% Documentation for UW thesis document style for LaTeX
%
%    for uwthesis.cls version 4
%
%    This document is contained in a single file ONLY because
%    I wanted to be able to distribute it easily.  A real thesis ought
%    to be contained on many files (e.g., one for each chapter, at least).
%
%    To help you identify the files and sections in this large file
%    I use the string '==========' to identify new files.
%
%    Printed in twoside style now that that's allowed
 
\documentclass[twoside]{uwthesis}
 
%
% If you like postscript fonts more than computer modern

% \usepackage{newcent}

 
% ==========   Local defs and mods
%
\usepackage{alltt}
\setcounter{tocdepth}{1}  % chapter, sections to toc
\newenvironment{demo}
  {\begin{alltt}\leftskip3em
     \def\\{\ttfamily\char`\\}%
     \def\{{\ttfamily\char`\{}%
     \def\}{\ttfamily\char`\}}}
  {\end{alltt}}

 
% metafont font.  If logo not available, use the second form
%
% \font\mffont=logosl10 scaled\magstep1
\let\mffont=\sf
 
\begin{document}
 
% ==========   Preliminary pages
%

\prelimpages
 
%
% ----- title page
%
\Title{The Suitability of the \LaTeX\ Text Formatter\\
  for Thesis Preparation by Technical and\\
  Non-technical Degree Candidates}
\Author{Jim Fox}
\Year{1995}
% unusual footnote not found in a real thesis
{\Degreetext{A dissertation%
  \footnote[2]{an egocentric imitation, actually}
  submitted in partial fulfillment of\\
  the requirements for the degree of}
 \def\thefootnote{\fnsymbol{footnote}}
 \let\footnoterule\relax
 \titlepage
 }
\setcounter{footnote}{0}
 
% ----- quoteslip
%
\setcounter{page}{-1}
\quoteslip{%
Extensive copying of this demonstration thesis,
including its input files and macro package,
is allowable for scholarly purposes, consistent with ``fair use'' as
prescribed in the U.S. Copyright Law.
Requests for copying or reproduction of this thesis
may be avoided by a simple anonymous ftp to 
\texttt{ftp.u.washington.edu} where the necessary files
may be found in \texttt{/pub/tex/thesis}.
}
 
%
% ----- abstract
%
\Professor{{\em Professor}}
\Department{{\em Department}}
\setcounter{page}{-1}
\abstract{%
This sample dissertation is an aid to students who are attempting
to format their theses with \LaTeX, a sophisticated
text formatter widely available at the University of Washington
and other fine institutions.
 
\begin{itemize}
\item It describes the use of a specialized
macro package developed specifically for thesis production
at the University.
The macros customize \LaTeX\ for the correct thesis style,
allowing the student to concentrate on the substance of
his or her text.%
\footnote{See Appendix A to obtain the source to this
 thesis and the style file.}
\item It demonstrates the solutions to a variety of
formatting challenges found in thesis production.
\item It serves as a template for a real dissertation.
\end{itemize}
}
 
%
% ----- contents & etc.
%
\tableofcontents
\listoffigures
%\listoftables  % I have no tables
 
