autoyast2-4.0.69-lp150.2.19.1<>,؉]}⸋/=„)G2TOvDP1 S &"8RNRaH©mQvhfx^-,@RacNĭ>.x_(^fyBT'2f⨌/~ewݧ"153x+'n0Z&NUY$RXv.ԕuٛ!ғ9  q(oPn.ƕ hnj>`e'j;5o=GިGӁTxSC׮`uz@Sq{P|{_>E?d   ?  ".4;` ` ` `  ` ,` ` ` `""`$t%%d&' ''#('+8'49*h:8>dBlFG`H@`I`X Y<ZX[d\h`]`^ bcd>eCfFlHu\`vw`x`yzCautoyast24.0.69lp150.2.19.1YaST2 - Automated InstallationThis package is intended for management of the control files and the AutoYaST2 configurations. This system should only be used by experienced system administrators. Warning: AutoYaST2 performs the installation without any user intervention, warnings, or confirmations (unless specified otherwise in the control file). This file contains YaST2-independent files needed to create installation sources.]}lamb13&openSUSE Leap 15.0openSUSEGPL-2.0-onlyhttp://bugs.opensuse.orgSystem/YaSTlinuxnoarch PNAME=autoinstall SUBPNAME= SYSC_TEMPLATE=/usr/share/fillup-templates/sysconfig.$PNAME$SUBPNAME # If template not in new /usr/share/fillup-templates, fallback to old TEMPLATE_DIR if [ ! -f $SYSC_TEMPLATE ] ; then TEMPLATE_DIR=/var/adm/fillup-templates SYSC_TEMPLATE=$TEMPLATE_DIR/sysconfig.$PNAME$SUBPNAME fi SD_NAME="" if [ -x /bin/fillup ] ; then if [ -f $SYSC_TEMPLATE ] ; then echo "Updating /etc/sysconfig/$SD_NAME$PNAME ..." mkdir -p /etc/sysconfig/$SD_NAME touch /etc/sysconfig/$SD_NAME$PNAME /bin/fillup -q /etc/sysconfig/$SD_NAME$PNAME $SYSC_TEMPLATE fi else echo "ERROR: fillup not found. This should not happen. Please compare" echo "/etc/sysconfig/$PNAME and $TEMPLATE_DIR/sysconfig.$PNAME and" echo "update by hand." fi_IV V Jag_/ l==,].{Xa` ZN\ y -FE,O[ Z1xl"O!88?sex<+d\kP+,"r6Bk1AA큤AA큤A큤AAA큤A큤A큤A큤A큤AA큤A큤A큤AAAAA]}]}\\\\\\\\]}]}\\\\\\\]}\]}]}]}\\\\\\\\\\\\]}]}]}]}]}]}]}]}]}]}\]}VDHVDIVDHVDJVDJVDKVDKVDIVDJVDFVDFVDFVDFVDFVDFVDFVDKVDGVDIV@X43@X.@X,J@X,J@X WSW;W@W/@WWQW@WhWW@WE@W@W~W-@W@W|W|W{@WrfWi,@WgWUeWQq@WEW=WUmUQ@UPUPUL@UJ@UJ@UHUG_@U'@U#UTr@TC@TTTY@TTLTxcTuTto@T;schubi@suse.deJosé Iván López González schubi@suse.deschubi@suse.deschubi@suse.deigonzalezsosa@suse.comknut.anderssen@suse.comknut.anderssen@suse.comschubi@suse.deknut.anderssen@suse.comschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deigonzalezsosa@suse.comigonzalezsosa@suse.comschubi@suse.deigonzalezsosa@suse.comigonzalezsosa@suse.comigonzalezsosa@suse.comlslezak@suse.czigonzalezsosa@suse.comjlopez@suse.comjlopez@suse.comigonzalezsosa@suse.comschubi@suse.deknut.anderssen@suse.comknut.anderssen@suse.comschubi@suse.deigonzalezsosa@suse.comlslezak@suse.czschubi@suse.deaschnell@suse.comjreidinger@suse.comancor@suse.comschubi@suse.deigonzalezsosa@suse.comjreidinger@suse.comjreidinger@suse.commfilka@suse.comschubi@suse.delslezak@suse.czlslezak@suse.czschubi@suse.deschubi@suse.delslezak@suse.czschubi@suse.dejreidinger@suse.comschubi@suse.deschubi@suse.deschubi@suse.deigonzalezsosa@suse.comjsrain@suse.czigonzalezsosa@suse.comschubi@suse.deigonzalezsosa@suse.comjreidinger@suse.comjreidinger@suse.comigonzalezsosa@suse.comrbrown@suse.comschubi@suse.deigonzalezsosa@suse.comschubi@suse.deschubi@suse.deigonzalezsosa@suse.comigonzalezsosa@suse.comigonzalezsosa@suse.comigonzalezsosa@suse.comigonzalezsosa@suse.commfilka@suse.commvidner@suse.comknut.anderssen@suse.comschubi@suse.deschubi@suse.demfilka@suse.comigonzalezsosa@suse.comschubi@suse.deancor@suse.comjlopez@suse.comancor@suse.comigonzalezsosa@suse.comigonzalezsosa@suse.comancor@suse.comschubi@suse.dejlopez@suse.comschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deigonzalezsosa@suse.commfilka@suse.comschubi@suse.deschubi@suse.deschubi@suse.deigonzalezsosa@suse.comschubi@suse.delslezak@suse.czschubi@suse.deigonzalezsosa@suse.comigonzalezsosa@suse.comigonzalezsosa@suse.comigonzalezsosa@suse.comschubi@suse.deigonzalezsosa@suse.comschubi@suse.deschubi@suse.deigonzalezsosa@suse.comkanderssen@suse.comschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.delocilka@suse.comschubi@suse.delocilka@suse.comschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.dejreidinger@suse.comigonzalezsosa@suse.comschubi@suse