 \item The \raise.5ex\hbox to 1em{\musixchar117\hfil} symbol which is obtained using the
\verb|\qu|, \verb|\qb|, \verb|\cu|, etc.~macros preceeded with a
``\verb|k|'' (for bongos).
Available are
\keyindex{kqu},
\keyindex{kql},
\keyindex{kqb},
\keyindex{kzq},
\keyindex{kcu},
\keyindex{kccu},
\keyindex{kcl} and
\keyindex{kccl}.
 \end{itemize}
 \subsection{musixpoi}
 Adds pointed compact definitions of notes.
Available are
\keyindex{ccup},
\keyindex{zccup},
\keyindex{cclp},
\keyindex{zcclp},
\keyindex{ccupp},
\keyindex{zccupp},
\keyindex{cclpp},
\keyindex{zcclpp},
\keyindex{cccup},
\keyindex{zcccup},
\keyindex{ccclp},
\keyindex{zccclp},
\keyindex{cccupp},
\keyindex{zcccupp},
\keyindex{ccclpp},
\keyindex{zccclpp},
\keyindex{ccccup},
\keyindex{zccccup},
\keyindex{cccclp},
\keyindex{zcccclp},
\keyindex{ccccupp},
\keyindex{zccccupp},
\keyindex{cccclpp} and
\keyindex{zcccclpp}.

 %\check
 \subsection{musixstr}\label{musixstr}\index{musixstr@{\tt musixstr.tex}}
 This file provides a set of indications for \itxem{string instruments} (e.g.
\ixem{violin}) execution, provided by Werner {\sc Icking}\index{Icking,
W.@{\sc Icking, W.}}.


 {\input musixstr
 The symbols described below should be posted at the wanted place using
 \verb|\zcharnote|$p$\verb|{|$<command-name>$\verb|}|.

\begin{quote}\begin{description}

 \item[\hbox to 1em{\AB}~: \keyindex{AB} or  \keyindex{downbow}] down-bow


 \item[\hbox to 1em{\AUF}~: \keyindex{AUF} or \keyindex{upbow}] up-bow


 \item[\hbox to 1em{\SP}~: \keyindex{SP}] at the top of bow

 \item[\hbox to 1em{\FR}~: \keyindex{FR}] at the nut of bow

 \item[\GB\ or \Gb~: \keyindex{GB} or  \keyindex{Gb}] whole bow

 \item[\UH\ or \Uh~: \keyindex{UH} or  \keyindex{Uh}] lower half of bow

 \item[\OH\ or \Oh~: \keyindex{OH} or  \keyindex{Oh}] upper half of bow

 \item[\MI\ or \Mi~: \keyindex{MI} or \keyindex{Mi}] middle of bow

 \item[\UD\ or \Ud~: \keyindex{UD} or  \keyindex{Ud}] lower third of bow

 \item[\OD\ or \Od~: \keyindex{OD} or  \keyindex{Od}] upper third of bow

 \item[\Pizz~: \keyindex{Pizz}] left hand pizzicato or trill

 \end{description}\end{quote}
 }
 %\check
 \subsection{musixsty}\index{musixsty@{\tt musixsty.tex}}

 This file is made for non \TeX perts and/or lazy score typesetters. Although
related to \musixtex, it has little to see with music, but it helps writing
all surrounding texts, like \itxem{titles}, \itxem{author names}, historical
comments, etc. It provides
 \begin{itemize}
 \item a set of font definitions of common use, such as \verb|\tenrm|,
\verb|\eightrm|, etc.,
 \item a reasonable setting of \keyindex{hsize}, \keyindex{vsize},
\keyindex{hoffset}, \keyindex{voffset} dimensions in order to have a good
layout fi for European A4 paper\footnote{People addicted to \itxem{legal} or
other paper sizes should correct it for their own purpose.}
 \item a set of text size commands:

 \begin{description}
  \item[\keyindex{eightpoint}] which sets the usual \keyindex{rm},
\keyindex{bf}, \keyindex{sl}, \keyindex{it} commands to 8 point font size;
  \item[\keyindex{tenpoint}] which sets the usual \keyindex{rm},
\keyindex{bf}, \keyindex{sl}, \keyindex{it} commands to 10 point font size;
  \item[\keyindex{twlpoint}] to get 12 point font size;
  \item[\keyindex{frtpoint}] to get 14.4 point font size;
  \item[\keyindex{svtpoint}] to get 17.28 point font size;
  \item[\keyindex{twtypoint}] to get 20.74 point font size;
  \item[\keyindex{twfvpoint}] to get 24.88 point font size;
 \end{description}
 \item a set of commands to make easy piece titles:
  \begin{itemize} \item \keyindex{author} or
\keyindex{fullauthor} to be put at the right of the first page, below the
title of the piece; the calling sequence is, for example:

  \verb|     \author{Daniel TAUPIN\\organiste \`a Gif-sur-Yvette}|

  \noindent where the \verb|\\| makes the author's name displayed on two or
several lines.