%
% ----- glossary 
%
\chapter*{Glossary}      % starred form omits the `chapter x'
\addcontentsline{toc}{chapter}{Glossary}
\thispagestyle{plain}
%
\begin{glossary}
\item[argument] replacement text which customizes a \TeX\ macro for
each particular usage.
\item[back-up] a copy of a file to be used when catastrophe strikes
the original.  People who make no back-ups deserve
no sympathy.
\item[control sequence] the normal form of a command to \TeX.
\item[delimiter] something, often a character, that indicates
the beginning and ending of an argument.
More generally, a delimiter is a field separator.
\item[document style] a file of macros that tailors \LaTeX\ for
a particular document.  The macros described by this thesis
constitute a document style.
\item[document style option] a macro or file of macros
that further modifies \LaTeX\ for
a particular document.  The option {\tt[chapternotes]}
constitutes a document style option.
\item[figure] illustrated material, including graphs,
diagrams, drawings and photographs.
\item[font] a character set (the alphabet plus digits
and special symbols) of a particular size and style.  A couple of fonts
used in this thesis are twelve point roman and {\sl twelve point roman
slanted}.
\item[footnote] a note placed at the bottom of a page, end of a chapter,
or end of a thesis that comments on or cites a reference
for a designated part of the text.
\item[formatter] (as opposed to a word-processor) arranges printed
material according to instructions imbedded in the text.
A word-processor, on the other hand, is normally controlled
by keyboard strokes that move text about on a display.
\item[\LaTeX] simply the ultimate in computerized typesetting.
\item[macro]  a user-defined control sequence.
\item[macro package]  a set of macros that combine for a single
purpose.  These thesis macros 
constitute a macro package.
\item[pica] a unit of length.  One pica is twelve points and
six picas is about an inch.
\item[point] a unit of length.  72.27 points equals one inch.
\item[roman]  a conventional printing typestyle. This thesis
is set in roman type.
\item[rule] a straight printed line; e.g., \hrulefill.
\item[table] information placed in a columnar arrangement.
\item[thesis] either a master's thesis or a doctoral dissertation.
This document also refers to itself as a thesis, although it
really is not one.
 
\end{glossary}
 
%
% ----- acknowledgments
%
\acknowledgments{\vskip2pc
  {\narrower\noindent
  The author wishes to express sincere appreciation to the
  University of Washington, where he has had the opportunity
  to work with the \TeX\ formatting system,
  and to Donald Knuth, {\it il miglior fabbro}.
  \par}
}
%
% end of the preliminary pages
 
 
 
%
% ==========      Text pages
%

\textpages
 
% ========== Chapter 1
 
\chapter{Introduction}
 
The utility of a clean, professionally prepared thesis is well
documented%
\footnote{See, for example, W. Shakespeare\cite{Hamlet} for an early treatment.}
and, until recently, a degree candidate had no recourse but
to submit his or her thesis to a typist for completion.
Revisions were difficult and time consuming, and even at its best the
resultant thesis still looked typed.
The advent of computerized typesetting has revolutionized
thesis preparation, and \TeX\ in particular brings to the
university student the power and flexibility of an
`industrial-strength' typesetter.
 
 
\TeX\ is a flexible, complete, and professional typesetting system.
It has been programmed to produce
the same document on all machines, so
a suitable printer can always be found for the final copy
while drafts are made on more conventional and inexpensive printers.
The `suitable' standard is a 300 dot-per-inch laser printer,
which is excellent for thesis production.  Many such laser printers
are available about the campus.
 
\section{The Purpose of This Sample Thesis}
 
This sample is both a demonstration of the quality and
propriety of a \LaTeX\footnote{We mean the \LaTeXe\ version
of \LaTeX.  Earlier versions, now called \LaTeX2.09 were much
different.} formatted thesis, and is 
documentation for the preparation of a thesis.
It has made extensive use of a custom class file
developed specifically for this purpose
at the University of Washington.  Chapter~II discusses
\TeX\ and \LaTeX.
Chapter III describes the additional macros and functions
provided by the custom thesis class file.  Finally, Chapter IV discusses
some special problems due to the inherent differences among the various
computers and printers that support \LaTeX.
 
It is 
impossible to predict all the formatting problems one will encounter
and there will be problems that are best handled
by a specialist.  Help is available at University
Computing Services,
or can very likely be found in the student's own department.
 
 
\section{Conventions and Notations}
 
In this thesis the typist
refers to the user of \LaTeX---the one who
makes formatting decisions and chooses the appropriate
formatting commands.
He or she will most often be the degree candidate.
 
This document deals with \LaTeX\ typesetting commands and their
functions.  Wherever possible the conventions used to display
text entered by the typist and the resulting formatted output
are the same as those used by the \TeX books.
Therefore, {\tt typewriter type} is used to indicate text
as typed by the computer
or entered by the typist.
It is quite the opposite of {\it italics,} which indicates
a catagory rather than exact text.  For example,
{\tt alfa} and {\tt beta} might each be an example of a {\it label}.
 