.deigonzalezsosa@suse.comigonzalezsosa@suse.comschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.delslezak@suse.czschubi@suse.demfilka@suse.comschubi@suse.deigonzalezsosa@suse.comigonzalezsosa@suse.comschubi@suse.deschubi@suse.demvidner@suse.comschubi@suse.deigonzalezsosa@suse.comschubi@suse.deschubi@suse.deigonzalezsosa@suse.comschubi@suse.deschubi@suse.deigonzalezsosa@suse.comschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.delslezak@suse.czschubi@suse.deschubi@suse.deschubi@suse.deigonzalezsosa@suse.comschubi@suse.deschubi@suse.deancor@suse.comigonzalezsosa@suse.comigonzalezsosa@suse.comancor@suse.comschubi@suse.deigonzalezsosa@suse.comigonzalezsosa@suse.comschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.delslezak@suse.czschubi@suse.deschubi@suse.deaschnell@suse.deigonzalezsosa@suse.comschubi@suse.dedvaleev@suse.comaschnell@suse.deschubi@suse.delocilka@suse.comlocilka@suse.comlocilka@suse.comschubi@suse.deschubi@suse.deigonzalezsosa@suse.comschubi@suse.dejsrain@suse.czschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.deschubi@suse.dejreidinger@suse.comschubi@suse.deschubi@suse.deschubi@suse.comlslezak@suse.cz- Reading IPv6 setting in order to initialize it correctly. (bsc#1122660) - 4.0.69- Removed check for available devices. When there are no devices, the proposal issues will be shown (needed for bsc#1130256). - 4.0.68- Fixed conflicting items in rule dialogs (bsc#1123091). - 4.0.67- Removed unneeded flag network_needed in script section. (bsc#1094822) - 4.0.66- Writing security settings in first AY installation stage. So other modules (e.g. users) can rely on these settings now. (bnc#1112769) - 4.0.64- Adapt schema to support the new way of defining a software RAID (fate#326573). - 4.0.64- AutoInstallRules: Do a cleanup of the profile being merged with (bsc#1108933). - 4.0.63- AutoYaST configuration module: Enable edit action for firewall module (fate#324662). - 4.0.62- AutoInstallRules: Fixed crash while merging profiles. (bsc#1105711) - 4.0.61- AutoInstallRules: increased default maxdepth for not crashing with a big software package list (bsc#1104655) - 4.0.60- Installation/Update: Do not call registration if module yast2-registraion is not available in inst-sys (bsc#1098794). - 4.0.59- AY configuration module: Report XML errors while reading an AY configuration file (bsc#1098794) - 4.0.58- Added additional searchkeys to desktop file (fate#321043). - 4.0.57- Showing AutoYaST configuration file errors onetime only. (needed for bnc#1095113) - 4.0.56- Partition configuration: Do not ask for saving values if they have not been changed at all. (bnc#1082556) - 4.0.55- Using new libstorage-ng in order to handle "label" tag in URL. E.G.: autoyast=label://my_home//autoinst.xml (bnc#1094533) - 4.0.54- Handle DASD or zFCP devices even when the profile is not in a remote location (bsc#1089554). - 4.0.53- Allow 'subvolumes' and 'subvolumes_prefix' elements to be empty (bsc#1076337, bsc#1090095 and bsc#1091669). - Drop 'btrfs_set_default_subvolume_name' element. - 4.0.52- Added general API for reporting errors while parsing the AutoYaST configuration file (part of bnc#1089855). - 4.0.51- Display an error and abort the installation when no storage devices are available for installation (bsc#1091033). - 4.0.50- AutoYaST: properly handle empty proposals (bsc#1090390). - 4.0.49- Probe storage devices again after initializing DASD or zFCP devices (bsc#1089326 and bsc#1089554). - 4.0.48- Install the module products also in AutoYaST autoupgrade (related to bsc#1086818 and bsc#1087206) - 4.0.47- Honor partitioning settings from product (bsc#1085755). - 4.0.46- Fix tests to use correct storage instance (part of fate#318196). - 4.0.45- Properly abort when probing devices fails (part of bsc#1083672). - 4.0.44- Do not export an element in the partitioning section (bsc#1013047)- Add-On-Products: Handling error popup for wrong settings. (bnc#1084596) - 4.0.43- Permitted the use of 'listentry' element in all the