% LAMS1.MF      VERSION 1.0
% COPYRIGHT (C) 1989 BY THE TEXPLORATORS CORPORATION
% ALL RIGHTS RESERVED

if unknown cmbase: input cmbase fi
font_identifier:="LAMS"; font_size 10pt#;

u#:=20/36pt#;      % unit width
width_adj#:=0pt#;    % width adjustment for certain characters
serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
cap_serif_fit#:=5/36pt#;  % extra sidebar near uppercase serifs
letter_fit#:=0pt#;    % extra space added to all sidebars

body_height#:=270/36pt#;  % height of tallest characters
asc_height#:=360/36pt#;    % height of lowercase ascenders
cap_height#:=246/36pt#;    % height of caps
fig_height#:=232/36pt#;    % height of numerals
x_height#:=155/36pt#;    % height of lowercase without ascenders
math_axis#:=90/36pt#;    % axis of symmetry for math symbols
bar_height#:=87/36pt#;    % height of crossbar in lowercase e
comma_depth#:=70/36pt#;    % depth of comma below baseline
desc_depth#:=0/36pt#;    % depth of lowercase descenders

crisp#:=8/36pt#;    % diameter of serif corners
tiny#:=8/36pt#;      % diameter of rounded corners
fine#:=7/36pt#;      % diameter of sharply rounded corners
thin_join#:=7/36pt#;    % width of extrafine details
hair#:=9/36pt#;      % lowercase hairline breadth
stem#:=24/36pt#;    % lowercase stem breadth
curve#:=29/36pt#;    % lowercase curve breadth
ess#:=27/36pt#;      % breadth in middle of lowercase s
flare#:=32/36pt#;    % diameter of bulbs or breadth of terminals
dot_size#:=38/36pt#;    % diameter of dots
cap_hair#:=11/36pt#;    % uppercase hairline breadth
cap_stem#:=30/36pt#;    % uppercase stem breadth
cap_curve#:=35/36pt#;    % uppercase curve breadth
cap_ess#:=33/36pt#;    % breadth in middle of uppercase s
rule_thickness#:=.4pt#;    % thickness of lines in math symbols

dish#:=1/36pt#;      % amount erased at top or bottom of serifs
bracket#:=20/36pt#;    % vertical distance from serif base to tangent
jut#:=30/36pt#;      % protrusion of lowercase serifs
cap_jut#:=37/36pt#;    % protrusion of uppercase serifs
beak_jut#:=10/36pt#;    % horizontal protrusion of beak serifs
beak#:=70/36pt#;    % vertical protrusion of beak serifs
vair#:=8/36pt#;      % vertical diameter of hairlines
notch_cut#:=10pt#;    % maximum breadth above or below notches
bar#:=11/36pt#;      % lowercase bar thickness
slab#:=11/36pt#;    % serif and arm thickness
cap_bar#:=11/36pt#;    % uppercase bar thickness
cap_band#:=11/36pt#;    % uppercase thickness above/below lobes
cap_notch_cut#:=10pt#;    % max breadth above/below uppercase notches
serif_drop#:=4/36pt#;    % vertical drop of sloped serifs
stem_corr#:=1/36pt#;    % for small refinements of stem breadth
vair_corr#:=1/36pt#;    % for small refinements of hairline height
apex_corr#:=0pt#;    % extra width at diagonal junctions

o#:=8/36pt#;      % amount of overshoot for curves
apex_o#:=8/36pt#;    % amount of overshoot for diagonal junctions

slant:=0;      % tilt ratio $(\Delta x/\Delta y)$
fudge:=1;      % factor applied to weights of heavy characters
math_spread:=0;      % extra openness of math symbols
superness:=1/sqrt2;    % parameter for superellipses
superpull:=1/6;      % extra openness inside bowls
beak_darkness:=11/30;    % fraction of triangle inside beak serifs
ligs:=2;      % level of ligatures to be included

square_dots:=false;    % should dots be square?
hefty:=false;      % should we try hard not to be overweight?
serifs:=true;      % should serifs and bulbs be attached?
monospace:=false;    % should all characters have the same width?
variant_g:=true;    % should an italic-style g be used?
low_asterisk:=false;    % should the asterisk be centered at the axis?
math_fitting:=true;    % should math-mode spacing be used?