 
\section{Nota bene}
 
This sample thesis was produced by the \LaTeX\ document class it describes
and is acceptable to the Graduate School%
\cite{SP}.
However, the use of this package does not guarantee acceptability
of a particular thesis,
nor does the Graduate School recommend these macros, or the \TeX\ formatter,
over any other package or formatter.
 
 
% ========== Chapter 2
 
\chapter{A Brief \\ Description of \protect\TeX}
 
The \TeX\ formatting program is the creation of
Donald Knuth of Stanford University.
It has been implemented on nearly every general purpose computer and
produces exactly\footnote{``Exactly'' specifically excludes the
  inherent variety in print devices.}
the same copy on all machines.
 
\section{What is it; why is it spelled that way; 
and what do
really long section titles look like in the text and in the
Table of Contents?}
 
\TeX\ is a formatter.  A document's format is controlled
by commands embedded in its text.
The peculiar look to the names indicate that \TeX\ is also
a typesetting program.  Each character and rule on the page
is precisely positioned.
\LaTeX\ is a special version of \TeX---preloaded
with a volumnous set of macros that simplify most
formatting tasks.
 
\TeX\ uses {\it control sequences} to control
the formatting of a document.  These control sequences are usually
words or groups of letters prefaced with the backslash character
({\tt\char'134}).
For example,
Figure \ref{start-2} shows the text that printed the beginning
of this chapter.  Note the control sequence \verb"\chapter" that
instructed \TeX\ to start a new chapter, print the title, and
make an entry in the table of contents.  It is an example
of a macro defined by the \LaTeX\ macro package.
The control sequence \verb"\TeX", which prints the word \TeX,
is a standard macro from the {\it\TeX book}.
The short control sequence \verb"\\" in the title instructed \TeX\ to
break the title line at that point.
This capability is an example of an extension to \LaTeX\
provided by the thesis document class.
 
\begin{figure}
\begin{demo}
\\chapter\{A Brief\\\\Description of \\TeX\}

The \\TeX\\ formatting program is the creation of
Donald Knuth of Stanford University.
\end{demo}
\label{start-2}
\caption{The beginning of the Chapter II input file.}
\end{figure}
 
Most of the time \TeX\ is simply building paragraphs from
text in the input files.  No control sequences are involved.
New paragraphs are indicated by a blank line in the
input file.
Hyphenation is performed automatically.
 
\section{\TeX books}
 
The primary reference for \LaTeX\ is Lamport's second edition
of the \textit{\LaTeX\ User's Guide}\cite{Lbook}.
It is easily read and should be sufficient for thesis formatting.
See also the \textsl{\LaTeX\ Companion}\cite{companion} for descriptions
of many add-on macro packages.

Although unnecessary for thesis writers the \textsl{\TeX book}
is the primary reference for \TeX sperts worldwide.
 
\section{Mathematics}
 
The thesis macro style does not expand on \TeX's
or \LaTeX's
comprehensive treatment of mathematical equation printing.%
\label{c2note}\footnote{%
% a long footnote indeed.
 Although many \TeX-formatted documents contain no
 mathematics save the page numbers, it seems appropriate
 that this paper, which is in some sense about \TeX,
 ought to demonstrate an equation or two.  Here then, is a statement 
 of the {\it Nonsense Theorem}.
 
 \smallskip
 \def\RR{{\cal R\kern-.15em R}}
 {\narrower\hangindent\parindent Assume a universe $E$ and a symmetric function
  $\$$ defined on $E$, such that for each $\$^{yy}$ there exists a
  $\$^{\overline{yy}}$, where $\$^{yy} = \$^{\overline{yy}}$.
  For each element $i$ of $E$ define
  ${\cal S}(i)=\sum_i \$^{yy}+\$^{\overline{yy}}+0$.
  Then if $\RR$ is that subset of $E$ where $1+1=3$,
  for each $i$
  $$\lim_{\$\to\infty}\int {\cal S}di =
      \cases{0,&if $i\not\in\RR$;\cr
             \infty,&if $i\in\RR$.\cr}$$
  \par}} % end of the footnote
%
The {\it\TeX book}\cite{book}, {\it \LaTeX\ User's Guide}\cite{Lbook},
and {\it The \LaTeX\ Companion}\cite{companion}
thoroughly cover this topic.
 