software AutoYaST schema list entries (bsc#1013047) - 4.0.42- Added more entries to be used instead of the listentry tag when cloning the system (bsc#1013047) - 4.0.41- Improved error message if the base product cannot be found. (follow up of bnc#1084820) - 4.0.40- Reuse encrypted devices when required (bsc#1085439). - 4.0.39- Fixed cloning of the base product name (bsc#1084259) - 4.0.38- Fix in showing/accepting base licenses: Using inst_product_license module instead of ProductLicense.AskLicenseAgreement (bnc#1073324) - 4.0.37- adapted to new activate callbacks in libstorage-ng (see bsc#1082542) - 4.0.36- Add missing textdomains to create proper potfiles (bsc#1083015) - 4.0.35- Manage errors during hardware activation in the same way than normal installation - asking the user and trying to continue if the question times out (related to bsc#1079061). - 4.0.34- Upgrade: Speedup PKG call (bnc#1074082) - 4.0.33- Remove calls to the old yast2-storage layer (bsc#1071978) - Fix AutoYaST UI to to show partitions properly - 4.0.32- fate#319119 - yast2-ca-management is dropped - 4.0.31- fate#323373 - Xinetd and yast2-inetd are not supported. Marking respective autoyast section as obsolete. - 4.0.30- fate#323460 - support for disabling edit action per module. Currently used mainly by the new firewall module - 4.0.29- Report packages which cannot be select for installation (except those packages not included in the AutoYaST profile) (bnc#1077292) - 4.0.28- Speed optimization for the previous fix, the "clone_system" client spent several minutes processing the packages (related to bsc#1077882) - 4.0.27- Avoid using Pkg.ResolvableProperties("", :package, "") calls which require too much memory (bsc#1077882) - 4.0.26- Reporting packages which cannot be selected for installation. (bnc#1077292) - 4.0.25- Selecting evaluated/given product for installation. fate#323450 - 4.0.24- Display more details when the package solver fails- Using ProductFeatures.SetSection instead of ProductFeatures.SetOverlay in order to set product features. This is a follow up of bsc#1070726. - 4.0.23- adapt to yast2 changes in overlays (related to bsc#1070726) - 4.0.22- Upgrade: Adapting to new product handling. (bnc#1075744) - 4.0.21- Fixed merging issues due to bnc#1075182 and bsc#1075334. - 4.0.20- Merging products before package evaluation starts. (bnc#1075182) - 4.0.19- Fix initialization to copy the profile to /tmp/profile again (bsc#1075334) - 4.0.18- always upgrade system via equivalent of 'zypper dup', removing respective control from the profile (bsc#1071708) - 4.0.17- AutoYaST: fix btrfs_set_default_subvolume_name handling (bsc#1073548) - 4.0.16- Warn the user if the infrastructure is not available for running the second stage (bnc#1061754) - 4.0.15- Reinitialize the storage manager when the profile is modified by a pre-script (bsc#1071739) - 4.0.14- adapt to new schema of ntp-client (FATE#323432) - 4.0.13- Drop using ntpdate and instead use NtpClient module for one time sync (FATE#323432) - 4.0.12- Do not ignore start_multipath setting (bsc#1070343). - 4.0.11- Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468). - 4.0.10- Added subvolumes_prefix to schema definition file. (bsc#1013047) - Exporting base products in list format. (fate323450) - 4.0.9- Bring back handling of device=ask (bsc#1069965) - Use a 1-based index when showing partitioning issues - 4.0.8- Cleanup spec file.