  \item \keyindex{shortauthor} to be put at the bottom of each page,
  \item \keyindex{fulltitle} which is the big main title of the piece,
  \item \keyindex{subtitle} is displayed below the main title of the piece,
  \item \keyindex{shorttitle} or \keyindex{title}
  which is the title repeated at the bottom of each page,
  \item \keyindex{othermention} which is displayed on the left of the page, in
front of the author's name (it may contain several \verb|\\| to display it on
several lines,
  \item \keyindex{maketitle}  which displays all the previous stuff.
  \end{itemize}

 \item  Some additional commands to make \itxem{footnotes}.
 These commands are
  \begin{itemize}
   \item The normal Plain-\TeX\ \keyindex{footnote} command which has two
arguments --- not only one as in \LaTeX\index{LaTeX@\protect\LaTeX} --- namely
the label of the footnote, i.e. any sequence of characters and not only
figures, and the text of the footnote.

\begin{important} the \verb|\footnote| command does not work inside
boxes\footnote{This is not a \TeX-bug, this is a feature!}, therefore this
command must not be issued within music. But another alternate feature is
provided (see below).
 \end{important}

 \item The \keyindex{Footnote} command, which counts the footnotes and uses a
number as the label of the foot note (equivalent to \LaTeX's \verb|\footnote|
command). The same restriction applies concerning footnotes within the music
coding.

 \item The \keyindex{vfootnote} command, taken from the Plain-\TeX, which
makes the footnote itself at the bottom of the current page, but does not put
the footnote label at the place it is referred in the main text.

 Thus, if a footnote is needed whose reference lies inside the music itself,
the music typesetter must perform it in two steps:
 \begin{enumerate}
  \item quote the reference inside the music, using \verb|zcharnote| for
example,
  \item post the footnote itself, using \verb|\vfootnote| outside the music,
either before \keyindex{startpiece} (or \verb|\debutmorceau| with {\tt
musixcpt.tex})  or between \keyindex{stoppiece} and
\keyindex{piececont} or equivalent commands.
 \end{enumerate}

  \end{itemize}

 \end{itemize}

 Note that \verb|musixsty| should not be used with \LaTeX.
 \subsection{musixtri}\index{musixtri@{\tt musixtri.tex}}
Provides triple pointed note symbols.
Available are:
\keyindex{lpppt},
\keyindex{whppp},
\keyindex{zwppp},
\keyindex{huppp},
\keyindex{hlppp},
\keyindex{zhppp},
\keyindex{zhuppp},
\keyindex{zhlppp},
\keyindex{quppp},
\keyindex{qlppp},
\keyindex{zquppp},
\keyindex{zqlppp},
\keyindex{zqppp},
\keyindex{cuppp},
\keyindex{zcuppp},
\keyindex{clppp},
\keyindex{zclppp},
\keyindex{qbppp} and
\keyindex{zqbppp}.

\section{Often reported problems and discussion faxilities}

\subsection{Newsgroups}\index{newsgroups} No specific newsgroup exist
concerning \mutex, \musictex{} or \musixtex; nevertheless W. Icking saw
articles on this topic in  {\tt comp.text.tex} as well as in {\tt
de.comp.tex}.

\subsection{Mailing list} A mailing-list does exist which was formerly
dedicated to \mutex, and now to \musictex{} and mostly to \musixtex.
You can subscribe to it by
sending an e-mail to  {\tt mutex-request@gmd.de}
with the message line\index{mailing list}

{\tt subscribe}

\subsection{FAQs}\index{FAQ}

{\tt gmd.de}, too, has a FAQ which is presently out-of-date and quite unusable
since it displays many questions and comments without giving the answer.
However, it will be probably enhanced in a near future. This
FAQ can be accessed using {\tt
ftp}:

{\tt ftp://ftp.gmd.de/music/mutex/faq}

\noindent and the the archive of the mailing list may be accessed also by {\tt
ftp}:

{\tt ftp://ftp.gmd.de/music/mutex/archive}

\noindent or:

{\tt http://www.gmd.de/Mail/}

 {\tt ftp.gmd.de} also contains a lot of stuff concerning music and
typesetting music, which can be accessed by WWW at:

{\tt http://ftp.gmd.de/Misc/Music/}



\chapter{Installation}\label{installation}

\section{*Getting the stuff}

As seen before, all the files are available at \itxem{anonymous ftp}
\verb|hprib.lps.u-psud.fr| (193.55.39.152) in the directory

 {\tt /pub/musixtex}

 The {\tt *.mf} source files are in

 {\tt /pub/musixtex/mf}

\noindent and the {\tt *.tfm} files are in 

 {\tt /pub/musixtex/tfm}

\noindent Besides, this manual is in

 {\tt /pub/musixtex/musixdoc.ps}

 Another directory, namely {\tt /pub/music\_zips} normally contains {\tt
musixtex.zip} which contains all the distribution for PC (\ixem{MS-DOS})
computers. This is only for {\tt ftp}-ing convenience since all source files
are directly available in the general directory and subdirectories. In
addition a set of examples (i.e. the files whose name does not begin with
``\verb|musix|'') is packed into \ttxem{musixexa.zip} and this manual is also in
\ttxem{musixdoc\_ps.zip}  (the PostScript version) and
\ttxem{musixdoc\_lj.zip} (the PCL version for Laserjets).
Finally the PK files of specific fonts are provided in \ttxem{musixpk.zip},
\ttxem{musixpk3.zip} (300 and 360 dpi) and  \ttxem{musixpk6.zip} (600 dpi);
getting these files is useless if you are able to \MF{} the files whose {\tt
*.mf} are provided in the main package.