 
\section{Languages other than English}
 
Most \LaTeX\ implementations at the University are tailored
for the English language.  However, \LaTeX\ will format many
other languages. 
Consult your department or contact the
Humanities and Arts Computing Center for assistance with
non-English formatting.

Unusual characters can be defined via the
font maker \hbox{\mffont METAFONT} (documented by Knuth\cite{Metafont}).
The definitions are not trivial.
Students who attempt to print a thesis with
custom fonts may soon proclaim,
 
% note.  This is not the correct way to print Greek
\medskip
\begin{center}
``$\mathaccent"7027\alpha\pi o\kern1pt\theta\alpha\nu\epsilon\hat\iota\nu$
\ $\theta\acute\epsilon\lambda\omega$.''
 
\end{center}
 
% ========== Chapter 3
 
\chapter{The Thesis Unformatted}
 
This chapter describes the thesis class (\texttt{uwthesis.cls}, version 4)
in detail 
and shows how it was used to format the thesis.
A working knowledge of Lamport's \LaTeX\ manual\cite{Lbook} is assumed.
 
\section{The Control File}
 
The source to this sample thesis is contained in a single file
only because ease of distribution was a concern.
You should not do this.  Your task will be much easier if you
break your thesis into several files:  a file for the preliminary pages,
a file for each chapter,  one for the glossary, and one for each
appendix.  Then include a control file to tie them all together.
This way you can edit and format parts of your thesis much more
efficiently.
 
Figure~\ref{control-file} shows a control file that
might have produced this thesis.
It sets the document style, with options and parameters,
and formats the various parts of the thesis---%
but contains no text of its own.
 
 
%  control file caption and figure
%
\begin{figure}[p]
 \begin{leftfullpage}
  \caption[A thesis control file]%
   {\narrower A thesis control file ({\tt uwthesis.tex}).
   This file is the input to \LaTeX\ that will produce a
   thesis.  It contains no text, only commands which
   direct the formatting of the thesis.
   This is also an example of a `facing page' caption.  It is guaranteed
   to appear on a lefthand page, facing the figure contents on the right.
   See the text.}
  \label{control-file}
 \end{leftfullpage}
\end{figure}
%
\begin{figure}[p]
%
 \begin{fullpage}
  \footnotesize
  \begin{verbatim}
    % LaTeX thesis control file
 
    \documentclass[twoside]{uwthesis}
 
    \begin{document}
 
    % preliminary pages
    %
    \prelimpages
    \input prelim
 
    % text pages
    %
    \textpages
    \input chap1
    \input chap2
    \input chap3
    \input chap4
 
    % bibliography
    %
    \bibliographystyle{plain}
    \bibliography{uwthesis}
 
    % appendices
    %
    \appendix
    \input appxa
    \input appxb
 
    \end{document}
  \end{verbatim}
 \end{fullpage}
\end{figure}
 
The first section defines the document class and options.
This thesis has specified two-sided formatting, which is now
allowed by the Graduate School.
 
A partial thesis is easily formatted by inserting the comment
character ({\tt\%}) before each unwanted section.
 
 
\section{The Text Pages}
 
A chapter is a major division of the thesis.  Each chapter begins
on a new page and has a Table of Contents entry.
 
\subsection{Chapters, Sections, Subsections, and Appendices}
 
 
Within the chapter title use a \verb"\\" control sequence to separate lines
in the printed title (recall Figure \ref{start-2}.).
The \verb"\\" does not affect the Table of Contents entry.
 
Format appendices just like chapters.
The control sequence \verb"\appendix" instructs \LaTeX\ to
begin using the term `Appendix' rather than `Chapter'.
 
 
Sections and subsections of a chapter are specified
by  \verb"\section" and \verb"\subsection", respectively.
In this thesis chapter and section
titles are written to the table of contents.
Consult Lamport\cite[pg. 176]{Lbook} to see which
subdivisions of the thesis can be written to the table of contents.
The \verb"\\" control sequence is not permitted in section and
subsection titles.
 