mode_setup; font_setup;
autorounding:=0;

font_slant slant; font_x_height 0#; %x_height#;
font_quad 18u# if not monospace:+4letter_fit# fi;

% **********************************************
% Macros and character definitions.
% **********************************************

def Shaft (expr ChCode, ChHeightFrac)=

beginchar(ChCode,18u#,ChHeightFrac*18u#,0#);
adjust_fit(0,0); pickup crisp.nib;
x1=hround 0; x0=hround w;
y1=-d; y0=h;
numeric theta,delta; theta=angle(z0-z1); delta=3u++.24asc_height;
if abs(theta-45)<2.5: theta:=45; y1:=y0+x1-x0; fi % near-45$^\circ$ angle
pos1(rule_thickness,90+theta); pos2(1.5rule_thickness,90+theta);
pickup pencircle scaled rule_thickness;
draw z1--z0;
endchar;
enddef;

Shaft(0,1/6);
Shaft(13,1/5);
Shaft(26,1/4);
Shaft(39,1/3);
Shaft(52,2/5);
Shaft(65,1/2);
Shaft(78,3/5);
Shaft(91,2/3);
Shaft(104,3/4);

def DashedShaft (expr ChCode, ChHeightFrac)=

beginchar(ChCode,18u#,ChHeightFrac*18u#,0#);
adjust_fit(0,0); pickup crisp.nib;
x1= 0; x0=w;
y1=-d; y0=h;
numeric theta,delta; theta=angle(z0-z1); delta=3u++.24asc_height;
if abs(theta-45)<2.5: theta:=45; y1:=y0+x1-x0; fi % near-45$^\circ$ angle
pos1(rule_thickness,90+theta); pos2(1.5rule_thickness,90+theta);
x2=hround w;
y2=h;
%filldraw z2l---z1l{z1-z2}..{z2-z1}z1r---z2r{z2-z1}..{z1-z2}cycle;
pickup pencircle scaled rule_thickness;
draw z1--1/6z2;
draw 2/6z2--4/6z2;
draw 5/6z2--z2;
endchar;
enddef;

DashedShaft(1,1/6);
DashedShaft(14,1/5);
DashedShaft(27,1/4);
DashedShaft(40,1/3);
DashedShaft(53,2/5);
DashedShaft(66,1/2);
DashedShaft(79,3/5);
DashedShaft(92,2/3);
DashedShaft(105,3/4);


def UpperHead (expr ChCode, ChHeightFrac)=

beginchar(ChCode,18u#,ChHeightFrac*18u#,0#);
adjust_fit(0,0); pickup rule.nib;
x1=0; x0=w;
y1=-d; y0= h;
numeric theta; theta=angle(z0-z1);
pos1(rule_thickness,90+theta);
pos2(1.5rule_thickness,theta);
pos3(bar,theta); pos4(bar,theta);
z4=z0+ dir -(90+(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
z3=z0+ dir -(180+(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
z2l=z0;
z9=.381966[.5[z3,z4],z0];
pickup crisp.nib;
filldraw z2r..{z3-z9}z3r---{z9-z3}z3l..z2l--cycle;
filldraw z2r..{z4-z9}z4r---{z9-z4}z4l..z2l--cycle;
endchar;
enddef;


UpperHead(2,1/6);
UpperHead(15,1/5);
UpperHead(28,1/4);
UpperHead(41,1/3);
UpperHead(54,2/5);
UpperHead(67,1/2);
UpperHead(80,3/5);
UpperHead(93,2/3);
UpperHead(106,3/4);

def LowerHead (expr ChCode, ChHeightFrac)=

beginchar(ChCode,18u#,ChHeightFrac*18u#,0#);
adjust_fit(0,0); pickup rule.nib;
x1=w ; x0=0;
y1=h;  y0=-d;
numeric theta; theta=angle(z1-z0);
pos1(rule_thickness,-90+theta);
pos2(1.5rule_thickness,theta);
pos3(bar,theta); pos4(bar,theta);
z4=z0+ dir (90-(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
z3=z0+ dir -(45-theta) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
pos5(bar,90-(45-theta)); z5l=z0; pos6(bar,-(45-theta)); z6l=z0;
z2r=z0;
z9=.381966[.5[z3,z4],z0];
pickup crisp.nib;
filldraw z2r..{z3-z9}z3r---{z9-z3}z3l..z2l--cycle;
filldraw z2l..{z4-z9}z4l---{z9-z4}z4r..z2r--cycle;

endchar;
enddef;