{\sl\noindent CAUTION: the zipped files are provided in th PC line coding,
i.e. with {\tt <cr><lf>} at line ends, rather than single {\tt <lf>} as in the
\unix{} coding. This means that \unix{} users must carefully unzip these files
using the ``{\tt-a}'' (our ``{\tt-aa}'' options of {\tt unzip} to get correct
coding of the source files. Other wise they would find a lot of ``{\tt\^{}M}'' in
their files, which may cause further troubles.}\index{PC end of line
coding}\index{\^{}M}


 Besides, /unix{} users can also --- when in directory {\tt /pub} --- ask for:

 {\tt get musixtex.tar}\quad or

 {\tt get musixtex.tar.Z}\quad or

 {\tt get musixtex.tar.gz}\quad and even

 {\tt get musixtex.zip}

  Then, the {\tt hprib.lps.u-psud.fr} server will perform required collection
and/or compression ``on-the-fly''. Note that in that case the source files
will be in the \unix{} coding rather than PC coding of end of lines. Usually,
this is harmless for PC editors and \TeX{} motors, but who knows...
 

\ital{Fonts}\index{fonts} are provided in {\tt musixtex.zip} as {\tt *.mf}
files but also as {\tt *.tfm} and {\tt*.pk} files for 300~dpi printers or
previewers. Other values of the \ixem{dpi} parameter are also provided in
\verb|musixpk*.zip|.

Needed fonts are {\tt musix20}, {\tt musix16}, {\tt musix13}, {\tt musix11},
{\tt musix24}, {\tt musix29}, {\tt musixspx}\footnote{Inside this file are two
types of piano brackets available. The default you can see printing this doc,
the other you can see printing {\tt musicdoc}. If you prefer the other, which
are designed by Stanislav Kneifl, follow the instruction inside {\tt
musixsps.mf}},\index{Kneifl, S.@{\sc Kneifl, S.}}
 {\tt xslhu20}, {\tt xslhu16}, {\tt xslhu24}, {\tt xslhu29},
{\tt xslhd20}, {\tt xslhd16}, {\tt xslhd24}, {\tt xslhd29},
{\tt xslu20}, {\tt xslu16}, {\tt xslu24}, {\tt xslu29},
{\tt xsld20}, {\tt xsld16}, {\tt xsld24}, {\tt xsld29},
{\tt xslz20} and {\tt xslhz20}.

\section{Installing the fonts}
\ital{All} files with the extension {\tt .tfm}\footnote{\TeX\ font metric,
needed directly from binary for \TeX ing the examples or the doc.} has
to be copied in that directory, in which the other {\tt .tfm}'s are.

If you get the error message:

{\tt! Font ... not loadable: Metric (TFM) file not found.}

\noindent this means you have not succeeded to install the {\tt .tfm}'s in the
right directory. This is not a \musixtex\ error, but a local \TeX\
implementation error/misunderstanding. Then read or re-read your \TeX\
installation doc, put the {\tt tfm}'s at the very right place and start again.

The {\tt .tfm} only contains the width, height and depth of every character
of a font and is the only needed font-file for \TeX ing. For previewing
and/or printing you need the pixel fonts. On most systems they are packed
and have the extension \verb|.pk|(but perhaps you need the \verb|.gf|-files or
\verb|.300|-files or other: Ask your local \TeX-wizard\footnote{I have read
a mail from somebody, who has said, that he is able --- because he is a
professional --- to write an \verb|install| for installation of packages
like \musixtex. Really? Do it.}!) Most needed and spreaded are fonts for
\verb|dvi|-driver with resolution of 300dpi. Using Em\TeX the
\verb|.pk|-fonts have to be copied in \verb|...\pixel.lj\300dpi\|. For other
resolution refer your local manual or \TeX-wizard.

\section{Building a format}\label{formatbuild}

Introducing these files in a \itxem{format} (with \ixem{INITEX}) is a means of
saving computer time and memory. Besides, if you include {\tt musixcpt.tex} in
your format, you will have a format compatible with \musictex\ and ---
provided you made the symmetrical format for \musictex\ --- you can compile
exactly the same source files with both \musictex\ and \musixtex, which is a
good means of finding whether some strange behaviour is specific to one
implementation of the other, or whether you made some general
mistake\footnote{Not all authors have the same opinion :-). But I was told,
that my opinion doesn't count, so forget it -- A.E.}...