 
\subsection{Footnotes}
 
\label{footnotes}
 Footnotes format as described in the \LaTeX\ book.  You can also
 ask for end-of-chapter or end-of-thesis notes.
 The thesis class will automatically set these up if
 you ask for the document class option \texttt{chapternotes}
 or \texttt{endnotes}.  
 
If selected, chapternotes will print automatically.  If you choose
endnotes however you must explicitly indicate when to print the notes 
with the command \verb"\printendnotes".  See the style guide for
suitable endnote placement.  

\subsection{Figures and Tables}
Standard \LaTeX\ figures and tables, see Lamport\cite{Lbook},
normally provide the most convenient means to position the figure.
Full page floats and facing captions are exceptions to this rule.

If you want a figure or table to occupy a full page enclose the
contents in a \texttt{fullpage} environment.  
See figures~\ref{facing-caption}.

Facing page captions are described
in the Style Manual \cite{SP}.  They have different meanings
depending on whether you are using
the one-side or two-side thesis style.

If you are using the one-side style, determined by the absence of
\verb"twoside" in your documentclass options,
facing caption pages
are captions for full page figures or tables
and appear on the left-hand page (facing the illustration on the
right-hand page).  
The page number and binding offset are reversed
from their normal positions.
Format these captions by enclosing the float contents
in a \texttt{leftfullpage} environment.
Figure~\ref{control-file}, for example,
required a full page so its caption (on a facing caption page)
would have been formatted as shown in figure~\ref{facing-caption}a.
Because you are printing on only one side of each sheet, you must manually
turn this caption sheet over and insert the illustration following it.

\begin{figure}[t]
\footnotesize
\begin{verbatim}
     \begin{figure}[p]
        \begin{leftfullpage}
           \caption{ . . . }
        \end{leftfullpage}
     \end{figure}
\end{verbatim}
\caption(a)[Generating a facing caption page]{This text would create a
  facing caption page in the one-side thesis style.}
\label{facing-caption}
\end{figure}
 
\begin{figure}[t]
\footnotesize
\begin{verbatim}
     \begin{figure}[p]% the left side caption
       \begin{leftfullpage}
         \caption{ . . . }
       \end{leftfullpage}
     \end{figure}
     \begin{figure}[p]% the right side `empty' space
       \begin{fullpage}
          . . .
          ( note.. no caption )
       \end{fullpage}
     \end{figure}
\end{verbatim}
\caption(b){This text would create a
  double page figure in the two-side style.}
\end{figure}
 
If instead you are using the two-side style, determined by the presence of
\verb"twoside" in your documentclass options,
facing captions
are also full page captions for full page figures or tables
and must face the illustration to which they refer.
You must explicitly format both pages. 
The caption part must appear on an even page
(left side) and the figure or table must
come on the following odd page (right side).
Enclose the float contents for the caption 
in a \texttt{leftfullpage} environment,
and enclose the float contents for the figure or table 
in a \texttt{fullpage} environment.
Figure~\ref{facing-caption}b shows a doublepage figure request.
The first page (left side) contains the caption. The second page
(right side) could be left blank.  A picture or graph might be pasted onto
this space.
 
\subsection{Horizontal Figures and Tables}
Figures and tables may be formatted horizontally
(a.k.a. landscape) as long as their captions appear
horizontal also.  \LaTeX\ will format landscape material for you
if a couple of conditions are met.  You have to have a printer
and printer driver that allow rotations and
you have to have a couple of add-on \LaTeX\ packages.  
Users of PostScript printers and Uniform Access computers 
at the University of Washington will conform to both requirements,
as will users of PC\TeX\ if they use postscript.

Include the \texttt{rotating} package 
\begin{demo}
\\usepackage[figuresright]\{rotating\}
\end{demo}
and read the documentation that comes with the package. 
Documentation can also be found on our systems in
\verb"/usr/local/tex/doc/...".