- Code cleanup (removing old libstorage code). - Adapting rules to storage-ng. - partition_alignment removed because it is not needed anymore by storage-ng. - 4.0.7- Add storage data to ayast_probe client (bsc#1065668) - Handle storage proposal exceptions in a proper way - 4.0.6- When reporting issues with the partition plan, add in which section of the profile were they found (related to bsc#1060637). - 4.0.5- Do not mangle partitioning information coming from yast2-storage-ng when cloning a system (related to bsc#1064875). - 4.0.4- Add basic support for error handling when creating the partition plan (fate#318196). - 4.0.3- Add missing require of Y2Package::Product class (bsc#1064396)- fate#323450 - implemented product selection - 4.0.2- Removed the remains of Kickstart import (bsc#1061620). - 4.0.1- AutoinstConfig: added network_before_proposal flag that will be enable if the network is configured during the first stage. (bsc#1054400) - 4.0.0- ayast_setup: Restarting autoyast-initscripts.service in order to run init-scripts too. (bnc#1057597) - 3.3.9- Rename "y2storage_probed" to "probed". (bnc#1056656) - 3.3.8- fate323450 - export product name when cloning a profile - 3.3.7- Handle packages that are missing a PGP signature although digests are valid (bsc#1054969) - 3.3.6- AY runs in installed system: Writing init scripts again to /var/adm/autoinstall/init.d in order to initilaize init scripts correctly. This is needed for AY runs which do not have an first installation stage (e.g. AY run in KIWI, ayast_setup). (bnc#1052145) - 3.3.5- Merged storage-ng branch (fate#318196). - Note: all changes below with this date belong to the merge. - 3.3.4- storage-ng: refac class StorageProposal and create a new guided proposal by changing settings if it is necessary.- Use the new storage-ng layer to export the current system to the corresponding section of the AutoYaST profile (fate#318196).- Add basic support for customized partitioning using the new storage-ng layer. Currently, only plain partitions are supported (bsc#1044697).- Allow overriding of product's storage partitioning options (bsc#1039481)- storage-ng: commented several Yast.import for the old storage lib. Affected modules not adapted to storage-ng so far.- storage-ng: Enable storage-ng proposal for AutoYaST installation.- storage-ng: fix AutoInstallRules to not use old storage lib. Tests are commented. Removed dependency from (old) yast2-storage, even if it breaks some functionality. - Removed yast2-update as build dependency and added before version (2.18.3) as install dependency. It is only needed for file_from_url.- Classes/rules will be ignored: Due to self-update, the evaluation of classes/rules will be called twice. So we have to initialize the stack for each run again. (bnc#1051483) - 3.3.3- Saving ask-scripts and corresponding log files to /var/adm/autoinstall. (bnc#1049473) - 3.3.2- Crash while writing settings via the menue "File/Apply Profile to this System" in AutoYaST configuration module: As we are switching to "autoinstallation" mode and accessing to the target system we have to set StorageDevices flag disks_valid to true. So InitLibstorage can scan valid target disks. (bnc#1047809) - 3.3.1- AutoYaST configuration module; Crash while writing settings to the system: As we are switching to "normal" mode and accessing to the target system we have to set StorageDevices flag disks_valid to true. So InitLibstorage can scan valid target disks. (bnc#1046738) - 3.3.0- Report shrinked partitions if there is not enough space. (bnc#1039528) - 3.2.16- clone system: Checking if snapshots have been enabled. (bnc#1039268) - 3.2.15- Moved configuration management before software selection in order to select packages which are needed for CM. (FATE#319830) - 3.2.14- Fix subvolumes schema definition (bsc#1013047) - 3.2.13- bnc#1026027 - removed dependency on insserv - 3.2.12- Added configuration-management to first installation step. (FATE#319830) - 3.2.11- Update: Product selection will be done by Packages.SelectProduct now (bnc#1014861). - 3.2.10- Moved services-manager to first installation stage (FATE#321738). - 3.2.9- Add an option to disable the self-update feature through the AutoYaST profile (FATE#319716) - 3.2.8- Cloning Software: install_recommended can be set by the control.xml file (clone_install_recommended_default) Default is true. (Fate#321764) - 3.2.7- Fixed tests to pass with the latest yast2-core and yast2-ruby-bindings packages (related to the bsc#932331 fix) - 3.2.6- Moved post-scripts download from second-stage to first-stage. (bnc#1014859) - 