\subsection{Starting from nil}
\begin{enumerate}
 \item Build up a file called \verb|musixtex.ini| with following content:\\
\begin{verbatim}
\input plain % or dcplain or eplain or see later a safer way of doing
\input musixtex
% here can you add your most needed files from extension lib
% musixcpt at very last !
\end{verbatim}
\verb|\def\fmtname{musixtex}\def\fmtversion{|{\tt\mxversion}\verb|}|
\verb|\dump|
 \item \verb|initex musixtex.ini|\footnote{depends on your implementation}.
 \item \verb|tex &musixtex| \ital{jobname}\footnote{depends on your
implementation}.
\end{enumerate}
\vfill

\subsection{Starting from your usual plain format}
\begin{enumerate}
 \item First, try to find --- on your favourite system --- whether \verb|tex|
is an executable routine, or a \verb|tex.bat| command in MS-DOS or a
\ital{shell} procedure under \unix.
 \item If \verb|tex| is a command try to find the ``{\tt initex}'' local
command: usually it is either \verb|initex| or \verb|tex -i|.
 \item Try to find the name of the ``plain \TeX'' format (usually posted
when \TeX ing anything).
 \item Then, \ital{mutatis mutandis}, assuming the ``{\tt initex}'' command
has the name \verb|initex| and the ``plain \TeX'' format is \verb|plain|, run
the shell command:

 \medskip
 \verb|initex  \&plain musixtex.ins|

 \medskip\noindent which will produce a format file {\tt musixtex.fmt} which
you shall put in the same directory  as the others formats (hoping you have
the access rights...). Note --- in \unix{} systems --- the backslash before
the \verb|&| which tells the system to consider this character as a member of
the command, not a batch execution indication. Once this is done, you can
\musixtex\ any score you have written using a command such as:

 \medskip
 \verb|tex \&musixtex my-score.tex|

 \medskip\noindent that is, specifying your new format {\tt musixtex.fmt}
instead of the usual {\tt plain.fmt}.

 For \ixem{MS-DOS}/{\tt emTeX} users the format building command is:

 \verb|tex386 -i &plain musixtex.ins|

 \noindent (you can change \verb|plain| into \verb|dc-plain| or any other
plain-like format you have) then:

 \verb|copy musixtex.fmt \emtex\btexfmts\*.*|

 \noindent and the {\tt musixtex.bat} command can be

% It makes no sense to state -mt20000, perhaps this is useful for MusicTeX,
% (it uses hyphenation to break a line) but not for MusiXTeX (it uses musixflx)
\begin{quote}\begin{verbatim}
if exist %1.tex goto tex
goto end

:tex
if exist %1.mx1 del %1.mx1
if exist %1.mx2 del %1.mx2
tex386 -mt20000 &musixtex %1 %2 %3 %4 %5 %6 %7 %8 %9

if errorlevel 2 goto end
musixflx %1

if errorlevel 1 goto end
tex386 -mt20000 &musixtex %1 %2 %3 %4 %5 %6 %7 %8 %9

:end
 \end{verbatim}\end{quote}
\end{enumerate}

\begin{flushright}\it
Don't expect a perfect package or miracles.\\
There will be enough unexpected miracles.\\[\smallskipamount]
{\sc Eberhard Mattes}
\end{flushright}

\chapter{Examples}
 Due to compatibility problems with \LaTeX\ (used to produce this notice)
large examples must be \TeX -ed separately, i.e.\ using plain \TeX{} and not
\LaTeX. Therefore, the \musixtex\ future user is suggested to produce some of
the following examples and to look carefully at the way some special features
have been coded.

 When producing this examples, care should be taken about the fact
that several given files are supposed to be included (by means of
\keyindex{input}) in other files. Thus the only good files to be directly
\TeX-ed are those which begin with \verb|\input musixtex| or
 \verb|% \input musixtex|. This latter command is often commented out so that
the examples can be run either using a \musixtex\ format including {\tt
musixcpt.tex} and {\tt musixsty.tex} --- namely the format generated by {\tt
musixtex.ins} --- or using a \musictex\ format including {\tt musictrp.tex},
{\tt musicvbm.tex} and {\tt musicsty.tex} --- namely the format generated by
{\tt musixtex.ins}.

In addition, it must be noted that most DVI previewers and laser printers have
their origin at one inch below and one inch right of the right upper corner
of the paper, while the musical examples have their upper left significant
corner only at one centimeter right and below the left top of the paper.
Therefore, special parameters have to be given to the DVI transcription
programs unless special \keyindex{hoffset} and \keyindex{voffset} \TeX\
commands are introduced within the source \TeX\ text.