LowerHead(3,1/6);
LowerHead(16,1/5);
LowerHead(29,1/4);
LowerHead(42,1/3);
LowerHead(55,2/5);
LowerHead(68,1/2);
LowerHead(81,3/5);
LowerHead(94,2/3);
LowerHead(107,3/4);



def UpperTopBarb (expr ChCode, ChHeightFrac)=
beginchar(ChCode,18u#,ChHeightFrac*18u#,0#);
adjust_fit(0,0); pickup crisp.nib;
x1=0; x0=w;
y1=-d; y0=h;
numeric theta; theta=angle(z0-z1);
pos1(rule_thickness,90+theta);
pos0(rule_thickness,90+theta);
pos2(1.5rule_thickness,theta);
pos3(bar,theta); pos4(bar,theta);
z4=z0+ dir -(90+(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
z3=z0+ dir -(180+(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
z2l=z0;
z9=.381966[.5[z3,z4],z0];
pickup crisp.nib;
filldraw z2r..{z3-z9}z3r---{z9-z3}z3l..z2l--cycle;
filldraw z2r{dir -(90-theta)}..{z1-z0}z0l--z2l--cycle;
endchar;
enddef;

UpperTopBarb(4,1/6);
UpperTopBarb(17,1/5);
UpperTopBarb(30,1/4);
UpperTopBarb(43,1/3);
UpperTopBarb(56,2/5);
UpperTopBarb(69,1/2);
UpperTopBarb(82,3/5);
UpperTopBarb(95,2/3);
UpperTopBarb(108,3/4);

def UpperBotBarb (expr ChCode, ChHeightFrac)=

beginchar(ChCode,18u#,ChHeightFrac*18u#,0#);
adjust_fit(0,0); pickup crisp.nib;
x1=0; x0=w;
y1=-d; y0=h;
numeric theta; theta=angle(z0-z1);
pos1(rule_thickness,90+theta);
pos0(rule_thickness,90+theta);
pos2(1.5rule_thickness,theta);
pos3(bar,theta); pos4(bar,theta);
z4=z0+ dir -(90+(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
z3=z0+ dir -(180+(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
z2l=z0;
z9=.381966[.5[z3,z4],z0];
pickup crisp.nib;
filldraw z2r..{z4-z9}z4r---{z9-z4}z4l..z2l--cycle;
filldraw z2r{dir (90+theta)}..{z1-z0}z0r--z2l--cycle;
endchar;
enddef;



UpperBotBarb(5,1/6);
UpperBotBarb(18,1/5);
UpperBotBarb(31,1/4);
UpperBotBarb(44,1/3);
UpperBotBarb(57,2/5);
UpperBotBarb(70,1/2);
UpperBotBarb(83,3/5);
UpperBotBarb(96,2/3);
UpperBotBarb(109,3/4);


def LowerTopBarb (expr ChCode, ChHeightFrac)=

beginchar(ChCode,18u#,ChHeightFrac*18u#,0#);
adjust_fit(0,0); pickup crisp.nib;
x1=w ; x0=0;
y1=h;  y0=-d;
numeric theta; theta=angle(z1-z0);
pos1(rule_thickness,90+theta);
pos0(rule_thickness,90+theta);
pos2(1.5rule_thickness,theta);
pos3(bar,theta); pos4(bar,theta);
z4=z0+ dir (90-(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
z3=z0+ dir -(45-theta) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
pos5(bar,90-(45-theta)); z5l=z0; pos6(bar,-(45-theta)); z6l=z0;
z2r=z0;
z9=.381966[.5[z3,z4],z0];
pickup crisp.nib;
filldraw z2r..{z4-z9}z4r---{z9-z4}z4l..z2l--cycle;
filldraw z2l{dir -(90-theta)}..{z1-z0}z0l--z2r--cycle;
endchar;
enddef;