3.2.5- If Btrfs subvolumes are not specified, the default set is created (bsc#1012328)- Fix building on s390x (bsc#1011489) - 3.2.4- Do not crash when services manager configuration is missing (related to bsc#887115) - 3.2.3- Hiding a module in its .desktop file (Hidden=true) won't prevent it from being cloned anymore (bsc#1008301) - Add support to specify resource aliases using the key X-SuSE-YaST-AutoInstResourceAliases in desktop files (related to bsc#887115) - 3.2.2- Do not check certificate for images which have been created by the user/customer. Found while testing bnc#1009023. - 3.2.1- Add support to enable copy-on-write for Btrfs subvolumes (FATE#320342) - Add support to omit the Btrfs default subvolume name (FATE#317775) - 3.2.0- Adding missed desktop file for "clone_system" in order to show it in the control center and command line calls. (bnc#985621) - 3.1.152- Adding an missing PREP partition for PPC, BUT not for Power8 system (powerNV). PowerNV do not have PREP partitions and do not need any because they do not call grub2-install (bnc#989392). - 3.1.151- Fix IP detection in AutoYaST installation rules in order to find the correct profile when "ip route" mentions "metric" (bnc#997548). - 3.1.150- Profile Location: Use Report instead of Popup to not block AutoYast if not configured to. (bnc#988949) - 3.1.149- Fixed: Setting timeout for error popups has not been possible. (bnc#988949) - 3.1.148- Improved logging for broken script descriptions. Still a part of bnc#986049. - 3.1.147- Cloning devices: Devices which are not needed for the installation will be ignored explicitly in the "skip_list". (bnc#989392) - 3.1.146- Added "confirm_base_product_license" to rnc file. (bnc#992535) - 3.1.145- Reintroduced autoyast=usb as a valid URL to AutoYaST profile (bsc#987858) - 3.1.144- Added missed flag "install_recommended" in software section. (bnc#990494) - 3.1.143- Added new [Stop] button for dialogs with timeout. The button shows the current time in seconds till the automatic timeout (bsc#990114). - More possible user actions can now stop the execution to prevent from timeout (bsc#990114). - 3.1.142- Check if AutoYaST "script" elements are hashes. Other entries will be ignored. (bnc#986049) - 3.1.141- Exporting NFS root partition correctly. (bnc#986124) - 3.1.140- Moved ssh_import AutoYaST schema file to yast2-installation package. This is a part of Fate#319624. - 3.1.139- Adapt docu to new AutoYaST developer docu. - 3.1.138- The entry "kexec_reboot" in the Product description can be set by the AutoYaST configuration setting (general/forceboot) and should not be reset by any other Product description file. Fix: Set it again after reading a new Product description. (bnc#981434) - 3.1.137- While AutoYaST installation the user can change the path of the AutoYaST configuration file. Fix: This path will be updated in /etc/install.inf too. (bnc#963487) - 3.1.136- System shutdown: Removed "autoyast" service shutdown. It does not exist anymore. (bnc#986798) - 3.1.135- Speed up installation (bnc#986649) - 3.1.134- Consider AutoYaST keep_install_network as set to 'true' if it's not specified (bsc#984146) - Restore the keep_install_network default behavior present in SLE 12 SP1 and openSUSE Leap 42.1 - 3.1.133- Fixing typo while reporting not supported modules. (part of bnc#955878) - 3.1.132- Rename schema definition regarding SSH keys/configuration so yast2-schema can find it correctly (fate#319624) - 3.1.131- Fix AutoYaST2 schema regarding SSH keys/configuration import feature (fate#319624) - Stop generating autodocs (fate#320356) - 3.1.130- AutoYaST support for ssh_import module. Fate#319624 - 3.1.129- Unsupported sections will be now reported in first installation stage. Reducing log level to warning. (Additional patch for bnc#955878) - 3.1.128- Resetting package selection of previous runs. This is needed because it could be that additional repositories are available meanwhile. (bnc#979691) - 3.1.127- Media-based AutoUpgrade