Figure~\ref{sideways} is an example of how a landscape
table might be formatted. 

\begin{figure}[t]
\footnotesize
\begin{verbatim}
     \begin{sidewaystable}
         ...
         \caption{ . . . }
     \end{sidewaystable}
\end{verbatim}
\caption[Generating a landscape table]{This text would create a
  landscape table with caption.}
\label{sideways}
\end{figure}
 


\subsection{Figure and Table Captions}
Most captions are formatted with the \verb"\caption" macro as described 
by Lamport\cite{Lbook}.  The thesis class extends this macro to allow
continued figures and tables, and to provide multiple figures and
tables with the same number, e.g., 3.1a, 3.1b, etc.
 
To format the caption for the first part of
a figure or table that cannot fit
onto a single page use the standard form:
\begin{demo}
\\caption[\textit{toc}]\{\textit{text}\}
\end{demo}
To format the caption for the subsequent parts of 
the figure or table 
use this caption:
\begin{demo}
\\caption(-)\{(continued)\}
\end{demo}
It will keep the same number and the text of the caption will be 
{\em(continued)}.

To format the caption for the first part of
a multi-part figure or table
use the format:
\begin{demo}
\\caption(a)[\textit{toc}]\{\textit{text}\}
\end{demo}
The figure or table will be lettered (with `a') as well as numbered.
To format the caption for the subsequent parts of 
the multi-part figure or table
use the format:
\begin{demo}
\\caption(\textit{x})\{\textit{text}\}
\end{demo}
where {\em x} is {\tt b}, {\tt c}, \ldots.
The parts will be lettered (with `b', `c', \ldots).

\section{The Preliminary Pages}
 
These are easy to format only because they are relatively invariant
among theses.  Therefore the difficulties have already been encountered
and overcome by \LaTeX\ and the thesis document style.
 
\subsection{Title page}
Define \verb"\Title", \verb"\Author", and \verb"\Year" 
and then print the
title page with \verb"\titlepage".
The title page of this thesis was printed with%
\footnote{Actually, it wasn't.  It included a footnote---unusual for
  title pages.}
 
\begin{demo}
\\Title\{The Suitability of the \\LaTeX\\ Text Formatter\\\\
   for Thesis Preparation by Technical and\\\\
   Non-technical Degree Candidates\}
\\Author\{Jim Fox\}
\\Year\{1995\}
\\titlepage
\end{demo}
 
You may also change other text on the  title page with these
macros.

\begin{list}{}{\itemindent\parindent\itemsep0pt
   \def\makelabel#1{\texttt{\char`\\#1}\hfill}}
\item[Degree\char`\{{\it degree name}\char`\}]
   defaults to ``Doctor of Philosophy''
\item[School\char`\{{\it school name}\char`\}] defaults to
``University of Washington''
\item[Degreetext\char`\{{\it degree text}\char`\}] defaults to
``A dissertation submitted \ldots''
\item[Signatures\char`\{{\it number of signature lines}\char`\}]
   defaults to ``3''
\end{list}

These definitions must appear \underline{before} the \verb"\titlepage" command.

\subsection{Quote slip}
Use the \verb"\quoteslip" macro to format the quote slip.
It has one argument, which is the text of the slip.
The quote slip of this thesis was printed with
\begin{demo}
\\quoteslip\{Extensive copying . . . 98105.\}
\end{demo}
 
\subsection{Abstract}
Define \verb"\Professor" and \verb"\Department" and then print the
abstract with \verb"\abstract".
It has one argument, which is the text of the abstract.
The abstract of this thesis was printed with
 
\begin{demo}
\\Professor\{{\em Professor}\}
\\Department\{{\em Department}\}
\\abstract\{This sample . . . `real' dissertation.\}
\end{demo}
 
 
\subsection{Tables of contents}
Use the standard \LaTeX\ commands to format these items.
 
 
\subsection{Acknowledgments}
Use the \verb"\acknowledgments" macro to format the acknowledgments page.
It has one argument, which is the text of the acknowledgment.
The acknowledgments of this thesis was printed with
 
\begin{demo}
\\acknowledgments\{\\vskip2pc
  \{\\narrower\\noindent
   The author wishes . . . \{\\it il miglior fabbro\}.\\par\}\}
\end{demo}
 
 
\subsection{Dedication}
Use the \verb"\dedication" macro to format the dedication page.
It has one argument, which is the text of the dedication.
 