LowerTopBarb(6,1/6);
LowerTopBarb(19,1/5);
LowerTopBarb(32,1/4);
LowerTopBarb(45,1/3);
LowerTopBarb(58,2/5);
LowerTopBarb(71,1/2);
LowerTopBarb(84,3/5);
LowerTopBarb(97,2/3);
LowerTopBarb(110,3/4);

def LowerBotBarb (expr ChCode, ChHeightFrac)=

beginchar(ChCode,18u#,ChHeightFrac*18u#,0#);
adjust_fit(0,0); pickup crisp.nib;
x1=w ; x0=0;
y1=h;  y0=-d;
numeric theta,delta;theta=angle(z1-z0);
pos1(rule_thickness,90+theta);
pos0(rule_thickness,90+theta);
pos2(1.5rule_thickness,theta);
pos3(bar,theta); pos4(bar,theta);
z4=z0+ dir (90-(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
z3=z0+ dir -(45-theta) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
pos5(bar,90-(45-theta)); z5l=z0; pos6(bar,-(45-theta)); z6l=z0;
z2r=z0;
z9=.381966[.5[z3,z4],z0];
pickup crisp.nib;
filldraw z2r..{z3-z9}z3r---{z9-z3}z3l..z2l--cycle;
filldraw z2l{dir (90+theta)}..{z1-z0}z0r--z2r--cycle;
endchar;
enddef;

LowerBotBarb(7,1/6);
LowerBotBarb(20,1/5);
LowerBotBarb(33,1/4);
LowerBotBarb(46,1/3);
LowerBotBarb(59,2/5);
LowerBotBarb(72,1/2);
LowerBotBarb(85,3/5);
LowerBotBarb(98,2/3);
LowerBotBarb(111,3/4);

def LowerTopHook (expr ChCode, ChHeightFrac)=
compute_spread(.45x_height#,.55x_height);
beginchar(ChCode,18u#,ChHeightFrac*18u#,0#);
adjust_fit(0,0); pickup crisp.nib;
x1=w ; x0=0;
y1=h;  y0=-d;
numeric theta,delta; theta=angle(z1-z0); delta=3u++.24asc_height;
if abs(theta-45)<2.5: theta:=45; y1:=y0+x1-x0; fi % near-45$^\circ$ angle
pos1(rule_thickness,-90+theta);
pos2(1.5rule_thickness,theta);
pos3(bar,theta); pos4(bar,theta);
z4=z0+ dir (90+theta) xscaled spread yscaled spread;
%dir (90-theta) xscaled (delta+eps) yscaled (delta+eps);
%z3=z0+ dir -(45-theta) xscaled (delta+eps) yscaled (delta+eps);
pos5(bar,90-(45-theta)); z5l=z0; pos6(bar,-(45-theta)); z6l=z0;
z2l=z0;
z9=.381966[.5[z3,z4],z0];
pickup rule.nib;
z40= 1/2[z0,z4] + dir (180+theta) xscaled 2.5u yscaled 2.5u;
draw z0{z0-z1}..{z4-z0}z40..{z1-z0}z4;
%penstroke z2e..{z4-z9}z4e;
endchar;
enddef;

LowerTopHook(8,1/6);
LowerTopHook(21,1/5);
LowerTopHook(34,1/4);
LowerTopHook(47,1/3);
LowerTopHook(60,2/5);
LowerTopHook(73,1/2);
LowerTopHook(86,3/5);
LowerTopHook(99,2/3);
LowerTopHook(112,3/4);