case for feature: No Recommends in * -release RPMs (FATE#320199) - 3.1.126- Upgrade: Removed obsolete bootloader stuff. (bnc#976312) - 3.1.125- Removed obsolete bootloader stuff. (related to FATE#317701) - 3.1.124- Updated schema - added optional URL for the installer self update repository ("general" -> "self_update_url" node) (FATE#319716) - 3.1.123- Remove unused import of dropped BootCommon package. (related to FATE#317701) - 3.1.122- Removed calls of dropped LanUdevAuto module (yast2-network) (bnc#955217, bnc#956605) - 3.1.121- Moved call "uptime" to yast2 package. Cleanup for bnc#956730. - 3.1.120- Evaluate the correct domain, network, product and product version when applying rules (bnc#963137). - 3.1.119- Check uptime instead of system time while waiting for systemd services to be restarted (bsc#956730) - 3.1.118- Fixed crash if the general/mode section has not been defined. (bnc#968080) - 3.1.117- As network configuration will be moved to first installation stage and wickedd should not be restarted in the second stage, all wickedd and network services will not be restarted at all by AutoYaST. (bnc#944349, bnc#955260) - 3.1.116- Moved the body of AutoinstallIoInclude#Get to yast2-update (FATE#316796). - 3.1.115- Confirming base product license. This can be defined by the flag in the general/mode section. Confirming licenses of add-on products can be defined for each product by the flag in the add-on product description. (Fate#318945) - 3.1.114- "haspcmcia" method is removed from the AutoInstallRules API (bnc#964151)- LVM: taking care about "auto" option --> switching to "max". (bnc#962034) - 3.1.113- Fixed rules.xml : OR operator is interpreted as AND. (bnc#961941) - 3.1.112- Fix wrong warning message about the 'init' section not being processed (bsc#962526)- Installation with "autoyast=default". Fixed nil exception error. (bnc#959723) - 3.1.111- Fixed init scripts which have been defined inside an AutoYaST configuration file. (bnc#961320) - 3.1.110- Fix validation of AutoYaST profiles (bsc#954412) - 3.1.109- Downloading init scripts to /mnt during first installation stage. (bnc#960907,bnc#961320) - 3.1.108- Network services can be restarted again, because they do not depend on YaST2-Second-Stage.service anymore. (bnc#954908) - 3.1.107- Added "cobbler" to the obsolete profile section. Defined in SUSE Manager but will not be used anymore. (bnc#955878) - 3.1.106- Do not restart NetworkManager* services while restarting all services in the second installation stage. (bnc#955260) - 3.1.105- Export the already saved software selection when present, fixes exporting wrong package selection caused by deployment of the installation images (bsc#956325, bsc#910728)- Evaluating needed YAST packages which are defined in the AutoYaST configuration file and selecting these packages for installation. (bnc#955657) - 3.1.104- Updating AutoYaST documentation - 3.1.103- Installation workflow: Using ntpdate instead of sntp for time syncing (bnc#953781) - 3.1.102- Add dependency on yast2-pkg-bindings 3.1.31 (or newer) (bsc#953162) - 3.1.101- Ingore restarting of all wickedd* services while finishing the second installation stage. (bnc#944349) - 3.1.100- Cloning system while an installation without AutoYaST: Do not blame if packages are not available anymore because the medium has already been unmounted (e.g. USB device) (bnc#901747) - 3.1.99- Using "backup" or "partitioning_advanced" sections in the profile does not produce an error message anymore (bsc#950294) - 3.1.98- Move lib/ directory to autoyast2-installation package (bsc#949776) - 3.1.97- Handle pkgGpgCheck callback introduced in libzypp 14.39.0 (bsc#948608) - 3.1.96- Enabled translation of some buttons (bsc#948834) - 3.1.95- Writing network settings in first installation stage if the second installation stage has been disabled ("second_stage") in the general/mode section but a "networking" section has also been defined. (bnc#944942) - 3.1.94- Fix premature loading of AutoInstall