\section{Clean \musixtex\ examples}

\begin{itemize}
 \item{\tt xavemari.tex} to get the ``M\'editation'' (alias ``Ave Maria'') by
Charles {\sc Gounod} for organ and violin or song in clean \musixtex-input.
\index{Gounod, C.@{\sc Gounod, C.}}
 \item{\tt traeumer.tex} to get the famous ``Tr\"aumerei'' by
Robert {\sc Schumann} for piano, in genuine \musixtex-input but with some
additions to perform ascending \itxem{crescendos}.
\index{Schumann, R.@{\sc Schumann, R.}}
 \item{\tt parnasum.tex} to get the first page of ``Doctor gradus ad
Parnassum'' by Claude {\sc Debussy} for piano.\index{Debussy,
C.@{\sc Debussy, C.}}
 \item{\tt glorias.tex} to get a local melody for the French version of
\ital{Gloria in excelsis Deo}, showing use of lyrics commands. {\tt
gloriab.tex} is the same, with organ accompaniment.
 \item Other clean \musixtex\ examples seem to be no more compatible with
the present version, but they should be updated in a near future.
\end{itemize}

These examples are packed (zipped) in the {\ttxem{musixexa.zip}} file of the
\musixtex\ distribution.

\section{Nearly compatible \musictex\ examples}

These are examples using not only {\tt musixtex} but also {\tt musixcpt} and
{\tt musixsty}, which means their coding is easily understandable for
\musictex{} previous users. However, they cannot be run as is with \musictex,
since a few specific commands have been included, either for spacing, or for
oblique slurs. They are given in {\tt musixexa.zip}, for example:

 \begin{itemize}
 \item {\tt gymnoman}~: an imitation of Erik {\sc Satie}'s
\ital{Gymnop\'edies}\index{Satie, E.@{\sc Satie, E.}},
 \item {\tt canticor.tex}/{\tt canticox.tex}~:
a famous tune by Georg Friedrich {\sc Haendel}\index{Haendel, G.F.@{\sc
Haendel, G.F.}},
 \item {\tt ilfaitda.tex}/{\tt ilfaitdx.tex}~: a famous choral by J.-S.
{\sc Bach}\index{Bach, J.S.@{\sc Bach, J.S.}} adapted with French lyrics for
French churches,
 \item {\tt widor\_20.tex}~: the famous toccata for organ by Charles-Marie {\sc
Widor}\index{Widor, C.M.@{\sc Widor, C.M.}} in 10 pages (more compact than
commercial editions, and easier to play if nobody can turn the pages), and
{\tt widor\_16.tex} which is the same in 16~pt size, i.e. more compact.
 \item{\tt souveni*.tex}~: a nice French tune of the fifties, by Oreste {\sc
Rossi} and Fernand {\sc Capitani} with several transpositions.
 \item {\tt marcello.tex}~: the adagio of Benedetto {\sc
Marcello}\index{Marcello, B.@{\sc Marcello, B.}}'s oboe concerto, transcribed
for organ.
 \item {\tt hymnepas.tex}~: a modern Eastern canticle by A. {\sc Gouzes} and
{\sc Palestrina}, showing heavy use of \keyindex{hardlyrics} for choral
music.\index{Gouzes, A.@{\sc Gouzes, A.}}

 \end{itemize}

\section{Compatible \musictex\ examples}

They are all the examples provided in the \musictex\ distribution. To run them
the easiest way is to have both a {\tt musictex} and a {\tt musixtex} format as
described in \ref{formatbuild}. Otherwise, insert

 \verb|\input musixtex|

 \verb|\input musixcpt|

 \verb|\input musixsty|

 \noindent at the beginning of each example, and \TeX\ it.

 \section{Looking at examples before installing \musixtex}

 Most of the above examples (and some others) are posted, ready to print, as
PostScript files in:
 \begin{itemize}
 \item {\tt ftp://hprib.lps.u-psud.fr/pub/music\_scores.zip/*/*/*.zip} (zipped
PostScript 300dpi files)
 \item {\tt ftp://hprib.lps.u-psud.fr/pub/music\_scores.gz/*/*/*.ps.gz} (gzipped
PostScript 300dpi files)
 \end{itemize}

 Printing them on any PostScript printer (needs A4 paper) is a good means of
getting an overview of \musixtex's capabilities.