def LowerBotHook (expr ChCode, ChHeightFrac)=
compute_spread(.45x_height#,.55x_height);
beginchar(ChCode,18u#,ChHeightFrac*18u#,0#);
adjust_fit(0,0); pickup crisp.nib;
x1=w ; x0= 0;
y1=h;  y0=-d;
numeric theta,delta; theta=angle(z1-z0); delta=3u++.24asc_height;
if abs(theta-45)<2.5: theta:=45; y1:=y0+x1-x0; fi % near-45$^\circ$ angle
pos1(rule_thickness,-90+theta);
pos2(1.5rule_thickness,theta);
pos3(bar,theta); pos4(bar,theta);
z4=z0+ dir -(90-theta) xscaled spread yscaled spread;
%dir (90-theta) xscaled (delta+eps) yscaled (delta+eps);
%z3=z0+ dir -(45-theta) xscaled (delta+eps) yscaled (delta+eps);
pos5(bar,90-(45-theta)); z5l=z0; pos6(bar,-(45-theta)); z6l=z0;
z2l=z0;
z9=.381966[.5[z3,z4],z0];
z40= 1/2[z0,z4] + dir (180+theta) xscaled 2.5u yscaled 2.5u;
pickup rule.nib;
draw z0{z0-z1}..{z4-z0}z40..{z1-z0}z4;
%penstroke z2e..{z4-z9}z4e;

endchar;
enddef;

LowerBotHook(9,1/6);
LowerBotHook(22,1/5);
LowerBotHook(35,1/4);
LowerBotHook(48,1/3);
LowerBotHook(61,2/5);
LowerBotHook(74,1/2);
LowerBotHook(87,3/5);
LowerBotHook(100,2/3);
LowerBotHook(113,3/4);



def UpperTopHook (expr ChCode, ChHeightFrac)=

beginchar(ChCode,18u#,ChHeightFrac*18u#,0#);
adjust_fit(0,0); pickup crisp.nib;
x1= 0;  x0=(w);
y1=-d; y0=h;
numeric theta,delta; theta=angle(z0-z1); delta=3u++.24asc_height;
if abs(theta-45)<2.5: theta:=45; y1:=y0+x1-x0; fi % near-45$^\circ$ angle
pos1(rule_thickness,90+theta);
pos2(1.5rule_thickness,theta);
pos3(bar,theta); pos4(bar,theta);
z4=z0+ dir (90+theta) xscaled (spread) yscaled (spread);
%z3=z0+ dir -(180+(45-theta)) xscaled (delta+eps) yscaled (delta+eps);
z2r=z0;
z9=.381966[.5[z3,z4],z0];
%penstroke z2e..{z3-z9}z3e;
z40= 1/2[z0,z4] + dir theta xscaled 2.5u yscaled 2.5u;
pickup rule.nib;
draw z0{z0-z1}..{z4-z0}z40..{z1-z0}z4;
endchar;
enddef;

UpperTopHook(10,1/6);
UpperTopHook(23,1/5);
UpperTopHook(36,1/4);
UpperTopHook(49,1/3);
UpperTopHook(62,2/5);
UpperTopHook(75,1/2);
UpperTopHook(88,3/5);
UpperTopHook(101,2/3);
UpperTopHook(114,3/4);


def UpperBotHook (expr ChCode, ChHeightFrac)=

beginchar(ChCode,18u#,ChHeightFrac*18u#,0#);
adjust_fit(0,0); pickup crisp.nib;
x1= 0; x0=w;
y1=-d; y0=h;
numeric theta,delta; theta=angle(z0-z1); delta=3u++.24asc_height;
if abs(theta-45)<2.5: theta:=45; y1:=y0+x1-x0; fi % near-45$^\circ$ angle
pos1(rule_thickness,90+theta);
pos2(1.5rule_thickness,theta);
pos3(bar,theta); pos4(bar,theta);
z4=z0+ dir -(90-theta) xscaled (spread) yscaled (spread);
%z3=z0+ dir -(180+(45-theta)) xscaled (delta+eps) yscaled (delta+eps);
z2r=z0;
z9=.381966[.5[z3,z4],z0];
z40= 1/2[z0,z4] + dir theta xscaled 2.5u yscaled 2.5u;
%penstroke z2e..{z3-z9}z3e;

pickup rule.nib;
draw z0{z0-z1}..{z4-z0}z40..{z1-z0}z4;
endchar;
enddef;
UpperBotHook(11,1/6);
UpperBotHook(24,1/5);
UpperBotHook(37,1/4);
UpperBotHook(50,1/3);
UpperBotHook(63,2/5);
UpperBotHook(76,1/2);
UpperBotHook(89,3/5);
UpperBotHook(102,2/3);
UpperBotHook(115,3/4);