which prevented running configuration clients during 2nd stage (bsc#944770) - 3.1.93- Move users creation to the first stage, so it is not needed to run the 2nd stage to have a minimal system. - Do no add AutoYaST packages if the second stage won't be executed. - Fixes bnc#892091 - 3.1.92- Do not restart dbus service after installation. Otherwise some other services will hang. (bnc#937900) - 3.1.91- S390: handling cio_ignore Entry in order to set it (values: true/false). If it is not set cio_ignore is true. So it is backward compatible. (bnc#941406) - 3.1.90- Fixed typo in partitioning section (bnc#941096) - 3.1.89- Writing init scipts to installed system in the first installation stage now. The init scrpits will be called while starting the autoyast-initscripts service. So, these scripts will be called while a system upgrade too. (bnc#940823) - 3.1.88- : Must not reinstall already installed packages. (fate#319086) - 3.1.87- Fixed a syntax error in the schema definition (bsc#938459) - 3.1.86- Syncing hardware time before starting installation via ntp. This is configurable via the flag with which the name of the ntp server will be defined. If it is not set no synchronisation will be done. So it is backward compatible. (bnc#935066) - 3.1.85- Added "upgrade" section to generic list. (bnc#935915) - 3.1.84- implemented activation of snapper for btrfs on LVM (bsc#935858) - 3.1.83- Enabled snapshots creation after auto-installation/upgrade (fate#317973) - 3.1.82- Regarding some corner cases of bsc#925381. - - Checking for availability of clients/_auto module before reporting an error. - - Checking if a module supports more than one autoyast configuration section. - 3.1.81- Don't try to format PReP partitions (bsc#927748)- fixed size parameter "auto" for PReP partitions (bsc#928768) - 3.1.80- Added new section "restricts" for ntp configuration (bnc#928987) - 3.1.79- Added 'bootloader' and 'report' into list of supported profile sections (bsc#925381) - 3.1.78- Added libxslt into BuildRequires - needed for running test-cases (bsc#929832) - 3.1.77- Reporting unknown and unsupported profile sections (bnc#925381) - 3.1.76- Evaluate the correct host IP in order to read the proper autoyast.xml file (bnc#928303, bnc#908356, bnc#916628) - 3.1.75- New autoinst flag in general/mode section: activate_systemd_default_target. The default target of systemd will be activated in the second stage of autoyast installation. The default is "true" which is a backward compatible value. (bnc#923992) - 3.1.74- Avoid ayast_probe module crashing when called from an installed system. (bnc#926241) - 3.1.73- New autoinst flag in general/mode section: final_restart_services. Restarting all services after finishing the installation. The default is "true" which is a backward compatible value. (bnc#923992)- load release notes of extensions also during AutoYaST (bnc#893586)- Clone_system in autoyast2-installation should call some modules (e.g. storage, software) which are defined in autoyast2 package. So if needed the user has to install autoyast2 package at first.- Checking if the disk is -partitionable- instead of checking if it is a real disk. Needed for Multipath disks. (bnc#909349) - autoyast=file:/// : Mount the installation source in order to copy AutoYaST configuration file into inst_sys. (bnc#908271)- Selecting needed yast packages for the second stage correctly. (bnc#909751) - 3.1.72- Setting normal mode while applying single module settings to system. (bnc#909223) - 3.1.71- Removed code which will be already done by service_manager. (bnc#909745)- remove X-KDE-Library from desktop file (bnc#899104)- AutoYaST configuration module: Reset menu bar after calling single YAST configuration module. (bnc#872711) - 3.1.69- Fixed too small dialog for autoyast profile location. (bnc#897321) - 3.1.68- Fixed UI in partition configuration. (bnc#901904; bnc#901739) - 3.1.67- Fixed "No base product found" error when evaluating rules/rules.xml file (bnc#900750) - 3.1.66/bin/shyast2-config-autoinstyast2-lib-autoinstyast2-module-autoinstlamb13 1560509922  !"