\printindex

\clearpage
{\parindent0pt
\hoffset-15.4mm
\voffset-42mm
\hsize190mm
\vsize285mm
\parskip0pt plus 2pt
% not fine, not clean, but works
% !!! don't look at this !!!
%>>>
\makeatletter
\textheight\vsize
\@colht\vsize
\@colroom\vsize
\makeatother
%<<<
\let\MYTEMP\addcontentsline
\def\addcontentsline#1#2#3{}
\chapter{}
\let\addcontentsline\MYTEMP
\addcontentsline{toc}{chapter}{%
  \protect\numberline\thechapter{Summary of denotations}}
\vglue-20mm
\centerline{\bigfont Pitches}
\medskip
\tentt
\def\bs{\tentt\char92}
\setclef1\bass
\afterruleskip2pt
\startpiece
%
% Pitches
%
\addspace\afterruleskip
\notes\wh{`ABCDEFG}\wh{!ABCDEFG}\wh{HIJKLMNabcde}\off{-26\noteskip}%
  \zchar{14}{\llap`A}\sk
  \zchar{14}{\llap`B}\sk
  \zchar{14}{\llap`C}\sk
  \zchar{14}{\llap`D}\sk
  \zchar{14}{\llap`E}\sk
  \zchar{14}{\llap`F}\sk
  \zchar{14}{\llap`G}\sk
  \zchar{14}A\sk
  \zchar{14}B\sk
  \zchar{14}C\sk
  \zchar{14}D\sk
  \zchar{14}E\sk
  \zchar{14}F\sk
  \zchar{14}G\sk
  \zchar{-5}{\llap'A}\zchar{14}H\sk
  \zchar{-5}{\llap'B}\zchar{14}I\sk
  \zchar{-5}{\llap'C}\zchar{14}J\sk
  \zchar{-5}{\llap'D}\zchar{14}K\sk
  \zchar{-5}{\llap'E}\zchar{14}L\sk
  \zchar{-5}{\llap'F}\zchar{14}M\sk
  \zchar{-5}{\llap'G}\zchar{14}N\sk
  \zchar{14}a\sk
  \zchar{14}b\sk
  \zchar{14}c\sk
  \zchar{14}d\sk
  \zchar{14}e\sk\en
\stoppiece\vskip-3\Interligne\setclef1\treble\contpiece
\notes\wh{abcdefg}\wh{hijklmno}\wh{pqrstuvwxyz}\off{-26\noteskip}%
  \zchar{-8}a\sk
  \zchar{-8}b\sk
  \zchar{-8}c\sk
  \zchar{-8}d\sk
  \zchar{-8}e\sk
  \zchar{-8}f\sk
  \zchar{-8}g\sk
  \zchar{-8}h\zchar{-4}{\llap'a}\sk
  \zchar{-8}i\zchar{-4}{\llap'b}\sk
  \zchar{-8}j\zchar{-4}{\llap'c}\sk
  \zchar{-8}k\zchar{-4}{\llap'd}\sk
  \zchar{-8}l\zchar{-4}{\llap'e}\sk
  \zchar{-8}m\zchar{-4}{\llap'f}\sk
  \zchar{-8}n\zchar{-4}{\llap'g}\sk
  \zchar{-8}o\zchar{-4}{\llap{'\kern-2pt'}a}\sk
  \zchar{-8}p\zchar{-4}{\llap{'\kern-2pt'}b}\sk
  \zchar{-8}q\zchar{-4}{\llap{'\kern-2pt'}c}\sk
  \zchar{-8}r\zchar{-4}{\llap{'\kern-2pt'}d}\sk
  \zchar{-8}s\zchar{-4}{\llap{'\kern-2pt'}e}\sk
  \zchar{-8}t\zchar{-4}{\llap{'\kern-2pt'}f}\sk
  \zchar{-8}u\zchar{-4}{\llap{'\kern-2pt'}g}\sk
  \zchar{-8}v\zchar{-4}{\llap{'\kern-2pt'\kern-2pt'}a}\sk
  \zchar{-8}w\zchar{-4}{\llap{'\kern-2pt'\kern-2pt'}b}\sk
  \zchar{-8}x\zchar{-4}{\llap{'\kern-2pt'\kern-2pt'}c}\sk
  \zchar{-8}y\zchar{-4}{\llap{'\kern-2pt'\kern-2pt'}d}\sk
  \zchar{-8}z\zchar{-4}{\llap{'\kern-2pt'\kern-2pt'}e}\sk\en
\stoppiece
\medskip
\centerline{\bigfont Notes, Accidentals, Accents, Clefs and Rests}
\medskip
%
% Notes& Accidentals
%
\contpiece
\Notes
  \zchar{-4}{Accidentals:}%
  \zchar9{\bs zmaxima}\zmaxima i\sk
  \zchar{12}{\bs zlonga}\zlonga i\sk
  \zchar9{\bs zbreve}\zbreve i\sk
  \zchar{12}{\bs zwq}\zwq i\sk
  \zchar{12}{\bs wh}\wh i%
  \zchar{12}{\bs hu}\zchar{-4}>\hu{>f}%
  \zchar{12}{\bs hl}\loff{\zchar{-4}{\bs cdsh}}\cdsh l\hl l%
  \zchar{12}{\bs qu}\zchar{-4}\^\qu{^f}%
  \zchar{12}{\bs ql}\loff{\zchar{-4}{\bs csh}}\csh l\ql l%
  \zchar{12}{\bs cu}\zchar{-4}=\cu{=f}%