def Squiggle (expr ChCode, ChHeightFrac)=

beginchar(ChCode,18u#,ChHeightFrac*18u#,0#);
adjust_fit(0,0);
x0= 0; x1=w;
y0=-d; y1=h;
numeric theta,delta; theta=angle(z1-z0);
delta=3u;
z2=.5/6[z0,z1];
z8=5.5/6[z0,z1];
z3=1/6[z0,z1] + dir (90+theta) xscaled (delta+eps) yscaled (delta+eps);
z5=3/6[z0,z1] + dir (90+theta) xscaled (delta+eps) yscaled (delta+eps);
z7=5/6[z0,z1] + dir (90+theta) xscaled (delta+eps) yscaled (delta+eps);
z4=2/6[z0,z1] + dir -(90-theta) xscaled (delta+eps) yscaled (delta+eps);
z6=4/6[z0,z1] + dir -(90-theta) xscaled (delta+eps) yscaled (delta+eps);

pickup pencircle scaled rule_thickness;
draw z0--z2--z3--z4--z5--z6--z7--z8--z1;
endchar;
enddef;

Squiggle(12,1/6);
Squiggle(25,1/5);
Squiggle(38,1/4);
Squiggle(51,1/3);
Squiggle(64,2/5);
Squiggle(77,1/2);
Squiggle(90,3/5);
Squiggle(103,2/3);
Squiggle(116,3/4);

def RevShaft (expr ChCode,ChWidthFrac,ChDepthFrac)=

beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
adjust_fit(0,0); pickup crisp.nib;
x1= 0; x0=(w);
y1=h; y0=-d;
pickup pencircle scaled rule_thickness;
draw z1--z0;
endchar;
enddef;

RevShaft(117,1/6,1);

def RevDashedShaft (expr ChCode, ChWidthFrac, ChDepthFrac)=

beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
adjust_fit(0,0); pickup crisp.nib;
x1= 0; x0=(w);
y1=h; y0=-d;
numeric theta,delta; theta=angle(z0-z1); delta=3u++.24asc_height;
if abs(theta-45)<2.5: theta:=45; y1:=y0+x1-x0; fi % near-45$^\circ$ angle
pos1(rule_thickness,90+theta); pos2(1.5rule_thickness,90+theta);
x2= w;
y2=-d;

%filldraw z2l---z1l{z1-z2}..{z2-z1}z1r---z2r{z2-z1}..{z1-z2}cycle;
pickup pencircle scaled rule_thickness;
draw z1--1/6[z1,z2];
draw 2/6[z1,z2]--4/6[z1,z2];
draw 5/6[z1,z2]--z2;
endchar;
enddef;


RevDashedShaft(118,1/6,1);

beginchar(119,0,math_axis#,0);
adjust_fit(0,0); pickup rule.nib;
x0=0;
y0=y2=math_axis;
x2r=0;   % was z2l
pos2(1.5rule_thickness,180);
pos3(bar,180); pos4(bar,180);
z4=z0+ dir (180-45) xscaled ((3u++.24asc_height)+eps-rule_thickness) yscaled ((3u++.24asc_height)+eps-rule_thickness);
z3=z0+ dir (180+45) xscaled ((3u++.24asc_height)+eps-rule_thickness) yscaled ((3u++.24asc_height)+eps-rule_thickness);
z9=.381966[.5[z3,z4],z2];
pickup crisp.nib;
filldraw z2r..{z3-z9}z3r---{z9-z3}z3l..z2l--cycle;
filldraw z2r..{z4-z9}z4r---{z9-z4}z4l..z2l--cycle;
endchar;

beginchar(120,0,math_axis#,0);
adjust_fit(0,0); pickup rule.nib;
x0=0;
y0=math_axis;
pos2(1.5rule_thickness,0);
pos3(bar,0); pos4(bar,0);
z4=z0+ dir -45 xscaled ((3u++.24asc_height)+eps-rule_thickness) yscaled ((3u++.24asc_height)+eps-rule_thickness);
z3=z0+ dir 45 xscaled ((3u++.24asc_height)+eps-rule_thickness) yscaled ((3u++.24asc_height)+eps-rule_thickness);
z2r=z0;  %was z2l
z9=.381966[.5[z3,z4],z0];
pickup crisp.nib;
filldraw z2r..{z3-z9}z3r---{z9-z3}z3l..z2l--cycle;
filldraw z2r..{z4-z9}z4r---{z9-z4}z4l..z2l--cycle;