#$%&'()*+,-./0123456789:;<=>?@7BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`4.0.69-lp150.2.19.1 autoinstallclientsautoyast.rbayast_setup.rbclasses_auto.rbgeneral_auto.rbreport_auto.rbscripts_auto.rbsoftware_auto.rbstorage_auto.rbincludeautoinstallclasses.rbconftree.rbdialogs.rbgeneral_dialogs.rbhelps.rbscript_dialogs.rbwizards.rbmodulesAutoinstClass.rbschemaautoyastrncclasses-decl.rncclasses-use.rnccommon.rncfiles.rncgeneral.rncpartitioning.rncprofile-misc.rncpxe.rncreporting.rncrules.rncscripts.rncsoftware.rncYaST2autoyast.desktopclone_system.desktopfiles.desktopgeneral.desktoppartitioning.desktopreport.desktopscripts.desktopsoftware.desktopautoyast2COPYINGhtmlCreateProfile.htmlInvoking.htmlProfile.htmlapp.ay.docupdates.htmlappendix.linuxrc.htmlbk04apd.htmlbook.autoyast.htmlconfiguration.htmlhandlingrules.htmlimagesautoyast-oview.pngautoyast2-maindialog.pngautoyast_rules.pngcms-class-definitions.pngpartitioning-keep1.pngrules_flow.pngindex.htmlintroduction.htmlrulesandclass.htmlstaticcssfonts-onlylocal.cssstyle.cssimagesarrow.pngdots-darkgray.pngdots-gray.pngdots-grayongreen.pngdots-green.pngdots-orange.pngdots-red.pngdraft.pngicon-important.pngicon-note.pngicon-tip.pngicon-warning.pngicons.pnglogo.pngtick.pngjsjquery-1.10.2.min.jsscript.jssysconfig.autoinstallrepositoryclassesrulestemplatestmp/etc//usr/share/YaST2//usr/share/YaST2/clients//usr/share/YaST2/include//usr/share/YaST2/include/autoinstall//usr/share/YaST2/modules//usr/share/YaST2/schema//usr/share/YaST2/schema/autoyast//usr/share/YaST2/schema/autoyast/rnc//usr/share/applications//usr/share/applications/YaST2//usr/share/autoinstall/modules//usr/share/doc/packages//usr/share/doc/packages/autoyast2//usr/share/doc/packages/autoyast2/html//usr/share/doc/packages/autoyast2/html/images//usr/share/doc/packages/autoyast2/html/static//usr/share/doc/packages/autoyast2/html/static/css//usr/share/doc/packages/autoyast2/html/static/images//usr/share/doc/packages/autoyast2/html/static/js//usr/share/fillup-templates//var/lib/autoinstall//var/lib/autoinstall/repository/-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -gobs://build.opensuse.org/openSUSE:Maintenance:10424/openSUSE_Leap_15.0_Update/49ed318cf1ef6dea5edaae0562da594c-autoyast2.openSUSE_Leap_15.0_Updatedrpmxz5noarch-suse-linux   directoryRuby script, ASCII textRuby script, ASCII text, with very long linesASCII textASCII text, with very long linesXML 1.0 document, UTF-8 Unicode text, with very long linesPNG image data, 436 x 523, 8-bit grayscale, non-interlacedPNG image data, 800 x 600, 8-bit/color RGB, non-interlacedPNG image data, 800 x 668, 8-bit/color RGB, non-interlacedPNG image data, 392 x 325, 8-bit grayscale, non-interlacedPNG image data, 465 x 672, 8-bit/color RGB, non-interlacedUTF-8 Unicode textPNG image data, 120 x 15, 8-bit colormap, non-interlacedPNG image data, 2 x 139, 8-bit/color RGBA, non-interlacedPNG image data, 4 x 4, 1-bit colormap, non-interlacedPNG image data, 78 x 300, 8-bit colormap, non-interlacedPNG image data, 36 x 36, 8-bit colormap, non-interlacedPNG image data, 432 x 111, 8-bit/color RGBA, non-interlacedPNG image data, 81 x 38, 8-bit/color RGBA, non-interlacedPNG image data, 20 x 32, 8-bit colormap, non-interlacedPPPPW6r^utf-837a013b0483a71e546a9f9a81f776bcb56793beb5ed4d29b76271466a7df4691?7zXZ !t/]"k%ӑLxU*I9뷷&xDWEɪ sҼDOjfp'ǢG-3]q~rIzV> X5p6X|ʲ-Ym&\lS*$S Sݨ3ãhx'Țާ5@o: {r͢?oxHV%3X"XSN6VHH@ S;Fu ?R[PŚhWԲ)R*]N_B()Ū+s:6񪎙BK0`/z`7W҂3|j  Iބi"cyFam#ed&t6}jdUGfJˠ%tdn_ 4/}g @eX18G:uDҘ(9GEXCLLc\ʽӹ n-ly&߼uH:T y}PL $TRPg?aA[g?e\^wt͎QQ2S)_K; B]ݟ. B^ۘDoˍ?=yk #>-{ ʃ7s!*dI8c)ݵDЫzg_!$/ (`KEL#=9åiút;xw.&%p@| StiTʧ﹕s$ᄫl U=C>[2E@e< ,X:Ě5'P ڇ4xOA%>(;=zugYC]b mfLfy?9N+c<8OdT-yySɿZ_xYnRM؃]z!KG*|#JW3nP!@>VFlr֏NsDo G||\祱$rbBH1AAxW 5!q+w ]0]ρ]t.ru[}߿oP?ŘA.^*EyצK76岚Tr{&PNq}9: 'G54z}_ Ve톽WTYKEx&Q hxL4=K*פN u}?B!f}h ^#(;-S#_%6d_툪T,G+4}c|sጝ 竗(D=G[bem=P1$ohL$1 lt2I/Jئ!GS^Dӕ W hN0R++owZȫSdPfZ-%av3ADN"5c@j2gM.?ѦM2PH xtV"5wxI YZ