  \zchar{12}{\bs cl}\loff{\zchar{-4}{\bs cna}}\cna l\cl l%
  \zchar{12}{\bs ccu}\zchar{-4}\_\ccu{_f}%
  \zchar{12}{\bs ccl}\loff{\zchar{-4}{\bs cfl}}\cfl l\ccl l%
  \zchar{12}{\bs cccu}\zchar{-4}<\cccu{<f}%
  \zchar{12}{\bs cccl}\loff{\zchar{-4}{\bs cdfl}}\cdfl l\cccl l%
\multnoteskip{1.2}%
  \zchar{12}{\bs ccccu}\ccccu f%
  \zchar{12}{\bs ccccl}\ccccl l%
\multnoteskip{.8}%
  \zchar{12}{\bs grcu}\grcu f%
  \zchar{12}{\bs grcl}\grcl l\en
\stoppiece
%
% various note heads
%
\contpiece
\Notes
\multnoteskip{1.1}%
  \zchar{10}{\bs dqu$^{123}$}%
    \zchar{-3}{\eightrm 1 musixdia.tex~~2 musixper.tex~~3 musixgre.tex%
                        ~~4 musixlit.tex~~5 musixext.tex}\dqu g%
  \zchar{10}{\bs yqu$^{123}$}\yqu g%
\multnoteskip{.9}%
  \zchar{10}{\bs dcqu$^2$}\dcqu g%
  \zchar{10}{\bs dhqu$^2$}\dhqu g%
  \zchar{10}{\bs doqu$^2$}\doqu g%
  \zchar{10}{\bs xqu$^2$}\xqu g%
  \zchar{10}{\bs oxqu$^2$}\oxqu g%
  \zchar{10}{\bs roqu$^2$}\roqu g%
  \zchar{10}{\bs tgqu$^2$}\tgqu f%
  \zchar{10}{\bs kqu$^2$}\kqu f%
  \zchar{10}{\bs squ$^3$}\squ g%
  \zchar{10}{\bs lsqu$^3$}\lsqu j%
  \zchar{10}{\bs rsqu$^3$}\rsqu k%
  \zchar{10}{\bs cqu$^4$}\cqu g%
  \zchar{10}{\bs cql$^4$}\cql k%
  \zchar{10}{\bs chu$^4$}\chu g%
  \zchar{10}{\bs chl$^4$}\chl k\en
%
% Pointed Notes and Accents
%
\stoppiece
\medskip
\contpiece
\Notes
  \zchar{-5}{\eightrm Accent on beam with prefix {\tt b} and beam reference
number instead of the pitch}%
  \zchar{13}{\bs lpz}\lpz f\qu f%
  \zchar{13}{\bs upz}\upz l\ql l%
  \zchar{13}{\bs lsf}\lsf f\qu f%
  \zchar{13}{\bs usf}\usf l\ql l%
  \zchar{13}{\bs lst}\lst f\qu f%
  \zchar{13}{\bs ust}\ust l\ql l%
  \zchar{13}{\bs lppz}\lppz f\qu f%
  \zchar{13}{\bs uppz}\uppz l\ql l%
  \zchar{13}{\bs lsfz}\lsfz f\qu f%
  \zchar{13}{\bs usfz}\usfz l\ql l%
  \zchar{13}{\bs lpzst}\lpzst f\qu f%
  \zchar{13}{\bs upzst}\upzst l\ql l%
  \zchar{16}{\bs downbow}\zchar9\downbow\ql l%
  \zchar{13}{\bs upbow}\zchar9\upbow\ql l%
  \zchar{16}{\bs flageolett}\flageolett l\ql l%
  \zchar{13}{\bs whp}\whp i%
  \zchar{13}{\bs qupp}\qupp h\en
\stoppiece
\medskip
%
% clefs
%
\setclefsymbol1\empty \nostartrule\contpiece
\NOtes
  \zchar{13}{\bs trebleclef}\zchar0\trebleclef\sk
  \zchar9{\bs altoclef}\zchar0\altoclef\sk
  \zchar{13}{\bs bassclef}\zchar0\bassclef\sk
  \zchar9{\bs smalltrebleclef}\zchar0\smalltrebleclef\sk
  \zchar{13}{\bs smallaltoclef}\zchar0\smallaltoclef\sk
  \zchar9{\bs smallbassclef}\zchar0\smallbassclef\sk
  \zchar{13}{\bs drumclef$^2$}\zchar0\drumclef\sk
  \zchar9{\bs gregorianCclef$^3$}\zchar0\gregorianCclef\sk
  \zchar{13}{\bs gregorianFclef$^3$}\zchar0\gregorianFclef\sk
  \zchar9{\bs oldGclef$^4$}\zchar0\oldGclef\sk\en
\zstoppiece\smallskip
%
% Rests
%
\resetclefsymbols\startrule\contpiece
\NOtes
\multnoteskip{.5}%
  \zchar{13}{\bs qqs}\qqs
  \zchar{13}{\bs hs}\hs
  \zchar{13}{\bs qs}\qs
  \zchar{13}{\bs ds}\ds
  \zchar{13}{\bs qp}\qp
\multnoteskip2%
  \zchar{13}{\bs hpause}\hpause
  \zchar{13}{\bs hpausep}\hpausep
  \zchar{9}{\bs lifthpause}\roff{\lifthpause5}\sk
  \zchar{13}{\bs pause}\pause