\subsection{Vita}
Use the \verb"\vita" macro to format the curriculum vitae.
It has one argument, which is your life.
 
 
 
\section{Customization of the Macros}
 
Simple customization, including 
alteration of default parameters,  changes to dimensions,
paragraph indentation, and margins, are not too difficult.
You have the choice of modifing {\tt uwthesis.cls} or loading
one or more personal style files to customize your thesis.
The latter is usually most convienent, since you do not need
a personal copy of {\tt uwthesis.cls} in your directory.

 
% ========== Chapter 4
 
\chapter{Hardware Dependencies\\
  ({\it And Other Complications})}
 
 
\TeX\ has been designed to produce exactly the same document
on all computers and on all printers.  {\it Exactly the same}
means that the various spacings, line and page breaks, and
even hyphenations will occur at the same places
when the document is formatted on a variety of computers.
However, there are some discrepancies that cannot
be overcome.  They involve the mechanics of running \TeX\ and
the necessary variations in computer and
output device capability.
 
\section{Running \protect\LaTeX}
 
Each operating system has some means for editing and storing text,
starting programs, and printing program output.  These
are uniformly inconsistant between machines.  Therefore there
are no useful, generic instructions for running \LaTeX.
You will have to
be able to do the following on your chosen computer.
 
\begin{itemize}
\item Create, edit, and back-up text files.
\item Run the \TeX\ program with \LaTeX\ format.
\item Convert the device independent output
  to a format suitable to the selected printer.
\item Print the converted file.
\end{itemize}
 
There are generally user's manuals available for each \TeX\
implementation, which explain the program's local procedures
and nuances.
 
\section{Fonts}
 
Different printers, and different sites with identical
printers, make certain sets of fonts available for their users.
While these font sets are not identical, they do have a common
subset---the basic roman fonts.
Most sites will also provide fonts at standard magnifications
(\verb"\small", \verb"\large", \verb"\Large", etc.).
The Graduate School wants a larger type than is normally used
for book printing.  The thesis document class uses 12-point.

The postscript font New Century Schoolbook also prints a nice thesis.
Request it with:
\begin{demo}
\\usepackage\{newcent\}
\end{demo}
 
 
\section{Printer Perversity}
 
\begin{flushright}
  \footnotesize \it
  Never let anything mechanical know you are depending on it.
\end{flushright}
 
\medskip
 
A printer will break the day before a dissertation is due.  This is
an immutable law of nature.  Print your dissertation well in advance
of any deadlines.  Take some time to admire your work.
 
%
% ==========   Bibliography
%
\nocite{*}   % include everything in the uwthesis.bib file
\bibliographystyle{plain}
\bibliography{uwthesis}
%
% ==========   Appendices
%
\appendix
\raggedbottom\sloppy
 
% ========== Appendix A
 
\chapter{Where to find the files}
 
The thesis class file, {\tt uwthesis.cls}, contains the parameter settings,
macro definitions, and other \TeX nical commands which
allow \LaTeX\ to format a thesis.  
The source to
the document you are reading, {\tt uwthesis.tex},
contains many formatting examples
which you may find useful.
The bibliography database, {\tt uwthesis.bib}, contains instructions
to BibTeX to create and format the bibliography.
You can find these files in at least the following locations:

\begin{itemize}
\item The \TeX\ library on UCS UNIX computers,

\begin{description}
\item[]  \verb%/usr/local/tex/lib/texmf/tex/latex/uw%
\item[]  \verb%/usr/local/tex/lib/texmf/doc%
\end{description}
\item Anonymous ftp to {\tt ftp.u.washington.edu}    
\begin{description}
\item[]  \verb%pub/tex/thesis%
\end{description}
\item World Wide Web 
\begin{description}
\item[] \verb%http://weber.u.washington.edu/~fox/tex%
\end{description}

\end{itemize}


\end{document}