endchar;

beginchar(121,0,math_axis#,0);
adjust_fit(0,0); pickup rule.nib;
x0=0;
y0=math_axis;
pos1(rule_thickness,90);
pos2(1.5rule_thickness,180);
pos0(rule_thickness,90);
pos3(bar,180); pos4(bar,180);
z4=z0+ dir (180-45) xscaled ((3u++.24asc_height)+eps-rule_thickness) yscaled ((3u++.24asc_height)+eps-rule_thickness);
z3=z0+ dir (180+45) xscaled ((3u++.24asc_height)+eps-rule_thickness) yscaled ((3u++.24asc_height)+eps-rule_thickness);
z2r=z0; %was z2l
z9=.381966[.5[z3,z4],z0];
pickup crisp.nib;
filldraw z2r..{z4-z9}z4r---{z9-z4}z4l..z2l--cycle;
filldraw z2l{down}..{left}z0l--z2r--cycle;
endchar;


beginchar(122,0,math_axis#,0);
adjust_fit(0,0); pickup rule.nib;
x0=0;
y0=math_axis;
pos2(1.5rule_thickness,180);
pos0(rule_thickness,90);
pos3(bar,180); pos4(bar,180);
z4=z0+ dir (180-45) xscaled ((3u++.24asc_height)+eps-rule_thickness) yscaled ((3u++.24asc_height)+eps-rule_thickness);
z3=z0+ dir (180+45) xscaled ((3u++.24asc_height)+eps-rule_thickness) yscaled ((3u++.24asc_height)+eps-rule_thickness);
z2r=z0;   % was z2l
z9=.381966[.5[z3,z4],z0];
pickup crisp.nib;
filldraw z2r..{z3-z9}z3r---{z9-z3}z3l..z2l--cycle;
filldraw z2l{up}..{left}z0r--z2r--cycle;
endchar;

compute_spread(.45x_height#,.55x_height);
beginchar(123,spread#,math_axis#,0#);
adjust_fit(0,0); pickup rule.nib;
x0=0;
y0=math_axis;
numeric delta; delta=3u++.24asc_height;
z4=z0+ dir (90) xscaled spread yscaled spread;
pickup rule.nib;
rt x40=hround(w);
y40=good.y 1/2[y0,y4];
draw z0{right}..z40..{left}z4;
endchar;

beginchar(124,spread#,math_axis#,0#);
adjust_fit(0,0); pickup rule.nib;
x0=0;
y0=math_axis;
z4=z0+ dir (-90) xscaled spread yscaled spread;
pickup rule.nib;
rt x40=hround(w);
y40=good.y 1/2[y0,y4];
%draw z0..{z4-z0}z40..z4;
draw z0{right}..z40..{left}z4;
endchar;


beginchar(125,18u#,math_axis#,0#);
adjust_fit(0,0);
x0=hround 0; x1=hround(w);
y0=math_axis; y1=math_axis;
numeric theta,delta; theta=angle(z1-z0);
delta=3u;
z2=.5/6[z0,z1];
z8=5.5/6[z0,z1];
z3=1/6[z0,z1] + dir (90+theta) xscaled (delta+eps) yscaled (delta+eps);
z5=3/6[z0,z1] + dir (90+theta) xscaled (delta+eps) yscaled (delta+eps);
z7=5/6[z0,z1] + dir (90+theta) xscaled (delta+eps) yscaled (delta+eps);
z4=2/6[z0,z1] + dir -(90-theta) xscaled (delta+eps) yscaled (delta+eps);
z6=4/6[z0,z1] + dir -(90-theta) xscaled (delta+eps) yscaled (delta+eps);

pickup pencircle scaled rule_thickness;
draw z0--z2--z3--z4--z5--z6--z7--z8--z1;
endchar;

bye.