  \zchar{13}{\bs pausep}\pausep
  \zchar{9}{\bs liftpause}\roff{\liftpause4}\sk
  \zchar{13}{\bs PAuse}\PAuse
  \zchar{13}{\bs PAUSe}\PAUSe
  \zchar{13}{\bs Hpause$^4$}\Hpause i{.8}\sk\en
\stoppiece\vskip-2\Interligne
%
\centerline{\bigfont Other Symbols}
\medskip
%
% more Symbols
%
\contpiece
\NOtes
  \zchar{14}{\bs Trille}\zchar{-4}{\bs allabreve}\Trille n1%
    \zchar0\allabreve\sk
  \zchar{14}{\bs trille}\zchar{-4}{\bs meterC}\trille n1\zchar0\meterC\sk
  \zchar{14}{\bs shake}\zchar{-4}{\bs reverseC}\shake n\zchar0\reverseC\sk
  \zchar{14}{\bs Shake}\zchar{-4}{\bs reverseallabreve}\Shake n%
    \zchar0\reverseallabreve\sk
  \zchar{14}{\bs mordent}\mordent n\sk
  \zchar{14}{\bs Mordent}\Mordent n\zchar{-4}{\bs meterplus}%
    \zchar0{\meterfrac{3\meterplus2\meterplus3}8}\sk
\multnoteskip{.66}%
  \zchar{14}{\bs turn}\turn n\sk
\multnoteskip{1.25}%
  \zchar{14}{\bs backturn}\backturn n\zchar{-4}{\bs duevolte}\duevolte\sk
  \zchar{14}{\bs Shakel}\Shakel n\sk
  \zchar{14}{\bs Shakesw}\Shakesw n\zchar{-4}{\bs l[r]par}%
    \lpar f\rpar f{\stemlength4\qu f}%
  \zchar{14}{\bs Shakene}\Shakene n\sk
  \zchar{14}{\bs Shakenw}\Shakenw n\sk\en
\stoppiece
\medskip
%
% again
%
\contpiece
\NOtes\zchar9{\bs metron}\zchar{13}{\metron\qu{99}}\sk\en
\setvoltabox1\bar
\NOtes\loffset2{\zchar{17}{\bs setvoltabox}}\en
\setvolta2\rightrepeat
\NOtes\loff{\zchar{17}{\bs setvolta}}\en
\doublebar
\notes\zchar{17}{\kern-\afterruleskip\bs coda}\coda n\en\bar
\notes\zchar{17}{\kern-\afterruleskip\bs Coda}\Coda n\en
\NOtes
  \zchar{17}{\bs segno}\segno n\sk
  \zchar{17}{\kern-2\afterruleskip\bs Segno}\Segno\hsk
  \zchar{17}{\bs caesura}\sk\caesura
  \zchar{17}{\bs cbreath}\cbreath\sk
\multnoteskip{.66}%
  \zchar{17}{\bs PED}\PED\sk
  \zchar{17}{\bs sPED}\sPED\sk
  \zchar{17}{\bs DEP}\DEP\sk
  \zchar{17}{\bs sDEP}\sDEP\sk\en
\stoppiece
\medskip
%
% and again ...
%
\contpiece
\Notes
  \zchar{17}{\bs fermataup}\fermataup l%
    \zchar{-8}{\bs fermatadown}\fermatadown f{\stemlength3\ql i}%
  \zchar{13}{\bs Fermataup}\Fermataup l%
    \zchar{-4}{\kern8pt\bs Fermatadown}\Fermatadown f\wh i%
  \loff{\zchar{17}{\bs arpeggio d5}}\arpeggio d5\sk
\multnoteskip{.66}%
  \loff{\zchar{13}{\bs bracket}}\bracket e{10}\zq n\ql e\en
\notes\stemlength3%
  \zchar{17}{\bs uptrio}\uptrio{11}16\ql l\ql n\bsk\bsk
  \zchar{-8}{\bs downtrio}\downtrio{-5}17\qu c\qu e\en
\Notes
  \zchar{17}{\bs octfinup}\octfinup n{.8}%
    \zchar{-4}{\bs octfindown}\octfindown K{.8}\sk\hsk
  \zchar{17}{\bs slide$^5$}%
    \slide i58\slide i57\slide i56\slide i55\slide i54%
    \slide i53\slide i52\slide i51\slide i5{-1}%
    \slide i5{-2}\slide i5{-3}\slide i5{-4}\slide i5{-5}%
    \slide i5{-6}\slide i5{-7}\slide i5{-8}\sk\en
\leftrepeat
\Notes
  \loffset2{\zchar{-4}{\bs leftrepeat}}%
  \boxitsep=2pt\zchar{17}{\bs boxit A}\zchar9{\boxit A}\en
\leftrightrepeat
\Notes
  \loffset2{\zchar{-8}{\bs leftrightrepeat}}%
  \zchar{17}{\bs circleit B}\uptext{\circleit B}\en
\rightrepeat
\NOtes
  \loffset2{\zchar{-4}{\bs rightrepeat}}\en
\endpiece\eject}%
\endmuflex
\end{document}